Lubricate Rear Axle Shafts

Regular Maintenance

Figure 16. Lubricate Deck Linkage (38” shown)

Figure 15. Arbor Lubrication Points

Service Interval: Yearly

We recommend removing the rear wheel hubs and lubricating the axle shafts yearly. This prevents the wheel hubs from seizing onto the axle shaft and makes future service easier.

1.Turn off the ignition, turn off the PTO, engage the parking brake, and block the front tires.

2.Using a jack or chain hoist positioned at the center of the rear frame, carefully jack the unit up until the rear tires are approximately 1" - 2" (2.5-5cm) off the ground.

NOTE: For overall unit stability during service, do not jack rear end higher than required for wheel removal.

3.Support the rear of the unit on jackstands positioned under the rear frame.

NOTE: Your axle assembly may differ slightly from the

assembly pictured: the quantity of washers is adjusted to allow a small amount of axle end-play.

4.Remove the hardware retaining the wheel assembly to the axle and lubricate the axle shaft using anti- seize compound or lithium grease.

5.Reinstall the components in reverse order of disassembly and lower the unit. Be sure the key (A, Figure 17) is in place in the axle keyway.

H	A
	B	C
		H
		D
		E
		G
		F

Figure 17. Rear Axle Hardware

A.Key

B.Spacer

C.Wheel & Hub

D.Special Washer

E.Small Washer

F.E-Clip

G.Axle Cap

H.Large Washer

LT-200 Series specifications

The Snapper LT-200 Series is an advanced riding mower designed to deliver an exceptional mowing experience, combining user-friendly features with powerful performance. This series is specifically engineered for homeowners who require both efficiency and reliability in their lawn care routine.

One of the primary features of the Snapper LT-200 Series is its powerful engine. Equipped with a robust Briggs & Stratton engine, the LT-200 is designed to provide significant horsepower, ensuring that it can handle various grass types and challenging terrains with ease. The engine is also designed for fuel efficiency, which means users can maintain their lawns without excessive fuel consumption.

A standout feature of the LT-200 Series is its cutting system. The mower features a 42-inch cutting deck, which allows for wider mowing coverage in fewer passes, saving both time and energy. The deck is adjustable, enabling users to choose from multiple cutting heights, ensuring that they can achieve the desired lawn length. The mulching capability is another highlight, allowing users to finely chop grass clippings to distribute nutrients back into the soil, promoting a healthier lawn.

Comfort is a significant focus in the Snapper LT-200 design. The mower features a plush, high-back seat with armrests to provide support during extended mowing sessions. The easy-to-use control panel is intuitively designed, giving users quick access to throttle, drive engagement, and mowing functions, simplifying the mowing process regardless of the user’s experience level.

In terms of maneuverability, the LT-200 Series boasts a tight turning radius, allowing it to navigate around trees, flowerbeds, and other obstacles with ease. The six-speed transmission provides smooth shifts that enable users to tailor their speed according to the terrain, whether it's flat or hilly.

Additionally, the Snapper LT-200 incorporates advanced technologies like the SureStart engine technology, ensuring reliable startup on the first try, and a durable steel frame construction, contributing to the mower's longevity and robustness. With easy access to maintenance points, regular upkeep becomes a hassle-free task.

Overall, the Snapper LT-200 Series stands out as a comprehensive solution for homeowners looking for a reliable riding mower that combines power, comfort, and advanced features, making lawn care an enjoyable experience rather than a chore.