Adjusting the Weather Frequency

1.Press and release the “DISP. MODE” button until “AL Time” is displayed in the upper left corner of the display.

2.Press and release the set button. The display will begin flashing. Press and release the “Hour / Date” button to change the Hour. Press and release the “Min /Month” button to change the Minute. Press the “Set” button to store your settings

3.To activate the alarm, set the switch on the right side of the 74-200 marked “ON OFF ALARM” to the ON position.

The “SNOOZE” button on the top of the 74-200 is for advancing the alarm time by 9 minutes each time the alarm sounds. To switch OFF the alarm, move “ON/ OFF/ ALARM” switch to the “OFF” position.

We have not adjusted the weather frequency for your local area. Look up your city in the supplied Weather Service directory and note the freque ncy. Find the channel number that corresponds to your frequency. To test for weather signals, switch the 74-200 on with the switch marked “Max / Volume / OFF”. Press and release the WEATHER bar on the front of your 74-200. This will temporarily switch the 74-200 from standby to listen for Weather Transmissions.

To set the channel. Press and release the “DISP. MODE” button until “WEATHER ALERT” shows on the display. Open the access door on the top of the unit to show the programming buttons. Press and release the PROGRAM button then the