Craftsman 358.796131- 26.2CC Using Your Unit, Operating Instructions, Advancing the Cutting Line

Page 10

USING YOUR UNIT

Your Trimmer is equipped with a semi-automaticadvancing cutting head that cuts with the tip of a monofilament nylon line.

The nylon cutting line will easily remove grass and weeds from around walls, fences, trees, and flower beds, but it also can cut the tender bark of trees or shrubs and scar fences. For this reason, it is very important to learn the proper techniques of cutting around and near objects.

The nylon cutting line will wear faster and will

require being advanced more frequently when you are cutting against rocks, bricks,concrete, metal fences, etc., than against trees or wooden fences.

The cuttinghead will wear prematurely:

--if allowed to continuously contact the ground during normal cutting.

--if the line limiter is not kept sharp.

WARNING

Use only flexible, non-metalic, monofllament cutting line. Do not use other materials such as rope, wire, etc. Wire can break off during cutting and become a dangerous missile.

A. OPERATING INSTRUCTIONS

1.Read your Operator's Manual.

Make certain you completely understand and follow all safety rules, precautions, and operating instruc- tions before operating the unit.

,

Always wear eye protection. The

 

splash deflector/line limiter will not

 

prevent rocks and debris from being

 

thrown or ricocheting into the eyes

 

and face which can result in loss of vision or

 

serious personal injury.

3.Dress safely in long pants-and wear boots or safety shoes.

Do not wear Iooseclothing, jewelry, short pants or sandals; or go barefoot.

4.Check the unit before operation.

Lookfor worn, loose, missing,ordamaged parts. Do not use until the unit is in properworking order.

,Inspect the area to be cut.

Remove all debris and objects that can ricochet, be thrown,become entangledinthe cuttinghead orother- wise cause injuryor damage during cutting.

6.Keep observers, children, bystanders, and animals safely away.

Beforestarting the engine and during operation,make certainchildren,animalsand bystandersare awayfrom the work area - a minimum of 30 feet (10 meters).

B. ADVANCING THE CUTTING LINE

• The cutting line is extended semi-automatically by

tapping thebottom ofthe head on the ground with

.the engine_running.

k.• Approximately 2 Inches oflinelsextended each time the tap button is tapped on the ground,

•The line,miter on the splash deflector cuts line to a maximum allowable length.

•The most efficient cutting line length Is the max- imum length allowed by the line Iimiter.

1.To advance line:

a.Operate the engine at fullthrottle.

b.Hold cutting head parallel to and above the grassy area of the ground.

c.Tap the cutting head lightly on the ground one time. See Figure 12. Approximately 2 inches of line will be advanced after each tap.

NOTE: If the line is worn down to two inches or less, more than one tap may be required to obtain the most efficient line cutting length.

2.Always keep the splash deflector in place when the unit Is being operated.

-3. Keep the line Iimitersharpfor fast, easycut-off.

See page 13for sharpening instructions.

NOTE: Always tap the cutting head on a grassy area of the ground. Tapping on surfaces such as concrete or asphalt can cause excessive wear to the cutting head.

LINE

CUTTING LINE,

LIMITER

TAP LIGHTLY

CUTS EXCESS

ON GROUND

LINE

ONE TIME

 

TO ADVANCE

 

-q

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents RnFT,SMn Table of Contents SpecificationsHandle Fuel with Caution Aiknow Your UnitPlan Ahead Operate Your Unit SafelyIntroduction Know Your Weedwacker TrimmerUnpacking Instructions Preparation AssemblyAssemblysteps Read Your Operators ManualFuel Mixture EngineinformationFuelingyour Unit Automotive OILPRE-OPERATION Checks Starting Instructions HOW Fuel Injection Starting TM WorksPull starter rope quickly and sharply until engine starts Starting ProcedureBelow 30F Temperature After starting and engine runs smoothly=OPERATING Instructions Carburetor AdjustmentsSpark Plug Advancing the Cutting Line Using Your UnitOperating Instructions Inspect the area to be cutRightwrong Cutting MethodsAlways cut left to right TrimmingCutting Head Maintenance Cutting Line Replacement Clean dirt and debris from housingLine Limiter Maintenance Spool ReplacementTAP Button Normal Spool Worn Spool Fuel Tank Upkeep Drive Shaft LubricationAIR Filter Care Wipethe FlexibleStarter Rope Repair Cause TroubleRemedy Accessories Accessories101 2628 KEY Part QTY Description Pari Recl REQ STDSears Weedwacker Parts List -- Model 358.796131-26.2cc 15123 15479 26O32 10738 16563 KEY Part QTY NO. NO. REQKEY Part QTY REQ 511010 15274 Decals 26568Sears Weedwacker Parts List -- Model 358.796131-26.2cc Spring Starter Dog 4205954I 15127 39114 32 19105 33 21055 34 19131 35 26047KEY Part NO. no QTY KEY Part REQ DescriptionPage Page Fueling MaintenanceQuick Reference Starting the EngineSears Service Is AT Your Service 358.796131

358.796131- 26.2CC specifications

The Craftsman 358.796131 is a robust and reliable 26.2CC gas-powered string trimmer designed for both homeowners and professionals who require efficient gardening tools. Equipped with a powerful 26.2cc 2-cycle engine, this string trimmer delivers dependable performance for a variety of lawn care tasks, including trimming, edging, and clearing overgrown areas.

One of the standout features of the Craftsman 358.796131 is its lightweight and ergonomic design. Weighing in at only 11.5 pounds, this trimmer is comfortable to handle, allowing users to operate it for extended periods without fatigue. The well-balanced construction ensures optimal maneuverability, making it easy to navigate around flower beds, trees, and other obstacles in your yard.

In terms of technology, the Craftsman 358.796131 incorporates the Easy Start system, which significantly reduces the effort required to start the engine. This feature minimizes the pull required on the starter cord, allowing for quick and hassle-free starts every time. This is particularly beneficial for users who may struggle with traditional starting methods, as it enhances the overall user experience.

The trimmer is also equipped with a 17-inch cutting swath, allowing users to cover more ground in less time. The dual-line bump feed head provides a continuous flow of line, ensuring that the cutting area is maximized with minimal interruptions. The ability to easily advance the line by simply bumping the head against the ground allows for convenient operation while working in various terrains.

Another noteworthy characteristic of the Craftsman 358.796131 is its durability. The trimmer is constructed with high-quality materials and components designed to withstand the rigors of regular use in tough outdoor conditions. The solid build ensures longevity, making it a worthwhile investment for anyone looking to keep their outdoor spaces well-maintained.

Moreover, the Craftsman trimmer includes a variety of attachments and accessories, enhancing its versatility. These accessories can help tackle different tasks, from edging to clearing taller weeds and brush.

In conclusion, the Craftsman 358.796131 is a powerful, user-friendly, and versatile solution for lawn care enthusiasts. Its combination of performance, technology, and durability makes it an excellent choice for both residential and professional lawn maintenance, ensuring that users can achieve a well-groomed yard with ease and efficiency.
Top Page Image Contents