Craftsman 358.796131- 26.2CC Quick Reference, Fueling, Starting the Engine, Maintenance

Page 27

I

I

I IIII

IIIIII

QUICK REFERENCE PAGE

Read and follow all Safety Rules, Precautions and Operating Instructions. Failure to do so can cause in serious personal injury.

PAGE

PREPARATION

3

1.Know all safety rules and precautions in this manual.

2.Wear safety glasses or goggles for eye protection

3.Dress safely - bootsor safety shoes, long pants.

4.Check for worn, loose, missing or damaged parts and repair.

5.Inspect and ensure the area to be cut issafe.

6.Keep children, bystanders,and animals a minimum of 30 feet (10 meters) away from the work area.

FUELING

6-7

1.Eliminate all sources of sparks or flame where fuel is mixed, poured or stored.

2.Use fuel not over 2 months old.

3.Mix and pour fuel in an approved, marked container in an outdoor area.

4.Use 1 part air-cooled, 2-cycle, engine oil to 16 parts regular unleaded gasoline.

5.Move a minimum of 10 feet (3 meters) away from fuel and fueling site before starting engine.

STARTING THE ENGINE

7- 8

1.Extend a minimum of 4 inches of line from the cutting head.

2.Place unit on ground away from objects and on-lookers.

3.Keep the throttle trigger depressed until engine runs.

4.Press injectorbutton as indicated on page 8.

5.Pull the starter rope sharply and quickly.

OPERATING THE UNIT

..........................................................

9- 11

1.Accelerate the engine to the desired speed before cutting.

2.Release the trigger and allow the engine to idle when not cutting.

&Make sure the cutting head stopstuming when the throttletrigger is released.

4. Stop the engine by moving the ignitionswitch to the "off" position,

ADVANCING THE CUTTING LINE

10

1.Operate the engine at full throttle.

2.Hold cutting head parallel to grassy area of ground.

3.Tap cutting head lightlyon the ground once.

MAINTENANCE

14

1.Drain all fuel from the unit before storingfor more than 30 days.

2.Disconnect spark plug before performing any maintenance except for carburetor adjustment.

3.Clean air filter frequently but always after 5 hours of operation or 5 tanks of gas whichever is less.

4.Lubricatethe flexible drive shaft after each 10 hours of operation and after storingfor more than 90 days.

5.Store in a dry place out of the reach of children.

I]11 II II]] I]1

I]]111

II

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents RnFT,SMn Specifications Table of ContentsOperate Your Unit Safely Aiknow Your UnitPlan Ahead Handle Fuel with CautionKnow Your Weedwacker Trimmer IntroductionUnpacking Instructions Read Your Operators Manual AssemblyAssemblysteps PreparationAutomotive OIL EngineinformationFuelingyour Unit Fuel MixtureStarting Instructions HOW Fuel Injection Starting TM Works PRE-OPERATION ChecksAfter starting and engine runs smoothly Starting ProcedureBelow 30F Temperature Pull starter rope quickly and sharply until engine startsCarburetor Adjustments =OPERATING InstructionsSpark Plug Inspect the area to be cut Using Your UnitOperating Instructions Advancing the Cutting LineTrimming Cutting MethodsAlways cut left to right RightwrongClean dirt and debris from housing Cutting Head Maintenance Cutting Line ReplacementSpool Replacement Line Limiter MaintenanceTAP Button Normal Spool Worn Spool Wipethe Flexible Drive Shaft LubricationAIR Filter Care Fuel Tank UpkeepStarter Rope Repair Trouble CauseRemedy Accessories Accessories101 2628 STD KEY Part QTY Description Pari Recl REQSears Weedwacker Parts List -- Model 358.796131-26.2cc 511010 15274 Decals 26568 KEY Part QTY NO. NO. REQKEY Part QTY REQ 15123 15479 26O32 10738 16563Sears Weedwacker Parts List -- Model 358.796131-26.2cc 32 19105 33 21055 34 19131 35 26047 4205954I 15127 39114 Spring Starter DogQTY KEY Part REQ Description KEY Part NO. noPage Page Starting the Engine MaintenanceQuick Reference Fueling358.796131 Sears Service Is AT Your Service

358.796131- 26.2CC specifications

The Craftsman 358.796131 is a robust and reliable 26.2CC gas-powered string trimmer designed for both homeowners and professionals who require efficient gardening tools. Equipped with a powerful 26.2cc 2-cycle engine, this string trimmer delivers dependable performance for a variety of lawn care tasks, including trimming, edging, and clearing overgrown areas.

One of the standout features of the Craftsman 358.796131 is its lightweight and ergonomic design. Weighing in at only 11.5 pounds, this trimmer is comfortable to handle, allowing users to operate it for extended periods without fatigue. The well-balanced construction ensures optimal maneuverability, making it easy to navigate around flower beds, trees, and other obstacles in your yard.

In terms of technology, the Craftsman 358.796131 incorporates the Easy Start system, which significantly reduces the effort required to start the engine. This feature minimizes the pull required on the starter cord, allowing for quick and hassle-free starts every time. This is particularly beneficial for users who may struggle with traditional starting methods, as it enhances the overall user experience.

The trimmer is also equipped with a 17-inch cutting swath, allowing users to cover more ground in less time. The dual-line bump feed head provides a continuous flow of line, ensuring that the cutting area is maximized with minimal interruptions. The ability to easily advance the line by simply bumping the head against the ground allows for convenient operation while working in various terrains.

Another noteworthy characteristic of the Craftsman 358.796131 is its durability. The trimmer is constructed with high-quality materials and components designed to withstand the rigors of regular use in tough outdoor conditions. The solid build ensures longevity, making it a worthwhile investment for anyone looking to keep their outdoor spaces well-maintained.

Moreover, the Craftsman trimmer includes a variety of attachments and accessories, enhancing its versatility. These accessories can help tackle different tasks, from edging to clearing taller weeds and brush.

In conclusion, the Craftsman 358.796131 is a powerful, user-friendly, and versatile solution for lawn care enthusiasts. Its combination of performance, technology, and durability makes it an excellent choice for both residential and professional lawn maintenance, ensuring that users can achieve a well-groomed yard with ease and efficiency.
Top Page Image Contents