Genesis Advanced Technologies G2.2 owner manual Specifications

Page 30

absolute fidelity

Specifications
Dimensions:
Mid/Tweeter Wing:	H 75” x W 21” x D 16”
Woofer Tower:	H 75” x W 15” x D 26”
Amplifier (stack):	H 11” x W 17” x D13”
Power Supply:	H 6” x W 10” x D 12”
Weight:	720 lbs (328kg) wing/towers
	90 lbs (41kg) amplifier total
Frequency Response:	16Hz to 36kHz, +/- 2dB
Controls (on amplifier):	Bass volume, phase,
	low-pass, high-pass
Controls (on speaker):	Rear Tweeters (+/- 1 dB)
	Midrange (+/- 0.75 dB)
Input Impedance:	4 ohms (nominal)
	33K ohms (amplifier)
Sensitivity:	91 dB 1 watt 1 meter
Amplifier Power Rating:	4 channels @500 watts each
	Power Supply 1kVA per side
Amplifier Inputs:	1pair XLR (balanced)
Finish:	Acrylic composite

27

Image 30

Contents Absolute fidelity Message from Genesis Iii Planning the Placement Set-up GuideAbsolute fidelity Your backs! during unpacking and setting up UnpackingAssembling the Acoustic Suspension Parts of the amplifier are Servo-Controlled Bass AmplifierAmplifier or SPEAKER. It does not Midrange/Tweeter Connections Control Adjustments Absolute fidelity Servo-Controlled Bass Amplifier Protection Word about FinishAbsolute fidelity Tuning the system Begin with the bass levelImaging and Soundstage Phase Control Further adjustments Make One Change At a Time Defining the SoundstageAppropriate Mid-bass/Low-bass Balance Absolute fidelity Room Treatment Mastering the Refinements of the system Technology Design PhilosophyGenesis Ribbon Tweeter 48inch midrange ribbon Servo-bass AdvantageWoofer Tower Servo-controlled Amplifier Acoustic Suspension Absolute fidelity Specifications