![](/images/new-backgrounds/1111792/11179215x1.webp)
J
EDGING
While edging allow the tip of the line to make contact. Do not force the line.
The edge guard helps protect the unit and keeps the unit from contacting the
ground. Take extra caution while edg- ing as objects can be thrown from the
trimmer line.
"_'%X ,
_'Xx__,
Edging __XXt!//,_..._,_ii
_,.,_ _,,,
._.t"_
SCALPING
MOWING
Your trimmer is ideal for mowing in places conventional lawn mowers cannot reach. In the mowing position, keep the line parallel to the ground. Avoid pressing the head into the ground as this can scalp the ground
and damage the tool.
Mowing//////
_,. | , .... |
_ _<.. |
|
__
SWEEPING'"_[ - ":_"
The fanning action ofthe rotating line
clean up. Keep the line parallel to and canabovebe theusedsurfacesfor quickbeingandswepteasyand
move the tool from side to side.
Sweeping
_.
The scalping technique removes un- wanted vegetation. Hold the bottom of the trimmer head about 3 inches (8 cm) above the ground and at an angle. Al- low the tip of the line to strike the ground around trees, posts, monu-
ments, etc. This technique increases line wear.
Scalping | 1 | //_"} |
CUSTOMER RESPONSIBILITIES
_, WARNING: Disconnect power source before performing maintenance.
CARE | & MAINTENANCE | TASK | WHEN | TO PERFORM | ||
Check | for | loose fasteners | and parts | Before | each | use |
Check | for | damaged or worn parts | Before | each | use | |
Inspect and clean unit and labels | After each use | |||||
|
|
|