Midland Radio 74-200 manual ALL County Code, Using the Alert Function

to review all memory locations you desire. All empty memory locations will be “000000”. When finished reviewing the “FIPS” codes press and release the program button.

ALL County Code

To cause the 74-200 to receive all SAME messages without regard to area, enter the code “999999. Be sure there are no other codes programmed in any other memory location.

If you have not selected a weather channel frequency for your local area follow the instructions in “Adjusting Weather Frequency”. To listen to the weather broadcast, press and release the “WEATHER” bar on the front of the 74-200. Adjust the volume for your best listening level. Press and release the “WEATHER” bar again to mute the voice broadcast.

USING THE ALERT FUNCTION:

Setting the Alert Volume

To set the alert volume, find the alert tone volume control on the bottom of the radio. Use a coin or small screwdriver to turn the control clockwise for more volume or counter-clockwise for less volume. We recommend setting the control to maximum volume when first setting up the radio then decreasing the volume if necessary.

Connecting the External Alert Output to an External Device

You may need to turn on or off another device when an alert is

16