Snapper 151-3845 Importance of this Manual, Purpose of Sweeper, Terms Used in Manual, Warranty

Page 7

51-3845, 7/047

SAFETY SECTION INTRODUCTION

Importance of this Manual

This operator’s manual should be regarded as part of the sweeper. Suppliers of both new and secondhand sweepers are advised to keep documentation indicat- ing that this manual was provided with the sweeper.

The manual contains information regarding installation, operation and maintenance required for this sweeper model and optional equipment. It also includes detailed parts lists.

__________________________________________

Purpose of Sweeper

This sweeper is designed solely for use in construction cleanup, road maintenance, grounds maintenance, snow removal and similar operations. Use in any other way is considered contrary to the intended use. Compliance with and strict adherence to operation, service and repair conditions, as specified by the manufacturer, are also essential elements of the intended use.

This sweeper should be operated, serviced and repaired only by persons who are familiar with its characteristics and acquainted with relevant safety procedures.

Accident prevention regulations, all other generally recognized safety regulations and all road traffic regulations must be observed at all times.

Any modifications made to this sweeper may relieve the manufacturer of liability for any resulting damage or injury.

__________________________________________

SWEEPSTER, Inc.

2800 North Zeeb Road

Dexter, Michigan 48130

Phone: (734) 996-9116 • (800) 456-7100

FAX: (734) 996-9014

e-mail: sweep@sweepster.com

For help with installation, operation or maintenance procedures, contact our Technical Service Department. Direct product questions and parts orders to our Sales Department.

When ordering parts or accessories, be prepared to give the following information:

Sweeper model, serial number and date of purchase

Prime mover make and model

Part number, description and quantity

__________________________________________

Terms Used in Manual

Right-hand, left-hand, front and rear are determined from the operator’s perspective (either the operator’s seat or standing behind a walk-behind unit), facing forward in the normal operating position.

Prime mover refers to the tractor, truck, loader or tow vehicle that a sweeper is mounted on or towed by.

__________________________________________

Optional Equipment

Installation instructions for optional equipment, if applicable, appear with parts lists in the back of the manual.

__________________________________________

Safety Alert Symbol

This safety alert symbol indicates important safety messages in this manual. When you see

this symbol, be alert to the possibility of injury. Carefully read the message that follows and inform other operators.

__________________________________________

Contacting SWEEPSTER

If you have any questions about information in this manual or need to order parts, please call, write, FAX or e-mail SWEEPSTER.

Specifications & Features

Due to continuous product improvement, specifica- tions and features may change without notice.

__________________________________________

Warranty

To validate the warranty for this unit, fill out the war- ranty card or warranty pages located at the back of this manual. Then, send this information to

SWEEPSTER.

__________________________________________

Image 7
Contents M26 Series 51-3845, 7/04 Table of Contents 51-3845, 7/04 Operation Maintenance Serial & Part Numbers Importance of this Manual Safety Alert SymbolSpecifications & Features WarrantyHazard Definitions Read this ManualOperation Service & Repair Locations Care of Safety SignsRepresentations of Labels Pinch Point Install Front Hitch Initial InstallationInstall Long Drive Shaft Brush head not shown Operational Check Sweeper Control Operating SweeperSnow Removal Leaf Raking Lawn ThatchingGeneral Sweeping If Brush Wears Unevenly If Material Piles in Front of SweeperIf Driveline Wears Quickly Sweeper & Hitch Removal Tractor Air Filter LubricationBrush Replacement Daily Maintenance ChecksOn next Maintenance Section Brushreplacement Replacing Shear Bolt Adjusting Drive Chain IdlerAdjusting Brush Contact Area Safety Labels51-3845, 7/04 Parts Part Qty Description Brush Head Parts Section Hitch Assembly #1709659 QTY #1709660 QTY #1960587 QTY #1924366 QTY Item Part Qty Description Appendix Hardware Identification ThankyouforpurchasingaSweepsterproduct.Warrantyprotection One year