Husqvarna 325HE3 Starting and Stopping, Check before starting, Starting and stopping, Cold engine

Page 14

STARTING AND STOPPING

Check before starting

•Inspect the working area. Remove any objects that could be thrown out.

•Check the cutting attachment. Never use blades that are dull, cracked or damaged.

•Check that the machine is in perfect working order. Check that all nuts and screws are tight.

•Make sure the gear housing is lubricated correctly. See instructions under the heading Gear housing.

•Check that the cutting attachment always stops when the engine is idling.

•Only use the machine for the purpose it was intended for.

•Make sure that the handle and safety features are in good working order. Never use a machine that lacks a part or has been modified outside its specifications.

•All covers must be correctly fitted and undamaged before you start the machine.

Starting and stopping

Starting

WARNING! The complete clutch cover and

!gear housing must be fitted before the machine is started, otherwise the clutch may come loose and cause personal injury.

Always move the machine about 3 metres from the refuelling position before starting. Place the machine on a firm surface. Remember that the blades may start to move when the engine is started. Make sure the blades cannot come into contact with any object. Make sure that no unauthorised persons are in the working area, otherwise there is a risk of serious personal injury.

Cold engine

Ignition: Set the stop switch to the start position.

Choke: Set the choke control in the choke position. This should automatically set the stop switch to the start position.

Air purge: Press the air purge diaphragm repeatedly until fuel begins to fill the diaphragm. The diaphragm need not be completely filled.

Warm engine

Ignition: Set the stop switch to the start position.

Choke: Set the throttle to the start position by moving the choke control to the choke position and then returning it to its original position.

14 – English

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Operator’s manual EPA KEY to Symbols SymbolsContents Personal protective equipment Safety InstructionsMachine′s safety equipment Cutter guard 325HDA55 Vibration damping systemMuffler Hand guard Cutter guard Gear housingBlades Starting General safety precautionsFuel safety Transport and storageSafety instructions while working Safety instructions when using the hedge trimmerSafety instructions regarding the surroundings Safety instructions after completing workBasic working techniques Changing the hedge trimmer angleWhat is WHAT? What is what?Assembly Fuelling Fuel HandlingFuel Starting and stopping Starting and StoppingCheck before starting Cold engineStopping Maintenance CarburettorHigh speed jet H Correctly adjusted carburettorMuffler Spark plug Cleaning the air filterCooling system Air filterMaintenance schedule Gear housingCleaning and lubrication Technical Data Technical dataFederal Emission Control Warranty Statement Your Warranty Rights and Obligations1140176-95

325HE3 specifications

The Husqvarna 325HE3 is an advanced, reliable, and versatile professional hedge trimmer designed for both efficiency and comfort. This robust tool is well-suited for landscapers, gardeners, and maintenance professionals who require powerful performance in various trimming and shaping tasks.

One of the key features of the 325HE3 is its powerful 25.4cc X-Torq engine. This engine technology ensures maximum power output while minimizing fuel consumption and exhaust emissions. This makes the trimmer not only environmentally friendly but also cost-effective for prolonged use. The lightweight design of the engine contributes to lower overall weight, enhancing maneuverability during operation.

The Husqvarna 325HE3 boasts a unique articulated cutting head with a 135-degree range of adjustment. This allows for precise cutting at various angles, ensuring that users can reach tight spots and trim hedges effectively without straining their bodies. The cutting blades are double-sided and are constructed from hardened steel, providing long-lasting sharpness and durability while minimizing wear and tear.

Comfort is a major consideration in the design of the 325HE3. It features a cushioned rear handle and an ergonomic front handle that allows for a firm grip and reduces vibration during use. This ergonomic design helps reduce operator fatigue, enabling longer periods of operation without discomfort. The trimmer also comes equipped with a protective blade cover that ensures safety during storage and transport.

In addition, the Husqvarna 325HE3 incorporates advanced technologies such as LowVib, which minimizes vibrations during operation, contributing to user comfort and reducing the risk of long-term injuries. The air filtration system is designed to prolong engine life and enhance performance by keeping the airflow clean and efficient.

The ease of maintenance is also a highlight of the Husqvarna 325HE3. The easily accessible components allow for quick inspections and servicing, making it user-friendly for people seeking to keep their equipment in top condition.

Overall, the Husqvarna 325HE3 is a professional-grade hedge trimmer that seamlessly combines power, ergonomics, and advanced features, making it a preferred choice for those who demand excellence in their landscaping tools. Whether for commercial use or personal gardening projects, it stands out as a reliable companion for all trimming needs.
Top Page Image Contents