Genesis Advanced Technologies G2.2 owner manual Set-up Guide, Planning the Placement

Page 4

absolute fidelity

Set-up Guide

Now that you have your new Genesis 2 loudspeaker system, we realize that you can’t wait to hook it up and start the music! However, this is a big, complex system and we want you to set it up correctly and more importantly, safely. So, please read this set up guide (even if your dealer is setting it up for you!) before you proceed.

Planning the Placement

Before you even have the loudspeakers delivered, it would be a good idea to make a plan of where you will place them. You will not need a huge room, but at an absolute minimum the room needs to be 16 feet (5m) wide where the speakers will be placed. You should have a minimum of at least 6 feet (2m) of space behind the speakers. The listening position should be a minimum of 10 feet (3m) from the front of the midrange ribbon to allow for proper integration of the drivers.

In a typical placement, the midrange/tweeter wings will be placed so that the two columns of tweeters are on the inside, and between six feet to eight feet (2m to 2.6m) apart. The woofer towers are placed behind and outside the wings with the column of woofers about 4 feet

1

Image 4
Contents Absolute fidelity Message from Genesis Iii Planning the Placement Set-up GuideAbsolute fidelity Your backs! during unpacking and setting up UnpackingAssembling the Acoustic Suspension Parts of the amplifier are Servo-Controlled Bass AmplifierAmplifier or SPEAKER. It does not Midrange/Tweeter Connections Control Adjustments Absolute fidelity Servo-Controlled Bass Amplifier Protection Word about FinishAbsolute fidelity Tuning the system Begin with the bass levelImaging and Soundstage Phase Control Further adjustments Defining the Soundstage Make One Change At a TimeAppropriate Mid-bass/Low-bass Balance Absolute fidelity Room Treatment Mastering the Refinements of the system Technology Design PhilosophyGenesis Ribbon Tweeter 48inch midrange ribbon Servo-bass AdvantageWoofer Tower Servo-controlled Amplifier Acoustic Suspension Absolute fidelity Specifications