Midland Radio 74-200 manual Reviewing stored Fips codes

Page 15

NOTE: The 74-200 has enough memory to store 15 “FIPS” codes.

The next display after VOICE/ALERT will display six numbers. These numbers will determine the areas or counties that your 74- 200 will be set to respond to SAME messages. See “Acquiring FIPS Codes for Your Area” for how and where to find the codes for your area.

To change the first code displayed,(this will usually be “999999” this provides all county alert in your area) press and release the YES button to overwrite the code displayed or no to keep the code. If you pressed YES the display will now show “_ _ _ _ _ ”. Press and release the number buttons to enter the FIPS code you want. When the display shows the correct number press and release the YES button. This accepts the code you entered and will go to the next code slot. If you make a mistake while entering the code, press and release the NO button to clear the digits then reenter the code. After you press and release the YES button, the display will show “000000” if no other codes are programmed. If there is a code in the next slot, decide if you want to keep the code or overwrite the code (see above). If you press YES the display will go to “_ _ _ _ _ _ “ asking for another code. Proceed as you did for the first code. When you have entered all the desired codes, press and release the “Program” button to store your settings.

Reviewing stored “FIPS” codes

Enter the program mode as described earlier. When the “FIPS” codes are displayed, press and release the “NO” button repeatedly

15

Image 15
Contents Model Product Information FeaturesPage Controls Page NWR-SAME Emergency Power Antenna Initial SetupWhat is a Fips Code Acquiring Fips codes for Your Area Date Setting the Clock, Alarm and CalendarAlarm ClockAdjusting the Weather Frequency Page Changing the Alert Pattern Reviewing stored Fips codes ALL County Code Using the Alert FunctionNWR Alert Descriptions Thunders Special When a Test or Demo Alert Occurs Reset Button Button press Beeps TroubleshootingProblem Suggestions Back Light of the DisplayAlert Maintenance Volt Operation EXT. Alert Output SpecificationsGeneral ReceiverService ONE Year Limited Warranty Mail mail@midlandradio.com