Snapper R1962519B important safety instructions Problem Probable Cause, Corrective Action

Page 14

TROUBLESHOOTING

PROBLEM

 

PROBABLE CAUSE

Engine Will Not Start

1.

Fuel tank empty.

Using Recoil Starter

2.

Engine needs choking or priming.

 

 

 

 

3.

Spark plug wire disconnected.

 

4.

Spark plug faulty.

Engine Stalls or Stops

1.

Blade control is released or is not being held securely

After Running

 

against handle.

2.Fuel tank empty.

3.Engine air pre-cleaner and or air cleaner dirty.

4.Spark plug defective or gap set improperly.

5.Water, debris or stale fuel in fuel system. Engine Loses Power 1. Engine air pre-cleaner or air cleaner dirty

2.Spark plug faulty.

3.Water, debris or stale fuel in fuel system.

Excessive Vibration 1. Damaged, out of balance or bent mower blade.

2.Loose blade components.

3.Loose or missing air lift (if equipped).

Cutting Grass 1. Cutting height too low or high.

Improperly

2. Engine speed too slow.

3.Forward ground speed too fast.

4.Terraced cut, side to side.

5.Excessive deck pitch, front to rear.

6.Cutting blade dull or damaged.

Poor Grass Discharge 1. Engine speed too slow.

 

2.

Grass is wet.

 

3.

Excessively worn or damaged blade.

 

4.

Build up of grass clippings and debris under deck.

 

5.

Improper blade installed on deck.

 

6.

Blade installed improperly on deck.

Oil Leaking

1. Leaking engine case.

CORRECTIVE ACTION

1.Fill fuel tank with fresh fuel.

2.Choke/Prime. Check Engine Manual for instruction.

3.Place spark plug wire onto spark plug.

4.Replace with new spark plug.

1.Blade control should be held securely against handle at all times during operation of mower.

2.Fill with fuel to proper level.

3.Clean free of all debris.

4.Service spark plug.

5.Drain and clean fuel system.

1.Clean or replace filters.

2.Service spark plug.

3.Drain and clean fuel system.

1.Service mower blade.

2.Service and tighten loose parts.

3.Replace air lifts. Tighten to proper torque.

1.Adjust cutting height.

2.Contact authorized SNAPPER Dealer.

3.Walk at slower pace.

4.Adjust height of cut with height adjust bushings.

5.Adjust height of cut with height adjust bushings.

6.Sharpen cutting edges or replace blade.

1.Contact authorized SNAPPER Dealer.

2.Mow when grass is dry.

3.Service mower blade.

4.Clean deck.

5.Install proper SNAPPER blade.

6.Install blade properly.

1.Contact authorized SNAPPER dealer.

2.Check and tighten drain plug.

3.Make sure dipstick or oil filler cap is securely in place.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Steel Deck Walk Mowers Series Model Number ExplanationPreparation Protection for ChildrenSlope Operation Safe Handling of GasolineMaintenance and Storage OperationUsage Statement Table of Contents Introduction FamiliarizationPrimer Bulb NomenclatureStarting & Operation 2.2.1. Engine & Blade Operating InstructionsPRE-START Check List Handle Height Adjustment StoppingRecycling Operation Cutting Height AdjustmentRecycling Cover REMOVAL/INSTALLATION Discharge Deflector Installation Check Mower Blade MaintenanceService After First 5 Hours 3.2.1. Change Engine OIL Service Annually Storage ProcedureBlade Sharpening Adjustments & RepairMower Blade Replacement Standard Blade Wear Limit Problem Probable Cause Corrective ActionUSE HRS Season Service Performed EachMAINTENANCE/REPLACEMENT Parts Year Limited Warranty Disclaimer of WarrantyPrimary Maintenance Primary Maintenance Primary Maintenance Primary Maintenance Snapper Product Registration Form Page Page Steel Deck Walk Behind Mowers Series

R1962519B specifications

The Snapper R1962519B is a powerful and efficient lawn mower designed for homeowners who value a well-manicured lawn. With its robust engineering and user-friendly features, this mower stands out in the competitive landscaping equipment market.

One of the key features of the Snapper R1962519B is its 19-inch cutting deck, which allows for a wider cutting path compared to many traditional mowers. This feature enables quicker mowing, making it an ideal choice for those with moderate to larger-sized lawns. The mower is equipped with a 190cc Briggs & Stratton engine, known for its reliability and performance. This engine provides ample power to tackle thick grass and varying terrain types with ease.

The R1962519B utilizes a 3-in-1 cutting system, which means it can mulch, bag, or side discharge grass clippings based on user preference. This versatility not only enhances the mower's efficiency but also allows homeowners to choose the best method for lawn maintenance depending on the season or specific yard conditions.

Another innovative feature of this model is its variable speed self-propel system. This technology allows users to adjust their mowing speed, providing greater control and comfort while mowing. Whether you need to navigate around garden beds or speed through open areas, the Snapper R1962519B adapts to your pace.

Comfort is further enhanced by the adjustable ergonomic handle, which can be customized to suit the user's height and posture. This thoughtful design reduces strain during operation, making it easier to handle and maneuver the mower, particularly on longer mowing sessions.

In terms of construction, the Snapper R1962519B is built with durable materials that withstand rugged outdoor use. The deck's design also promotes optimal airflow, resulting in improved cutting performance and a cleaner finish.

Maintenance is simplified through features such as a quick-change oil system and easy-access air filter. This ensures that users can perform necessary upkeep without needing specialized tools or knowledge.

In summary, the Snapper R1962519B combines practical features, cutting-edge technologies, and thoughtful design to provide an excellent mowing experience. With its powerful engine, versatile cutting options, and user-friendly controls, it is a fantastic choice for anyone looking to maintain a beautiful lawn with minimal effort.
Top Page Image Contents