Midland Radio 74-200 manual

Page 13

channel button corresponding to the frequency of your NOAA weather broadcast station. If you find there is more than one broadcast station in your area, be sure that station will broadcast your county code. To confirm this listen to the broadcast associated with the weekly test. Durring the broadcast they will give a list of counties covered by the transmitter.

Channel

Frequency

 

(MHz)

1

162.400

2

162.425

3

162.450

4

162.475

5

162.500

6

162.525

7

162.550

When you have selected the correct channel press and release the YES button to continue programming or press and release the program button to end programming.

NOTE: If no program keys are pressed for about 30 seconds the 74-200 will go back to alert mode. To continue after the 74-200 goes back to alert mode, follow the previous step above.

13

Image 13
Contents Model Product Information FeaturesPage Controls Page NWR-SAME Emergency Power Antenna Initial SetupWhat is a Fips Code Acquiring Fips codes for Your Area Alarm Setting the Clock, Alarm and CalendarClock DateAdjusting the Weather Frequency Page Changing the Alert Pattern Reviewing stored Fips codes ALL County Code Using the Alert FunctionNWR Alert Descriptions Thunders Special When a Test or Demo Alert Occurs Reset Button Problem Suggestions TroubleshootingBack Light of the Display Button press BeepsAlert Maintenance Volt Operation General SpecificationsReceiver EXT. Alert OutputService ONE Year Limited Warranty Mail mail@midlandradio.com