absolute fidelity
retract the spikes first. This will avoid causing damage to the acoustic suspension and to your floor.
5)If you have very light and resonant floorboards, you may need to place a heavy slab of marble, slate, or granite under the loudspeaker to avoid exciting the floor.
The Servo-Controlled Bass Amplifier
The included
The parts of the amplifier are:
Genesis 2
(with optional amplifier suspension for floor placement)
1)The electronic crossover and Control Module with left and right balanced inputs and two control outputs.
2)A pair of Control Interface Cables (CIC): these have
3)A pair of
4)Two
5)Two pairs of
6)A Power Supply for the Amplifier Modules with two Neutrik™
7)A pair of Power Umbilicals with a Neutrik
In the typical configuration, the Control Module, and two Servo- feedback Amplifiers are placed in a stack between the midrange/tweeter wings. The Power Supply is placed behind the stack. The standard cables supplied will work for this configuration:
5