OPERATION | |
|
|
Starting Warm Engine
The starting procedure is the same as Cold Start except DO NOT close the choke, and do not depress throttle trigger to wide open position.
The attachment should not move at idle, otherwise serious personal injury may result.
Note: If attachment moves, readjust carburetor according to “Carburetor Adjustment” instructions in this manual or see your ECHO Dealer.
1.Stop Switch
Move stop switch button (A) forward away from the STOP position.
2.Purge Bulb
Pump purge bulb (C) until fuel is visible in the “Clear” fuel return line.
3.Recoil Starter
Lay the unit on a flat area and keep movable attachment parts clear of all obstacles. Firmly grip throttle handle and throttle trigger lockout with left hand. Rapidly pull recoil starter handle/rope (D) until engine fires.
Note: If engine does not start after 5 pulls, use Cold Start Procedure.
A
C
D
Stopping Engine
1. Throttle | A |
Release throttle trigger and allow engine to return to idle before shutting off engine.
2.Stop Switch
Move stop switch button (A) backward to STOP position.
If engine does not stop when stop switch is moved to STOP position, close choke - COLD START position - to stall
engine. Have your ECHO dealer repair stop switch before using unit again.
X7502312904 | 17 |
© 1/2014 ECHO Inc.