Cleaning, Long Term Storage, Transporting

CLEANING

WARNING: To serious

personal injury,

always turn your trimmer off and allow it to cool before you clean or service it,

Use a small brush to clean off the outside of the unit. Do not use strong detergents. Household cleaners that contain aromatic oils such as pine and lemon, and solvents such as kerosene, can damage plastic housing or handle. Wipe off any moisture with a soft cloth.

STORAGE

Never store a fueled unit where fumes may reach an open flame or spark.

•Allow the engine to cool before storing.

Store the unit locked up to prevent unauthorized use or damage.

•Store the unit in a dry, well-ventilated area.

•Store the unit out of the reach of children.

LONG TERM STORAGE

If you plan on storing the unit for an extended time, use the following storage procedure:

1.Drain all fuel from the fuel tank into a container with the same 2-cycle fuel mixture. Do not use fuel that has been stored for more than 60 days. Dispose of the old fuel/oil mix in accordance to Federal, State and Local regulations.

2.Start the engine and allow it to run until it stalls. This ensures that all fuel has been drained from the carburetor.

3_ Allow the engine to cool. Remove the spark plug and put 1 oz, (30 mi) of any high quaiity motor oil or

2-cycle oil into the cylinder, Puii the starter rope siowiy to distribute the oii. Reinstaii the spark plug,

NOTE: Remove the spark plug and drain aii of the oii from the cylinder before attempting to start the trimmer after storage.

4_ Thoroughly clean the unit and inspect it for any loose or damaged parts, Repair or replace damaged parts and tighten loose screws, nuts or bolts. The unit is ready for storage.

TRANSPORTING

•Allow the engine to cool before transporting.

•Drain fuel from unit.

Tighten fuel cap before transporting. Secure the unit while transporting.