Craftsman 358-79104 operating instructions Attaching Shield, Adjusting the Handle

Page 9

1.Loosen the coupler by turning the knob counterclockwise.

Coupler

Shipph_g protector

Knob

TIGHTEN

2.Remove shipping protector from coupler.

3.Remove the shaft cap from the trimmer attachment (if present).

4.Position locking/release button of attachment into guide recess of coupler.

5.Push the attachment into the cou-

pler until the locking/release button snaps into the primary hole.

6.Before using the unit, tighten the

knob securely by turning clock- wise.

Coupler Primary Hole

Guide Recess

Upper Locking/ Attachment

Release

Shaft

Button

mlWARNING:

Make sure the lock-

ing/release button is locked in the pri- mary hole and the knob is securely tightened before operating the unit. All attachments are designed to be used in the primary hole unless otherwise stated in the applicable attachment op- erator's manual. Using the wrong hole

could lead to serious injury or damage to the unit,

Secoedary Hote

Locking/Release

Button in Primary Hole

For optional attachments, see the AS- SEMBLY section of the applicable at- tachment operator's manual.

ATTACHING SHIELD

,_kWARNING: The shield must be

properly installed. The shield provides partial protection from the risk of thrown objects to the operator and others and is equipped with a line limiter blade which cuts excess line to the proper length. The line limiter blade (on under- side of shield) is sharp and can cut you. For proper orientation of shield, see KNOW YOUR TRIMMER illustration in OP- ERATION section.

1.Remove wing nut from shield.

2.Insert bracket into slot as shown.

3.Pivot shield until bolt passes through hole in bracket.

4.Securely tighten wing nut onto bolt.

ShieldSlot

PIVOT

Bracket

Line Umiter

Blade

Wing

Nut

ADJUSTING THE HANDLE

_, WARNING: When adjusting the assist handle, be sure it remains above

the safety label and below the mark or arrow on the shaft.

1.Loosen wing nut on handle.

2.Rotate the handle on the shaft to an upright position; retighten wing nut.

Page 8 Page 10
Image 9
Page 8 Page 10
Contents 545140962 12/15/06 Operators ManualSears, Roebuck and Co., Hoffman Estates, IL Oneyear Full Warranty on Craftsman GAS WeedwackerThis power unit can be dangerous! Op Operator Safety4WARNING Unit / Maintenance Safety Fuel SafetyTransporting and Storage Edger Safety Line Trimmer SafetyBlowernacuum Safety Blade rotatesCultivator Safety Brushcutter SafetyPole Pruner Safety Hedge Trimmer SafetyCarton Contents Snow Thrower SafetyAssembly MentAttaching Shield Adjusting the HandlePrimer Bulb Knowyour TrimmerStart Lever Before Starting EngineStarting Warm Engine Convertible TM FeatureYour Unit Starting Flooded EngineMents Installing Optional AttachOperating Instructions Operating Position Always USECutting Methods Howto Stop Your UnitMowing TrimmingMaintenance Maintenance ScheduleAIR Filter Inspect Muffler and Spark Arresting ScreenLine Replacement Carburetor AdjustmentReplace Spark Plug Seasonal Storage Idle Speed AdjustmentFuel System OtherCause Remedy TroubleshootingWarranty Commencement Your Warranty Rights and OBMAINTENANCE, Replacement and Repair of Emission RE Emission Control Warranty41 I 61 I 81

358-79104 specifications

The Craftsman 358-79104 is a robust and reliable string trimmer designed to make yard maintenance more efficient and enjoyable. This versatile tool is ideal for both homeowners and landscaping professionals who require a powerful solution for cutting grass, weeds, and underbrush in various terrains.

One of the standout features of the Craftsman 358-79104 is its 25cc, 2-cycle engine. This powerful engine provides ample power to tackle tough trimming tasks with ease. The 2-cycle design ensures high performance while remaining lightweight, making it easy to maneuver around your yard without straining. The engine is also designed for easy starting, reducing the frustration often associated with starting gas-powered equipment.

Another significant feature of the Craftsman 358-79104 is its flexible cutting head design. This trimmer comes with a dual line bump head that allows for a wider cutting swath. The ability to easily feed line by simply bumping the head on the ground is a convenient touch that eliminates the need to stop and rethread the line frequently. This feature not only enhances productivity but also allows for cleaner cuts, promoting healthier grass growth.

The ergonomic design of the Craftsman 358-79104 is built for user comfort. It features an adjustable handle that can be customized to fit the operator's height, reducing fatigue during extended use. The soft-grip handle also provides added comfort and better control, ensuring a precise and comfortable cutting experience.

Another innovative characteristic of this trimmer is its versatile design; it can be easily converted into other tools, such as a brush cutter or edger, by simply attaching compatible accessories. This multi-functional capability greatly enhances the value of the Craftsman 358-79104, making it a worthy investment for anyone looking to maintain their landscape.

In summary, the Craftsman 358-79104 string trimmer delivers a powerful, efficient, and versatile solution for yard maintenance. With its strong 25cc 2-cycle engine, flexible cutting options, ergonomic design, and multi-functionality, this trimmer is a reliable choice for achieving a well-groomed lawn. Whether you're performing routine trimming or tackling overgrown areas, the Craftsman 358-79104 is engineered to handle the job with ease and precision.
Top Page Image Contents