Craftsman 358-79104 Knowyour Trimmer, Primer Bulb, Start Lever, Before Starting Engine

Page 10

KNOWYOUR TRIMMER

READ THiS OPERATOR'SMANUAL AND SAFETY RULES BEFORE OPERATING YOUR

UNIT. Compare the illustrations with your unit to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference.

 

 

Assist Handle

 

 

Coupler

Trimmer

Shaft

 

 

 

Head

N_

ON/OFF Switch

 

Shield

Starter Handle

 

 

Primer Bulb

 

 

Throttle

Line

Limiter

Trigger

Blade

 

Start Lever

Muffler

ON/OFF SWITCH

The ON/OFF switch is located on the trigger handle and is used to stop the engine. Move the switch to the OFF position to stop the engine.

PRIMER BULB

The PRIMER BULB removes air from the carburetor and fuel lines and fills them with fuel. This allows you to start the engine with fewer pulls on the starter rope. Activate the primer bulb by pressing it and allowing it to return to its original form.

START LEVER

The START LEVER helps to supply fuel to the engine to aid in starting. Acti- vate the starting system by moving the start lever to the START position. DO NOT squeeze the throttle trigger until the engine has started and runs. After the engine starts, allow the engine to warm-up 5 seconds, then fully squeeze the throttle trigger to deacti- vate the starting system (start lever returns to RUN position).

COUPLER

The COUPLER enables optional at- tachments to be installed on the unit.

BEFORE STARTING ENGINE

_WARNING:

Be sure to read

the fuel information in the safety rules before you begin. If you do not under- stand the safety rules, do not attempt to fuel your unit. Call 1-800-235-5878.

FUELING ENGINE

,_WARNING:

Remove fuel cap

slowly when refueling.

This engine is certified to operate on unleaded gasoline. Before operation, gasoline must be mixed with a good quality synthetic 2-cycle air-cooled en- gine oil. We recommend Craftsman

brand synthetic oil. Mix gasoline and oil at a ratio of 40:1. A 40:1 ratio is ob-

tained by mixing 3.2 ounces of oil with 1

gallon of unleaded gasoline. Included with this trimmer is a 3.2 ounce contain-

er of oil. Pour the entire contents of this container into 1 gallon of gasoline to

achieve the proper fuel mixture. DO NOT USE automotive oil or marine oil.

These oils will cause engine damage. When mixing fuel, follow instructions printed on container.

Once oil is added to gasoline, shake container momentarily to assure that the fuel is thoroughly mixed. Always read and follow the safety rules relat- ing to fuel before fueling your unit.

IMPORTANT

Alcohol blended fuels (called gasohol or using ethanol or methanol) can at- tract moisture which leads to separa- tion and formation of acids during star-

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Operators Manual 545140962 12/15/06Oneyear Full Warranty on Craftsman GAS Weedwacker Sears, Roebuck and Co., Hoffman Estates, ILOperator Safety This power unit can be dangerous! Op4WARNING Fuel Safety Unit / Maintenance SafetyTransporting and Storage Blowernacuum Safety Line Trimmer SafetyEdger Safety Blade rotatesBrushcutter Safety Cultivator SafetyHedge Trimmer Safety Pole Pruner SafetyAssembly Snow Thrower SafetyCarton Contents MentAdjusting the Handle Attaching ShieldStart Lever Knowyour TrimmerPrimer Bulb Before Starting EngineYour Unit Convertible TM FeatureStarting Warm Engine Starting Flooded EngineOperating Instructions Installing Optional AttachMents Operating Position Always USEMowing Howto Stop Your UnitCutting Methods TrimmingAIR Filter Maintenance ScheduleMaintenance Inspect Muffler and Spark Arresting ScreenCarburetor Adjustment Line ReplacementReplace Spark Plug Fuel System Idle Speed AdjustmentSeasonal Storage OtherTroubleshooting Cause RemedyYour Warranty Rights and OB Warranty CommencementEmission Control Warranty MAINTENANCE, Replacement and Repair of Emission RE41 I 61 I 81

358-79104 specifications

The Craftsman 358-79104 is a robust and reliable string trimmer designed to make yard maintenance more efficient and enjoyable. This versatile tool is ideal for both homeowners and landscaping professionals who require a powerful solution for cutting grass, weeds, and underbrush in various terrains.

One of the standout features of the Craftsman 358-79104 is its 25cc, 2-cycle engine. This powerful engine provides ample power to tackle tough trimming tasks with ease. The 2-cycle design ensures high performance while remaining lightweight, making it easy to maneuver around your yard without straining. The engine is also designed for easy starting, reducing the frustration often associated with starting gas-powered equipment.

Another significant feature of the Craftsman 358-79104 is its flexible cutting head design. This trimmer comes with a dual line bump head that allows for a wider cutting swath. The ability to easily feed line by simply bumping the head on the ground is a convenient touch that eliminates the need to stop and rethread the line frequently. This feature not only enhances productivity but also allows for cleaner cuts, promoting healthier grass growth.

The ergonomic design of the Craftsman 358-79104 is built for user comfort. It features an adjustable handle that can be customized to fit the operator's height, reducing fatigue during extended use. The soft-grip handle also provides added comfort and better control, ensuring a precise and comfortable cutting experience.

Another innovative characteristic of this trimmer is its versatile design; it can be easily converted into other tools, such as a brush cutter or edger, by simply attaching compatible accessories. This multi-functional capability greatly enhances the value of the Craftsman 358-79104, making it a worthy investment for anyone looking to maintain their landscape.

In summary, the Craftsman 358-79104 string trimmer delivers a powerful, efficient, and versatile solution for yard maintenance. With its strong 25cc 2-cycle engine, flexible cutting options, ergonomic design, and multi-functionality, this trimmer is a reliable choice for achieving a well-groomed lawn. Whether you're performing routine trimming or tackling overgrown areas, the Craftsman 358-79104 is engineered to handle the job with ease and precision.
Top Page Image Contents