Craftsman 358-79104 Unit / Maintenance Safety, Fuel Safety, Transporting and Storage

Page 4

UNIT / MAINTENANCE SAFETY

_,WARNING:

Stop unit and dis-

connect the spark plug before per- forming maintenance (except carbure- tor adjustments).

•Look for and replace damaged or loose parts before each use. Look for and repair fuel leaks before use. Keep in good working condition.

•Replace trimmer head parts that are chipped, cracked, broken, or dam-

aged in any other way before using the unit.

•Maintain unit according to recom- mended procedures. Keep cutting line at proper length.

•Use only Craftsman_R_brand replace- ment line. Never use wire, rope, string, etc.

•Install required shield properly before using the unit. Use only specified trim- mer head; make sure it is properly installed and securely fastened.

•Make sure unit is assembled cor- rectly as shown in this manual.

•Make carburetor adjustments with lower end supported to prevent line from contacting any object.

•Keep others away when making car- buretor adjustments.

•Use only recommended Craftsman accessories and replacement parts.

•Have all maintenance and service not explained in this manual per-

formed by a Sears Service Center.

FUEL SAFETY

•Mix and pour fuel outdoors.

•Keep away from sparks or flames.

•Do not smoke or allow smoking near fuel or the unit or while using the unit.

•Avoid spilling fuel or oil. Wipe up all fuel spills before starting engine.

•Move at least 10 feet (3 meters) away from fueling site before start- ing engine. Stop engine and allow it to cool before removing fuel cap.

•Empty the fuel tank before storing or transporting the unit. Use up fuel left in the carburetor by starting the en- gine and letting it run until it stops.

•Store unit and fuel in area where fuel

vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc.

•Always store gasoline in a container approved for flammable liquids.

TRANSPORTING AND STORAGE

•Stop the unit before carrying.

•Allow engine to cool before storing or transporting in vehicle.

•Empty the fuel tank before storing or transporting the unit. Use up fuel left in the carburetor by starting the en- gine and letting it run until it stops.

•Store unit and fuel in area where

fuel vapors cannot reach sparks or open flames from water heaters,

electric motors or switches, furnaces, etc.

•Store unit so line limiter blade can- not accidentally cause injury. The unit can be hung by the shaft.

•Store unit out of reach of children.

This unit is not equipped with an anti- vibration system and is intended for occasional use only.

SAFETY NOTICE: Exposure to vibra- tions through prolonged use of gaso- line powered hand tools could cause blood vessel or nerve damage in the fingers, hands, and joints of people prone to circulation disorders or ab-

normal swellings. Prolonged use in cold weather has been linked to blood

vessel damage in otherwise healthy people. If symptoms occur such as numbness, pain, loss of strength, change in skin color or texture, or loss of feeling in the fingers, hands, or

joints, discontinue the use of this tool and seek medical attention. An anti-

vibration system does not guarantee the avoidance of these problems. Us- ers who operate power tools on a con- tinual and regular basis must monitor

closely their physical condition and the condition of this tool.

SPECIAL NOTICE: This unit is

equipped with a temperature limiting muffler and spark arresting screen

which meets the requirements of Cali- fornia Codes 4442 and 4443. All U.S.

forest land and the states of California, Idaho, Maine, Minnesota, New Jersey, Oregon, and Washington require by law that many internal combustion en- gines be equipped with a spark arrest- ing screen. If you operate in a locale where such regulations exist, you are legally responsible for maintaining the

operating condition of these parts. Failure to do so is a violation of the

law. For normal homeowner use, the muffler and spark arresting screen will not require any service. After 50 hours of use, we recommend that your muf-

fler be serviced or replaced by a Sears Service Center.

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Operators Manual 545140962 12/15/06Oneyear Full Warranty on Craftsman GAS Weedwacker Sears, Roebuck and Co., Hoffman Estates, ILOperator Safety This power unit can be dangerous! Op4WARNING Fuel Safety Unit / Maintenance SafetyTransporting and Storage Line Trimmer Safety Edger SafetyBlowernacuum Safety Blade rotatesBrushcutter Safety Cultivator SafetyHedge Trimmer Safety Pole Pruner SafetySnow Thrower Safety Carton ContentsAssembly MentAdjusting the Handle Attaching ShieldKnowyour Trimmer Primer BulbStart Lever Before Starting EngineConvertible TM Feature Starting Warm EngineYour Unit Starting Flooded EngineInstalling Optional Attach MentsOperating Instructions Operating Position Always USEHowto Stop Your Unit Cutting MethodsMowing TrimmingMaintenance Schedule MaintenanceAIR Filter Inspect Muffler and Spark Arresting ScreenCarburetor Adjustment Line ReplacementReplace Spark Plug Idle Speed Adjustment Seasonal StorageFuel System OtherTroubleshooting Cause RemedyYour Warranty Rights and OB Warranty CommencementEmission Control Warranty MAINTENANCE, Replacement and Repair of Emission RE41 I 61 I 81

358-79104 specifications

The Craftsman 358-79104 is a robust and reliable string trimmer designed to make yard maintenance more efficient and enjoyable. This versatile tool is ideal for both homeowners and landscaping professionals who require a powerful solution for cutting grass, weeds, and underbrush in various terrains.

One of the standout features of the Craftsman 358-79104 is its 25cc, 2-cycle engine. This powerful engine provides ample power to tackle tough trimming tasks with ease. The 2-cycle design ensures high performance while remaining lightweight, making it easy to maneuver around your yard without straining. The engine is also designed for easy starting, reducing the frustration often associated with starting gas-powered equipment.

Another significant feature of the Craftsman 358-79104 is its flexible cutting head design. This trimmer comes with a dual line bump head that allows for a wider cutting swath. The ability to easily feed line by simply bumping the head on the ground is a convenient touch that eliminates the need to stop and rethread the line frequently. This feature not only enhances productivity but also allows for cleaner cuts, promoting healthier grass growth.

The ergonomic design of the Craftsman 358-79104 is built for user comfort. It features an adjustable handle that can be customized to fit the operator's height, reducing fatigue during extended use. The soft-grip handle also provides added comfort and better control, ensuring a precise and comfortable cutting experience.

Another innovative characteristic of this trimmer is its versatile design; it can be easily converted into other tools, such as a brush cutter or edger, by simply attaching compatible accessories. This multi-functional capability greatly enhances the value of the Craftsman 358-79104, making it a worthy investment for anyone looking to maintain their landscape.

In summary, the Craftsman 358-79104 string trimmer delivers a powerful, efficient, and versatile solution for yard maintenance. With its strong 25cc 2-cycle engine, flexible cutting options, ergonomic design, and multi-functionality, this trimmer is a reliable choice for achieving a well-groomed lawn. Whether you're performing routine trimming or tackling overgrown areas, the Craftsman 358-79104 is engineered to handle the job with ease and precision.
Top Page Image Contents