Echo SRM-225I manual Air filter, Fuel filter

Page 19

Grass Trimmer/Brush Cutter 19

Operator's Manual

air filter

Level 1.

Tools required: 25 - 50 mm (1 - 2 in.) Cleaning Brush

Parts required: REPOWERTM AIR & FUEL FILTER KIT.

1.Close choke (Cold Start Position []). This prevents dirt from entering the carburetor throat when the air filter is removed. Brush accumulated dirt from air cleaner area.

2.Remove air filter cover. Brush dirt from inside cover.

3.Remove air filter and lightly brush debris from filter. Replace filter if it is damaged, fuel soaked, very dirty, or the rubber sealing edges are deformed.

4.If filter can be reused, be certain it:

Fits tightly in the air filter cavity.

Is installed with the original side out.

5.Install air filter cover.

fuel filter

Level 1.

Tools required: 200 - 250 mm (8 - 10 in.) length of wire with one end bent into a hook, clean rag, funnel, and an approved fuel container

Parts required: REPOWERTM AIR & FUEL FILTER KIT.

DANGER

Fuel is VERY flammable. Use extreme care when mixing, storing or handling, or serious personal injury may result.

1.Use a clean rag to remove loose dirt from around fuel cap and empty fuel tank.

2.Use the “fuel line hook” to pull the fuel line and filter from the tank.

3.Remove the filter from the line and install the new filter.

Image 19
Contents Grass Trimmer/Brush Cutter Operators manual Safety manualTable of Contents IntroductionGrass Trimmer /Brush Cutter Operator s Manual Safety Manual safety symbols and important informationInternational symbols Personal condition and safety equipmentHearing Protection Physical ConditionEye Protection Hand ProtectionKeep a Firm Grip Repetitive Stress InjuriesRead the Manuals Clear the Work AreaEmission Control exhaust & evaporative EquipmentEPA 2010 and Later and/or C.A.R.B. Tier Hot Decal near muffler Shaft Decal Grass Trimmer /Brush Cutter Operator s Manual DescriptionPage Assembly Plastic shield installation ContentsRemove nylon line head Nylon line head installationNylon line replacement To advance trimmer lineGrass Trimmer/Brush Cutter Operators Manual Front handle installationOperation Brush/Clearing Blades Require Operation with bladesPreparing the Trimmer/Brush Cutter for Blade Use Grass/Weed Blades RequireChoosing the Correct Blade Fuel Requirements FuelHandling Fuel Purge Bulb Starting cold engineStarting warm engine Grass Trimmer/Brush Cutter 17 Operators ManualStopping engine Maintenance intervals MaintenanceSkill levels Fuel filter Air filterCooling system Spark plugExhaust system Grass Trimmer/Brush Cutter 21 Operators ManualSpark Arrestor Screen Exhaust Port Cleaning Engine Break-In Carburetor adjustmentHigh Altitude Operation Lubrication Gear HousingDrive Shaft Nylon line replacement Page Sharpening metal blades Engine Problem Troubleshooting Chart TroubleshootingStorage Long Term Storage over 30 daysModel SRM-225 SpecificationsExceptions Warranty Statements99922201032 12/03/09 01/2010 Page Grass Trimmer/Brush Cutter 35 Operators Manual Echo consumer product support ServiceWarranty registration Additional or replacement manuals Servicing Information parts/serial number