Bolens BL150 manual For QUESTIONS, Call 1o800o520o5520, Before Operating, Symbol Meaning

Page 3

The purpose of safety symbols is to attract your attention to possible dangers, The safety symbols, and their explanations, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger, The instructions or warnings they give are not substitutes for proper accident prevention measures,

SYMBOL MEANING

SAFETY ALERT: Indicates

danger,

warning or caution. Attention is required in order to avoid serious personal injury. May be used in conjunction with other symbols or pbtographs.

NOTE: Advises you of information or instructions vital to the operation or maintenance of the equipment.

Read the Operator's Manual(s) and follow all warnings and safety instructions.

Failure to do so can result in serious injury to the operator and/or bystanders.

FOR QUESTIONS, CALL 1o800o520o5520

SYMBOL MEANING

DANGER: Failure to obey a safety warning will

result in serious injury to yourself or to

others. Always follow the safety precautions to reduce the risk of fire, electric shock and

personal injury,

WARNING: Fa,ureto obey a

safetywarning can

resultininjurytoyourselfand others, Always followthe safetyprecautionsto reduce the riskoffire,electricshock and

personal injury,

, Failure to obey a

• safety warning may

result in property damage or personal injury to yourself or to others, Always follow the safety precautions to reduce the risk of fire, electric shock and personal injury,

,, iMPORTANT SAFETY INSTRUCTIONS o

READ ALL iNSTRUCTiONS

BEFORE OPERATING

WARNING: When using the unit, you must follow the

safety rules, Please read these instructions the unit in order to ensure

operator and any bystanders,

Please keep these instructions for later use,

Read the instructions carefully. Be familiar with the controls and proper use of the unit.

Do not operate this unit when tired, ill or under the influence of alcohol, drugs or medication,

Children under the age of 15 must not use the unit; teens may operate the unit with adult guidance,

Inspect the unit before use, Replace damaged parts, Check for fuel leaks. Make sure all fasteners are in

place and secure, Replace cutting attachment parts that are cracked, chipped or damaged in any way, Make sure the cutting attachment is properly installed and securely fastened, Be sure that the cutting attachment shield is properly attached, and positioned as recommended, Failure to do so can result in personal injury to the operator and bystanders, as well as damage to the unit.

Use only 0,080 inch (2,03 mm) diameter original equipment manufacturer replacement line. Never use metal-reinforced line, wire, chain or rope, These can break off and become dangerous projectiles,

Be aware of risk of injury to the head, hands and feet,

Clear the area to be cut before each use. Remove rocks, broken glass, nails, wire, string and other objects which may be thrown or become entangled in the cutting attachment, Clear the area of children, bystanders and pets; keep them outside a 50-foot

(15 m,) radius, at a minimum, Even then, they are still at risk from thrown objects, Encourage bystanders to wear eye protection, If you are approached, stop the unit immediately,

Squeeze the throttle control and check that it returns automatically to the idle position, Make all adjustments or repairs before using the unit.

This unit was not designed to be used as a brushcutter, Do not attach or operate this unit with any type of brushcutting blade or brushcutting attachment,

SAFETY WARNINGS FOR GAS TRIMMERS

WARNING: Gasoline is highly flammable, and its

vapors can explode if ignited, Take the following precautions:

Store fuel only in containers specifically designed and approved for the storage of such materials,

Always stop the engine and allow it to cool before filling the fuel tank, Never remove the fuel tank cap or add fuei when the engine is hot. Never operate the unit without the fuel cap securely in place, Loosen the fuel tank cap siowiy to relieve any pressure in the tank.

Image 3
Contents BL100 BL150 Cycle Gas Trimmers Product Contains Chemicals ContentsThank YOU Spark Arrestor NoteFor QUESTIONS, Call 1o800o520o5520 Safety Warnings for GAS TrimmersSymbol Meaning Safetywarning canWHmLE OPERATmNG Other Safety WARNmNGSAlwaysuse clean,freshunleadedfuel Primer Bumb AppucatonsInstalling the Cutting Shield Install and Adjust the D-HANDLELiter Using Bmended FuemsUnleaded GAS 2FL OZStarting Position Starting InstructionsHolding the Trimmer Frequency Mnntenance MAmNTENANCESchedule UNE mNSTALLATmONForUsewithSingme AIR Filter Maintenance MNSTALUNG a Prewound ReelRemoving the Air Filter/Muffler Cover Carburetor Adjustment Spark Arrestor MaintenanceReplacing the Spark Plug Transporting CleaningStorage Long Term StorageFillfueHtankwithpropedymixed fueH ReplaceorcleantheairfilterRPM Air-CooHed,2-CycleCalifornia / EPA Emission ControJ Warranty Statement You Manufacturers Limited Warranty for