Mower Deck Removal & Installation

WARNING

Engage parking brake, disengage PTO, stop engine and remove key before attempting to install or remove the mower.

Removing the Mower Deck

1.Park tractor on a hard, level surface such as a concrete floor. Turn off PTO switch and engine, remove the key and apply parking brake.

2.Place wood blocks under the mower deck. Place the attachment lift in the lowest position.

CAUTION

Stored energy device. 44” & 50” mowers have spring lift assist. Lift lever must be in lowest cutting position and mower on support blocks to avoid injury when removing or installing mower mounting hardware. Return lift lever to highest position after hardware has been disconnected.

3.Move idler arm (A, Figure 5) to relieve belt tension. Remove belt from PTO pulley (B).

4.Remove hair pin (D, Figure 4) and washer (C). Disconnect the mower lift plates (A) from the tractor lift arms (B). Re-install washers (C) and hair pins (D) to prevent loss.

5.Return lift lever to highest position.

CAUTION

The muffler and surrounding areas may be hot.

6.Turn wheels straight ahead. Support the mower hanger (C). Remove safety clip (A, Figure 6) and rod

(B). Lower the mower hanger (C).

7.Turn wheels fully left, and slide mower deck out right side of tractor.

Installing the Mower Deck

1.Park tractor, shut off PTO and engine, remove the key and apply parking brake. Turn the wheels fully to the left.

2.Place the mower lift lever (A, Figures 7) in the lowest position. Slide mower deck under right side of tractor so that mower hitch is aligned with the front tractor hitch.

3.Turn wheels straight. Lift the mower hanger (C, Figure 6). Insert rod (B) through mower hanger (C) and tractor brackets (D). Secure with safety clip (A).

4.Re-install hair pins (D, Figure 4) and washers (C) into the mower lift plates (A) and the tractor lift arms (B).

Operating the Tractor

Figure 4. Lift Arms

(Viewed from underneath right side of tractor)

A.Mower Lift Plate

B.Tractor Lift Arm

C.Washer

D.Hair Pin

Figure 5. Removing & Installing Belt

A.Idler Arm

B.PTO Pulley

B	D
	D
D
	C
A

Figure 6. Mower Hitch

A.Safety Clip

B.Rod

C.Mower Hanger

D.Tractor Brackets

5.Move idler arm (A, Figure 5) to relieve belt tension. Install belt onto the PTO pulley (B).

LT-200 Series specifications

The Snapper LT-200 Series is an advanced riding mower designed to deliver an exceptional mowing experience, combining user-friendly features with powerful performance. This series is specifically engineered for homeowners who require both efficiency and reliability in their lawn care routine.

One of the primary features of the Snapper LT-200 Series is its powerful engine. Equipped with a robust Briggs & Stratton engine, the LT-200 is designed to provide significant horsepower, ensuring that it can handle various grass types and challenging terrains with ease. The engine is also designed for fuel efficiency, which means users can maintain their lawns without excessive fuel consumption.

A standout feature of the LT-200 Series is its cutting system. The mower features a 42-inch cutting deck, which allows for wider mowing coverage in fewer passes, saving both time and energy. The deck is adjustable, enabling users to choose from multiple cutting heights, ensuring that they can achieve the desired lawn length. The mulching capability is another highlight, allowing users to finely chop grass clippings to distribute nutrients back into the soil, promoting a healthier lawn.

Comfort is a significant focus in the Snapper LT-200 design. The mower features a plush, high-back seat with armrests to provide support during extended mowing sessions. The easy-to-use control panel is intuitively designed, giving users quick access to throttle, drive engagement, and mowing functions, simplifying the mowing process regardless of the user’s experience level.

In terms of maneuverability, the LT-200 Series boasts a tight turning radius, allowing it to navigate around trees, flowerbeds, and other obstacles with ease. The six-speed transmission provides smooth shifts that enable users to tailor their speed according to the terrain, whether it's flat or hilly.

Additionally, the Snapper LT-200 incorporates advanced technologies like the SureStart engine technology, ensuring reliable startup on the first try, and a durable steel frame construction, contributing to the mower's longevity and robustness. With easy access to maintenance points, regular upkeep becomes a hassle-free task.

Overall, the Snapper LT-200 Series stands out as a comprehensive solution for homeowners looking for a reliable riding mower that combines power, comfort, and advanced features, making lawn care an enjoyable experience rather than a chore.