Craftsman 358.796131- 26.2CC Aiknow Your Unit, Plan Ahead, Handle Fuel with Caution

Page 3

SAFETY RULES AND PRECAUTIONS

Failure to follow safety rules and precautions could result in serious personal injury.

AIKNOW YOUR UNIT

1.Read your Operator's Manual carefully until you completely understand and can follow

all safety rules, precautions and operating instructions before operating the unit.

2 Restrict your unit to users who understand and follow all safety rules, precautions, and operating instructions found in this manual.

B. PLAN AHEAD

Always wear eye protection. The

1.splash deflector/line iimiter will not prevent rocks and debris from being

thrown or ricocheting into the eyes --andface which can result In loss of vision or

serious personal injury.

2.Dress safely in long pants and wear boots or safety shoes. Do not wear loose clothing, jewelry, short pants or sandals; or go barefoot.

3.Do not operate the unit when you are tired, ill, or upset; or if you have taken alcohol or drugs/medication.

4.Inspect the area to be cut before starting the unit. Remove all debris and objects that can

ricochet,be thrown, become entangledinthecutting head, or cause injuryor damage during cutting.

5.Keep children, bystanders and animals a safe distance away from the work area --a minimum of 30 feet (10 meters).

C.HANDLE FUEL WITH CAUTION

1.Eliminate all sources of sparks or flame (in- eluding smoking, open flames, or work that could cause sparks) in the areas where fuel is mixed, poured, or stored.

2.Mix and pour fuel in an outdoor area; store fuel in a cool, dry, well-ventilated place; and use an approved, marked container for all fuel purposes.

3.DO .n_oLsmoke while handling fuel or while operating the unit.

4.Wipe up all spills before starting the eng'ine.

5.Move at least 10 feet (3 meters) away from fuel and fueling site before starting the engine.

De

El

OPERATE YOUR UNIT SAFELY

1.Inspect the entire unit before each use for loose, missing or damaged parl_Do not use until the unit isin proper workingorder.

2.Use only flexible, non-metalic, monofilament cutting line. Do notuse othermaterialssuch as rope, wire,etc. Wire can break off during cutting and be - come a dangerous missile.

3.Make sure the cutting head stops turning when the throttle trigger is released and the engine runs at idle speed. For correction, refer to "Carburetor Adjustments," page 9.

4.Keep the handles free of oil and fuel.

5.Never start or run the engine inside a closed room or building. Exhaus[ _LJmes contain dangerous carbon monoxide.

. Keep your body clear of the cutting head while the unit is in use.

7.Do not operate in a position over waist high.

8.Do not overreach. Keep firm footing and balance at att times.

9.Run the engine at full throttle only when cutting.

10.Stop the engine before removing the fuel cap.

11.Use only for jobs explained in this manual.

MAINTAIN YOUR UNIT PROPERLY

1.Maintain the unit according to recommend. ed procedures.

2.Disconnect spark plug before performing maintenance except for carburetor adjustment.

3.Use only recommended replacement •parts. The use of any part, or accessory not specifically designed forthis unit could create a hazard and/or void your warranty.

4.Drain fuel from the fuel tank before storing for 30 or more days.

5.Do not store theunit or fuel in a closed area

where fuelvaporsocan reach sparks or an open flame from hot water heaters, furnaces,etc.

6.Store in a dry ar.ea out of the reach of children.

i_WAR NI NG

The lower unit of this machine is designed as a line trimmer only, and must not be equipped with any type blade. Serious injury can occur to the user or bystanders because:

The necessary protective devices for blade use are not part of-the lower unit.

--Some blades are not designed for the high speed

this engine produces. This can cause Injury due to blade failure.

Do not use any attachment with this engine other than those supplied by the manufacturer and specifically recommended for this power head. Serious injury to the user or damage to the engine can result otherwise,

STATE AN D LOCAL

ORDINANCE REQUIREMENTS

Your engine is equipped with a temperature limiting muffler and spark arresting screen which meets the requirements of California Codes 4442 and 4443. All U.S. Forest Land and the states of California, Maine,

Oregon, and Washington require bylaw that certain inter- nal combustion engines operated on forest, brush, and grass covered areas be equipped with a temperature limiting muffler and/or spark .arresting screen. If you

operate an internal combustion engine in a state or locale where such regulations exist, you are legally responsible for maintaining the operating condition of these parts. Failure to do so can subject you to liability or to a fine.

Page 2 Page 4
Image 3
Page 2 Page 4
Contents RnFT,SMn Specifications Table of ContentsOperate Your Unit Safely Aiknow Your UnitPlan Ahead Handle Fuel with CautionKnow Your Weedwacker Trimmer IntroductionUnpacking Instructions Read Your Operators Manual AssemblyAssemblysteps PreparationAutomotive OIL EngineinformationFuelingyour Unit Fuel MixtureStarting Instructions HOW Fuel Injection Starting TM Works PRE-OPERATION ChecksAfter starting and engine runs smoothly Starting ProcedureBelow 30F Temperature Pull starter rope quickly and sharply until engine startsCarburetor Adjustments =OPERATING InstructionsSpark Plug Inspect the area to be cut Using Your UnitOperating Instructions Advancing the Cutting LineTrimming Cutting MethodsAlways cut left to right RightwrongClean dirt and debris from housing Cutting Head Maintenance Cutting Line ReplacementSpool Replacement Line Limiter MaintenanceTAP Button Normal Spool Worn Spool Wipethe Flexible Drive Shaft LubricationAIR Filter Care Fuel Tank UpkeepStarter Rope Repair Trouble CauseRemedy Accessories Accessories101 2628 STD KEY Part QTY Description Pari Recl REQSears Weedwacker Parts List -- Model 358.796131-26.2cc 511010 15274 Decals 26568 KEY Part QTY NO. NO. REQKEY Part QTY REQ 15123 15479 26O32 10738 16563Sears Weedwacker Parts List -- Model 358.796131-26.2cc 32 19105 33 21055 34 19131 35 26047 4205954I 15127 39114 Spring Starter DogQTY KEY Part REQ Description KEY Part NO. noPage Page Starting the Engine MaintenanceQuick Reference Fueling358.796131 Sears Service Is AT Your Service

358.796131- 26.2CC specifications

The Craftsman 358.796131 is a robust and reliable 26.2CC gas-powered string trimmer designed for both homeowners and professionals who require efficient gardening tools. Equipped with a powerful 26.2cc 2-cycle engine, this string trimmer delivers dependable performance for a variety of lawn care tasks, including trimming, edging, and clearing overgrown areas.

One of the standout features of the Craftsman 358.796131 is its lightweight and ergonomic design. Weighing in at only 11.5 pounds, this trimmer is comfortable to handle, allowing users to operate it for extended periods without fatigue. The well-balanced construction ensures optimal maneuverability, making it easy to navigate around flower beds, trees, and other obstacles in your yard.

In terms of technology, the Craftsman 358.796131 incorporates the Easy Start system, which significantly reduces the effort required to start the engine. This feature minimizes the pull required on the starter cord, allowing for quick and hassle-free starts every time. This is particularly beneficial for users who may struggle with traditional starting methods, as it enhances the overall user experience.

The trimmer is also equipped with a 17-inch cutting swath, allowing users to cover more ground in less time. The dual-line bump feed head provides a continuous flow of line, ensuring that the cutting area is maximized with minimal interruptions. The ability to easily advance the line by simply bumping the head against the ground allows for convenient operation while working in various terrains.

Another noteworthy characteristic of the Craftsman 358.796131 is its durability. The trimmer is constructed with high-quality materials and components designed to withstand the rigors of regular use in tough outdoor conditions. The solid build ensures longevity, making it a worthwhile investment for anyone looking to keep their outdoor spaces well-maintained.

Moreover, the Craftsman trimmer includes a variety of attachments and accessories, enhancing its versatility. These accessories can help tackle different tasks, from edging to clearing taller weeds and brush.

In conclusion, the Craftsman 358.796131 is a powerful, user-friendly, and versatile solution for lawn care enthusiasts. Its combination of performance, technology, and durability makes it an excellent choice for both residential and professional lawn maintenance, ensuring that users can achieve a well-groomed yard with ease and efficiency.
Top Page Image Contents