Echo PAS-280 specifications Power Head Shaft/Lower Shaft Assembly, Support Handle Installation

Page 13

PAS-280

ASSEMBLY

ASSEMBLY

Power Head Shaft/Lower Shaft Assembly

Parts Required:

PAS Attachment

1.Set Power Head/Shaft Assembly on a level surface.

2.Pull locator pin (A) out, and turn counter-clockwise 1/4 turn to lock-out position.

3.Remove vinyl cap from attachment drive shaft.

4.Remove cardboard spacer, if necessary.

5.Carefully fit attachment drive shaft assembly into coupler (B) to decal assembly line (C), making sure that the inner lower drive shaft engages the square upper drive shaft socket.

Note: Lower bearing housing and head assembly must be in line with the engine.

6.Rotate locator pin (A) 1/4 turn clockwise to engage lower shaft hole. Insure locator pin is fully engaged by twisting lower drive shaft. Locator pin should snap flush in coupler. Full engagement will prevent further shaft rotation.

7.Secure lower shaft assembly to coupler by tightening clamping knob (D).

Support Handle Installation

Note: Label shows minimum spacing for support handle location.

1.Position support handle for comfortable operation and secure screws.

For more information scan this QR code.

B

D

A

C

MIN

SPACING

X7502312904

13

© 1/2014 ECHO Inc.

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Burn Hazard Operator’s ManualTable of Contents Servicing Information IntroductionAdditional or Replacement Manuals SafetyManual Safety Symbols and Important Information On / OFF International SymbolsPersonal Condition and Safety Equipment Repetitive Stress Injuries Vibration and ColdEquipment EPA 2010 and Later and/or C.A.R.B. Tier Emission Control Exhaust & EvaporativeProduct Emission Durability Emission Compliance Period Description Description Contents Power Head Shaft/Lower Shaft Assembly AssemblySupport Handle Installation Fuel OperationFuel Requirements After use Handling FuelPurge Bulb Starting Cold EngineStopping Engine Starting Warm EngineMaintenance Intervals MaintenanceSkill Levels Fuel Filter Air FilterCooling System Spark PlugSpark Arrestor Screen Exhaust SystemExhaust Port Cleaning Carburetor AdjustmentEngine Break-In High Altitude OperationDrive Shaft Upper LubricationMaintenance Engine Problem Troubleshooting Chart TroubleshootingLong Term Storage Over 30 Days StorageModel SpecificationsEcho Approved Optional Attachments SpecificationsOWNER’S Responsibility Warranty StatementsWarranty Statements PAS-280 ECHO, Incorporated
Top Page Image Contents