Echo SRM-225I manual Nylon line head installation, To advance trimmer line, Nylon line replacement

Page 10

10

nylon line head installation

Tools Required: Head Locking Tool.

Parts Required: Nylon Line Head.

Caution

Wear Gloves or personal injury may result:

•Cutoff knife is sharp.

•Gearcase and surrounding area may be hot.

1.Be sure adapter plate (C) remains on PTO shaft (A).

2.Align locking hole in upper plate with notch in edge of gear hous- ing and insert head locking tool (D).

3.Thread line head (E) onto shaft by turning it counter-clockwise until head is tight against adapter plate (C).

4.Remove locking tool (D).

IMPORTANT

Semi-automatic nylon line heads must be used only with plastic debris shield with cut-off knife. Using nylon line heads with metal debris shield can result in trimmer damage, caused by operation with excessive line length.

to advance trimmer line

Tip:

To advance trimmer line, tap trimmer head against the ground while the head is turning at normal operating speed.

nylon line replacement

See Maintenance Section for nylon line replacement.

remove nylon line head

Note

Do not disassemble nylon line head.

1.Align locking hole in upper plate with notch in edge of gear hous- ing and insert head locking tool (D).

2.Remove line head (E) by turning it clockwise until head is com- pletely off of shaft.

3.Remove locking tool (D).

A

C

D

E

D

E

Image 10

Contents Grass Trimmer/Brush Cutter Introduction Safety manualTable of Contents Operators manualPersonal condition and safety equipment Safety Manual safety symbols and important informationInternational symbols Grass Trimmer /Brush Cutter Operator s ManualHand Protection Physical ConditionEye Protection Hearing ProtectionClear the Work Area Repetitive Stress InjuriesRead the Manuals Keep a Firm GripEmission Control exhaust & evaporative EquipmentEPA 2010 and Later and/or C.A.R.B. Tier Grass Trimmer /Brush Cutter Operator s Manual Description Hot Decal near muffler Shaft DecalPage Contents Assembly Plastic shield installationTo advance trimmer line Nylon line head installationNylon line replacement Remove nylon line headGrass Trimmer/Brush Cutter Operators Manual Front handle installationOperation Grass/Weed Blades Require Operation with bladesPreparing the Trimmer/Brush Cutter for Blade Use Brush/Clearing Blades RequireChoosing the Correct Blade Fuel Fuel RequirementsHandling Fuel Starting cold engine Purge BulbStarting warm engine Grass Trimmer/Brush Cutter 17 Operators ManualStopping engine Maintenance intervals MaintenanceSkill levels Air filter Fuel filterSpark plug Cooling systemExhaust system Grass Trimmer/Brush Cutter 21 Operators ManualSpark Arrestor Screen Exhaust Port Cleaning Engine Break-In Carburetor adjustmentHigh Altitude Operation Lubrication Gear HousingDrive Shaft Nylon line replacement Page Sharpening metal blades Troubleshooting Engine Problem Troubleshooting ChartLong Term Storage over 30 days StorageSpecifications Model SRM-225Warranty Statements Exceptions99922201032 12/03/09 01/2010 Page Grass Trimmer/Brush Cutter 35 Operators Manual Servicing Information parts/serial number ServiceWarranty registration Additional or replacement manuals Echo consumer product support