Echo 99944200485 manual Equipment

Page 6

6

equipment

WARNING

Use this attachment with ECHO approved models only. Serious injury may result from the use of this attachment combined with a non approved ECHO product.

Before operation a complete check of the unit must be performed;

•Check unit for loose/missing nuts, bolts and screws. Tighten and/or replace as needed.

•Never adjust blades when the engine is operating.

•Check that the blade assembly is firmly attached and in safe operating condition. Dull, loose or damaged blades should not be used.

WARNING

Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all

openings.

•ALWAYS stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop before removing obstructions, clearing debris, or servicing unit.

•DO NOT start or operate unit unless all guards and protective covers are properly assembled to unit.

•NEVER reach into any opening while the engine is running. Moving parts may not be visible through openings.

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Shaft Hedge Clipper Attachment Introduction Safety manualTable of Contents Operators manualSafety Manual safety symbols and important information International symbolsShaft Hedge Clipper Attachment Operator s Manual Personal condition and safety equipment Repetitive Stress Injuries Read the ManualsEquipment Description Contents Assembly Power head shaft/lower shaft assemblyFront loop handle removal OperationHedge trimming Skill levels MaintenanceMaintenance intervals LubricationGear Housing Assembly Drive Shaft AssemblyShaft Hedge Clipper Attachment 11 Operators Manual Sharpening blades Blade adjustment Shaft Hedge Clipper Attachment 13 Operators ManualSpecifications Storage Hook InstallationStorage Shaft Hedge Clipper Attachment 15 Operators Manual Servicing Information parts/serial number ServiceWarranty registration Additional or replacement manuals Echo consumer product support
Top Page Image Contents