Federal Emission Control Warranty Statement

FEDERAL EMISSION CONTROL WARRANTY STATEMENT

YOUR WARRANTY RIGHTS AND OBLIGATIONS

The EPA (The US Environmental Protection Agency), Environment Canada and Husqvarna Forest & Garden are pleased to explain the emissions control system warranty on your 2001 and later small nonroad engine. In U.S. and Canada, new small nonroad engines must be designed, built and equipped to meet the federal stringent anti-smog standards. Husqvarna Forest & Garden must warrant the emission control system on your small nonroad engine for the period of time listed below provided there has been no abuse, neglect or improper maintenance of your unit.Your emmission control system includes Parts such as the carburetor and the ignition system. Where a warrantable condition exists, Husqvarna Forest & Garden will repair your small nonroad engine at no cost to you. Expenses covered under warranty include diagnosis, parts and labor.

MANUFACTURER′S WARRANTY

COVERAGE

The 2001 and later small nonroad engines are warranted for two years. If any emission related part on you engine (as listed above) is defective, the part will be repaired or replaced by Husqvarna Forest & Garden.

OWNER′S WARRANTY

RESPONSIBILITIES

As the small nonroad engine owner, you are responsible for the performance of the required maintenance listed in your Operator′s Manual. Husqvarna Forest & Garden recommends that you retain all receipts covering maintenance on your small nonroad engine, but Husqvarna Forest & Garden cannot deny warranty solely for the lack of receipts or for your failure to ensure the performance of all scheduled maintenance. As the small nonroad engine owner, you should, however, be aware that Husqvarna Forest & Garden may deny you warranty coverage if your small nonroad engine or a part of it has failed due to abuse, neglect, improper maintenance, unapproved modiﬁcations or the use of parts not made or approved by the original equipment manufacturer. You are responsible for presenting your small nonroad engine to a Husqvarna Forest & Garden authorized servicing dealer as soon as a problem exists. The warranty repairs should be completed in a reasonable amount of time, not to exceed 30 days. If you have any questions regarding your warranty rights and responsibilities, you should contact your nearest authorized servicing dealer or call Husqvarna Forest & Garden at 1-800-487-5963

WARRANTY COMMENCEMENT DATE

The warranty period begins on the date small nonroad engine is delivered.

LENGTH OF COVERAGE

Husqvarna Forest & Garden warrants to the initial owner and each subsequent purchaser that the engine is free from defects in materials and workmanship which cause the failure of a warranted part for a period of two years.

WHAT IS COVERED

REPAIR OR REPLACEMENT OF PARTS Repair or replacement of any warranted part will be performed at no charge to the owner at an approved Husqvarna Forest & Garden servicing dealer. If you have any questions regarding your warranty rights and responsibilities, you should contact your nearest authorized servicing dealer or call Husqvarna Forest & Garden at 1-800-487-5963

WARRANTY PERIOD Any warranted part which is not scheduled for replacement as required maintenance, or which is scheduled only for regular inspection to the effect of “repair or replace as necessary” shall be warranted for 2 years. Any warranted part which is scheduled for replacement as required maintenance shall be warranted for the period of time up to the ﬁrst scheduled replacement point for that part.

DIAGNOSIS The owner shall not be charged for diagnostic labor which leads to the determination that a warranted part is defective, if the diagnostic work is performed at an approved Husqvarna Forest & Garden servicing dealer.

CONSEQUENTIAL DAMAGES Husqvarna Forest & Garden may be liable for damages to other engine components caused by the failure of a warranted part still under warranty.

WHAT IS NOT COVERED

All failures caused by abuse, neglect or improper maintenance are not covered.

ADD -ON OR MODIFIED PARTS

The use of add-on or modiﬁed parts can be grounds for disallowing a warranty claim. Husqvarna Forest & Garden is not liable to cover failures of warranted parts caused by the use of add-on or modiﬁed parts.

HOW TO FILE A CLAIM

If you have any questions regarding your warranty rights and responsibilities, you should contact your nearest authorized servicing dealer or call Husqvarna Forest & Garden at 1-800- 487-5963

WHERE TO GET WARRANTY SERVICE

Warranty services or repairs shall be provided at all Husqvarna Forest & Garden authorized servicing dealers.

MAINTENANCE, REPLACEMENT AND REPAIR OF EMISSION-RELATED PARTS

Any Husqvarna Forest & Garden approved replacement part used in the performance of any warranty maintenance or repairs on emission-related parts, will be provided without charge to the owner if the part is under warranty.

EMISSION CONTROL WARRANTY PARTS LIST

1Carburetor and internal parts

2Intake pipe, airﬁlter holder and carburetor bolts.

3Airﬁlter and fuelﬁlter covered up to maintenance schedule.

4Ignition System

1 Spark Plug, covered up to maintenance schedule

2 Ignition Module

5Mufﬂer with catalytic converter

MAINTENANCE STATEMENT

The owner is responsible for the performance of all required maintenance, as deﬁned in the operator’s manual.

English – 21

325HE3 specifications

The Husqvarna 325HE3 is an advanced, reliable, and versatile professional hedge trimmer designed for both efficiency and comfort. This robust tool is well-suited for landscapers, gardeners, and maintenance professionals who require powerful performance in various trimming and shaping tasks.

One of the key features of the 325HE3 is its powerful 25.4cc X-Torq engine. This engine technology ensures maximum power output while minimizing fuel consumption and exhaust emissions. This makes the trimmer not only environmentally friendly but also cost-effective for prolonged use. The lightweight design of the engine contributes to lower overall weight, enhancing maneuverability during operation.

The Husqvarna 325HE3 boasts a unique articulated cutting head with a 135-degree range of adjustment. This allows for precise cutting at various angles, ensuring that users can reach tight spots and trim hedges effectively without straining their bodies. The cutting blades are double-sided and are constructed from hardened steel, providing long-lasting sharpness and durability while minimizing wear and tear.

Comfort is a major consideration in the design of the 325HE3. It features a cushioned rear handle and an ergonomic front handle that allows for a firm grip and reduces vibration during use. This ergonomic design helps reduce operator fatigue, enabling longer periods of operation without discomfort. The trimmer also comes equipped with a protective blade cover that ensures safety during storage and transport.

In addition, the Husqvarna 325HE3 incorporates advanced technologies such as LowVib, which minimizes vibrations during operation, contributing to user comfort and reducing the risk of long-term injuries. The air filtration system is designed to prolong engine life and enhance performance by keeping the airflow clean and efficient.

The ease of maintenance is also a highlight of the Husqvarna 325HE3. The easily accessible components allow for quick inspections and servicing, making it user-friendly for people seeking to keep their equipment in top condition.

Overall, the Husqvarna 325HE3 is a professional-grade hedge trimmer that seamlessly combines power, ergonomics, and advanced features, making it a preferred choice for those who demand excellence in their landscaping tools. Whether for commercial use or personal gardening projects, it stands out as a reliable companion for all trimming needs.