Snapper R1962519B important safety instructions Discharge Deflector Installation

Page 10

Section 2 - OPERATING INSTRUCTIONS

WARNING

DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool. Wear heavy leather gloves when handling or working around cutting blades. Blades are extremely sharp and can cause severe injury.

WARNING

DO NOT operate mower without entire Grass Catcher, Discharge Deflector or Recycling Cover in place.

2.8DISCHARGE DEFLECTOR (INSTALLATION)

1.Remove the recycling cover. Loosen and remove the two knobs securing the cover to the deck and remove the cover from the two bolts. The two bolts remain in the deck. See Figure 2.9.

2.Remove nut and bolt located below the front of the discharge opening. See Figure 2.9.

3.Place discharge deflector over two bolts at top of discharge opening and secure to deck using the two knobs removed in Step 1. Tighten knobs securely.

4.Using hardware removed in Step 2, insert bolt with head on inside of deck into bottom rear hole of discharge deflector. Secure to deck with nut. See Figure 2.10.

INSTALL KNOBS

INSTALL DISCHARGE

DEFLECTOR OVER

DECK OPENING

FIGURE 2.10

TWO BOLTS

REMAIN IN

DECKREMOVE THIS NUT & BOLT

FIGURE 2.9

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Steel Deck Walk Mowers Series Model Number ExplanationPreparation Protection for ChildrenSlope Operation Safe Handling of GasolineMaintenance and Storage OperationUsage Statement Table of Contents Introduction FamiliarizationPrimer Bulb NomenclaturePRE-START Check List Operating InstructionsStarting & Operation 2.2.1. Engine & Blade Handle Height Adjustment StoppingRecycling Cover REMOVAL/INSTALLATION Cutting Height AdjustmentRecycling Operation Discharge Deflector Installation Service After First 5 Hours 3.2.1. Change Engine OIL MaintenanceCheck Mower Blade Service Annually Storage ProcedureMower Blade Replacement Standard Blade Wear Limit Adjustments & RepairBlade Sharpening Problem Probable Cause Corrective ActionMAINTENANCE/REPLACEMENT Parts Service Performed EachUSE HRS Season Year Limited Warranty Disclaimer of WarrantyPrimary Maintenance Primary Maintenance Primary Maintenance Primary Maintenance Snapper Product Registration Form Page Page Steel Deck Walk Behind Mowers Series

R1962519B specifications

The Snapper R1962519B is a powerful and efficient lawn mower designed for homeowners who value a well-manicured lawn. With its robust engineering and user-friendly features, this mower stands out in the competitive landscaping equipment market.

One of the key features of the Snapper R1962519B is its 19-inch cutting deck, which allows for a wider cutting path compared to many traditional mowers. This feature enables quicker mowing, making it an ideal choice for those with moderate to larger-sized lawns. The mower is equipped with a 190cc Briggs & Stratton engine, known for its reliability and performance. This engine provides ample power to tackle thick grass and varying terrain types with ease.

The R1962519B utilizes a 3-in-1 cutting system, which means it can mulch, bag, or side discharge grass clippings based on user preference. This versatility not only enhances the mower's efficiency but also allows homeowners to choose the best method for lawn maintenance depending on the season or specific yard conditions.

Another innovative feature of this model is its variable speed self-propel system. This technology allows users to adjust their mowing speed, providing greater control and comfort while mowing. Whether you need to navigate around garden beds or speed through open areas, the Snapper R1962519B adapts to your pace.

Comfort is further enhanced by the adjustable ergonomic handle, which can be customized to suit the user's height and posture. This thoughtful design reduces strain during operation, making it easier to handle and maneuver the mower, particularly on longer mowing sessions.

In terms of construction, the Snapper R1962519B is built with durable materials that withstand rugged outdoor use. The deck's design also promotes optimal airflow, resulting in improved cutting performance and a cleaner finish.

Maintenance is simplified through features such as a quick-change oil system and easy-access air filter. This ensures that users can perform necessary upkeep without needing specialized tools or knowledge.

In summary, the Snapper R1962519B combines practical features, cutting-edge technologies, and thoughtful design to provide an excellent mowing experience. With its powerful engine, versatile cutting options, and user-friendly controls, it is a fantastic choice for anyone looking to maintain a beautiful lawn with minimal effort.
Top Page Image Contents