Diameter Line | Black & Decker LST1018 specs

REWINDING SPOOL FROM BULK LINE (USE ONLY .065 IN.
DIAMETER LINE)
Bulk line is also available for purchase from your local retailer.
NOTE: Hand wound spools from bulk line are likely to become
tangled more frequently than Black & Decker factory wound spools.
To install bulk line, follow the steps below.
•	Turn off the trimmer and remove the battery.
•	Press the release tabs on the line spoolcover,as shownin figureQ
•	and remove the coverby pullingit straightoff.
	Remove the spool from the tool and removeand discardall line on the
•	spool.
	Insert one end of the bulk line into
	the hole in the spool shownin
•	figureT about 1/2 in. (12mm).
	Hold the line in the hole and pull
	the rest of the line through the slot
•	in the spool, shown in figure T.
	Snugly and evenlywind the bulk line
	onto the spool in the directionof the
	arrow on spoolin figure T until it is
•	nearly full.
	Insert the line end throughthe eyelet
	in the spoolhub,as shownin
	figure R. Pullthe line throughthe
	holeto maintain tension while

	placingthe spooldown intothe hub
•	with the notched side exposed,as shownin figureS.
	Press the spool down GENTLY and rotateit untilyou feel it drop into
•	place. (When in place,thespoolwillturna fewdegrees leftandrightfreely.)
	Snap the spoolcoverback on, insertthe batteryand turn the tool on.
	In a few seconds or less youʼll hear the nylon line being cut
	automatically to the proper length.

Maintenance
•	Use only mild soap and damp cloth to clean the tool. Never let any
•	liquid get inside the tool; never immerse any part of the tool into a
•	WARNING: Remove or disconnect battery before
	liquid.
	servicing, cleaning or removing material from the gardening appliance.
Accessories
•	Recommended accessories for use with your tool are available from
	your local dealer or authorized service center. If you need assistance
•	regarding accessories, please call: 1-800-544-6986.
•	Use Black & Decker replacement spool No. AF-100.
• Spool cap replacement part no. RC-100-P.
•	Reload nylon line (either bulk or prewrapped replacement spool) as
•	shown in this manual.
•	USE ONLY.065 in. (1.65mm) DIAMETER NYLON MONOFILAMENT
	LINE. Heavier line will overload the motor, cause overheating and will
	impair the automatic feed. This line is available at your local dealer or
•	authorized service center.
•	recommendedWARNINGfor use with:thisThetoolusecouldof anybeaccessoryhazardous.not
•	Do not use fishing line or other lines that are not recommended.

IMPORTANT

Toassure product SAFETY and RELIABILITY,repairs, maintenance and adjustment should be performed by authorized service centers or other qualified service organizations, always using identical replacement parts.

LST1018 specifications

The Black & Decker LST1018 is a versatile and efficient cordless string trimmer and edger, designed to make yard maintenance easy and convenient. One of the standout features of this tool is its lightweight design, which allows for easy maneuverability and reduced user fatigue, making it a perfect choice for both beginners and seasoned gardeners. Weighing in at just under 5 pounds, it is easy to handle and can reach those tricky spots in the yard without straining the user.

This model is powered by an 18-volt Lithium-Ion battery, providing ample energy for extended runtime. The battery is interchangeable with other Black & Decker tools in the 18V family, making it a smart investment for those who want multiple tools that share a power source. The lithium-ion technology also ensures that the battery maintains its charge longer, meaning less downtime while trimming and edging.

The LST1018 features a 12-inch cutting width, which enables users to cover more ground in less time. It features a simple push-button feed for the automatic line advancement, allowing for hassle-free operation. This means the user does not have to stop mid-cutting to adjust the line, thus improving efficiency and saving time. The trimmer also has a flip-up edge guide that makes it easy to transition from trimming to edging, offering clean and precise lines.

Ergonomically designed, the LST1018 incorporates a soft-grip handle making it comfortable for prolonged use. The adjustable height and rotating handle further enhance the user experience by allowing personalization to fit individual needs and preferences. Safety features, including a dual-line system, provide better performance and ensure efficient cutting without excessive wear on the line.

The Black & Decker LST1018 is designed not just for efficiency but also for performance. Its powerful motor is capable of handling thick grasses and weeds, making yard maintenance a breeze, regardless of the terrain. With its combination of power, lightweight design, and the convenience of a cordless tool, the LST1018 stands out as a superb choice for homeowners looking to maintain their lawns with minimal effort. This trimmer is ideal for small to medium-sized yards, providing a perfect balance of power and convenience. Whether you are edging along sidewalks or trimming overgrown sections of your garden, the Black & Decker LST1018 promises to deliver highly satisfying results.

REWINDING SPOOL FROM BULK LINE (USE ONLY .065 IN.

DIAMETER LINE)

figureT about 1/2 in. (12mm).

Hold the line in the hole and pull

in the spool, shown in figure T.

in the spoolhub,as shownin

figure R. Pullthe line throughthe

holeto maintain tension while

placingthe spooldown intothe hub

with the notched side exposed,as shownin figureS.

automatically to the proper length.

Maintenance

Accessories

shown in this manual.

LST1018 specifications