Husqvarna Essential Assembly Guide and Parts for the 325HE3 Trimmer
Page 12

ASSEMBLY

Fitting the hand guard and loop handle

(325HDA55,325HE3)

1Assemble the hand guard and loop handle by screwing them together. Take care to align the holes in both parts.

2Slide the loop handle and hand guard onto the shaft.

3Slide the spacer into the slot in the loop handle.

4Fit the nut and screw. Do not overtighten.

5Now make a final adjustment to give yourself a comfortable working position. Tighten the screw. CAUTION! The loop handle and hand guard must not be fitted behind the arrow marked on the shaft.

Fitting the handle

(325HE3,325HE4)

Fit the handle using two screws.

Fitting the cutting head

It is important that the hedge trimmer is laid on a flat surface when you fit the cutting head. Otherwise the cutting head may not be fitted straight.

1Fit the cutting head to the shaft. CAUTION! Make sure the drive shaft inside the shaft engages with the recess in the cutting head.

2 Tighten the lower screw first, then the upper screw.

Adjusting the harness

(325HE4)

You should always use the harness with the machine to give maximum control over the machine and reduce the risk of fatigue in your arms and back.

1Put on the harness.

2Hook the machine onto the harness support hook.

3Adjust the length of the harness so that the support hook is roughly level with your right hip.

Fitting the impact guard

(325HE4)

Fit the guard using the three screws and washers. Fit the two short screws in hole A. Tighten the screws to a torque of 4 Nm. After the machine has been in use for around 20 hours, re-tighten the screws to 4 Nm.

12 – English

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Operator’s manual EPA KEY to Symbols SymbolsContents Safety Instructions Machine′s safety equipmentPersonal protective equipment Vibration damping system MufflerCutter guard 325HDA55 Hand guard Gear housing BladesCutter guard General safety precautions Fuel safetyStarting Transport and storageSafety instructions when using the hedge trimmer Safety instructions regarding the surroundingsSafety instructions while working Safety instructions after completing workBasic working techniques Changing the hedge trimmer angleWhat is WHAT? What is what?Assembly Fuel Handling FuelFuelling Starting and Stopping Check before startingStarting and stopping Cold engineStopping Maintenance CarburettorCorrectly adjusted carburettor MufflerHigh speed jet H Cleaning the air filter Cooling systemSpark plug Air filterGear housing Cleaning and lubricationMaintenance schedule Technical Data Technical dataFederal Emission Control Warranty Statement Your Warranty Rights and Obligations1140176-95

325HE3 specifications

The Husqvarna 325HE3 is an advanced, reliable, and versatile professional hedge trimmer designed for both efficiency and comfort. This robust tool is well-suited for landscapers, gardeners, and maintenance professionals who require powerful performance in various trimming and shaping tasks.

One of the key features of the 325HE3 is its powerful 25.4cc X-Torq engine. This engine technology ensures maximum power output while minimizing fuel consumption and exhaust emissions. This makes the trimmer not only environmentally friendly but also cost-effective for prolonged use. The lightweight design of the engine contributes to lower overall weight, enhancing maneuverability during operation.

The Husqvarna 325HE3 boasts a unique articulated cutting head with a 135-degree range of adjustment. This allows for precise cutting at various angles, ensuring that users can reach tight spots and trim hedges effectively without straining their bodies. The cutting blades are double-sided and are constructed from hardened steel, providing long-lasting sharpness and durability while minimizing wear and tear.

Comfort is a major consideration in the design of the 325HE3. It features a cushioned rear handle and an ergonomic front handle that allows for a firm grip and reduces vibration during use. This ergonomic design helps reduce operator fatigue, enabling longer periods of operation without discomfort. The trimmer also comes equipped with a protective blade cover that ensures safety during storage and transport.

In addition, the Husqvarna 325HE3 incorporates advanced technologies such as LowVib, which minimizes vibrations during operation, contributing to user comfort and reducing the risk of long-term injuries. The air filtration system is designed to prolong engine life and enhance performance by keeping the airflow clean and efficient.

The ease of maintenance is also a highlight of the Husqvarna 325HE3. The easily accessible components allow for quick inspections and servicing, making it user-friendly for people seeking to keep their equipment in top condition.

Overall, the Husqvarna 325HE3 is a professional-grade hedge trimmer that seamlessly combines power, ergonomics, and advanced features, making it a preferred choice for those who demand excellence in their landscaping tools. Whether for commercial use or personal gardening projects, it stands out as a reliable companion for all trimming needs.
Top Page Image Contents