Snapper EYZ16335BVE important safety instructions Service Annually, Storage OUT of Season

Page 16

Section 3 - MAINTENANCE

WARNING

DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. Stop engine. Stop blade. Engage parking brake. Remove key. Remove spark plug wire from spark plug and secure away from plug. Engine and components are HOT. Avoid serious burns, allow all parts to cool before working on machine. Fuel Filler Cap and Vent must be closed securely to prevent fuel spillage.

3.4 SERVICE - ANNUALLY

Perform all maintenance as described in the maintenance schedule.

3.4.1. Engine

Service engine according to engine owner’s manual.

3.4.2. Air Filter

Refer to engine owner’s manual for service instructions.

3.4.3. Oil Filter

Refer to engine owner’s manual for service instructions.

3.4.4. Engine Oil

Refer to engine owner’s manual for service instructions.

3.4.5. Transaxle

IMPORTANT: DO NOT try to open reservoir cap at any time. The transaxle is maintenance free. The transaxle does not require any fluid or any service. If there is any problem: leakage, or malfunction, return the SCRAMBLER immediately to the nearest authorized Snapper dealer for service.

3.4.6. Fuel Filter

Service fuel filter as instructed below. Close fuel valve in fuel line. Run engine until engine runs out of fuel. Turn key to “OFF” position. Engine MUST be stopped and MUST be cold before removing filter. Perform filter change only when fuel line is empty.

1.Remove hose clamps from fuel filter.

2.Remove fuel lines from filter. Discard filter.

3.Install new fuel filter. Reinstall hose clamps. See Figure 3.10.

NEW FUEL FILTER

PART NO. 1-4359

HOSE CLAMPS

FIGURE 3.10

3.5 STORAGE (OUT OF SEASON)

If desired, the SCRAMBLER can be stored on the rear bumper. Perform the following procedures to insure the SCRAMBLER will operate properly when taken out of storage.

1.Thoroughly clean the SCRAMBLER by removing all grass clippings and debris.

2.Perform maintenance and lubrication as described in the previous sections.

3.Drain fuel from fuel tank into an approved container outdoors away from all sources of ignition.

4.Start engine and allow it to run until engine runs out of fuel. This allows the carburetor and fuel system to remain clean during storage.

5.Remove battery. Refer to Section “BATTERY REMOVAL AND STORAGE”.

6.Close vent on fuel filler cap and fuel valve in fuel line. Remove key.

7.Carefully stand SCRAMBLER on rear bumper in desired location for storage.

16

Image 16
Contents European Scrambler Hydro Drive Series Model Number ExplanationProtection for Children Protection Against Tipovers PreparationSafe Handling of Gasoline OperationMaintenance Table of Contents Introduction FamiliarizationNomenclature Familiarization Decals / Symbols Operating Instructions PRE-START Check ListStarting & Operation Engine Electric Start Mower Blade StoppingEngine Parking BrakeCutting Height Adjustment Engine Must not Start ifEngine should Start if Engine Must Begin to Stop ifMaintenance Service After First 5 HoursChange Engine OIL Check Mower BladeChecking Mower Belt Tension Check EngineEngine Cooling System Engine Oil Oil Filter Fuel Filter Air FilterMower Components Underside View of 33 DeckFront Caster Wheel Pivot Shaft Scrambler Lubrication 1. Front Wheel BearingsParking Brake Pivot Bushings Service Annually Storage OUT of SeasonAdjustments & Repair Do not attempt any adjustments, maintenanceService or repairs with the engine running. Stop Neutral PositionEngine Adjustments & Repair Mower Drive Belt AdjustmentBelt Replacement Belt ReplacementsBlade Brake Adjustment Adjusting Mower BladeDown Eccentric Loosen Shoulder Bolt Wheel Brake Adjustment Mower Blade Replacement 4.4.1. Blade Wear LimitsMower Deck Timing ROD Blade SharpeningMower Blade Replacement 4.4.3. Blade Replacement Battery Battery RemovalBattery Installation 1. Slide battery into battery cradle Battery ServiceBattery Testing NEW Battery Preparation 1. Remove battery from cartonTrouble Shooting on Next Problem Probable CauseCorrective Action Problem Probable Cause Corrective Action Excessive VibrationService Performed Each MAINTENANCE/REPLACEMENT Parts100 USE HRS SeasonYear Limited Warranty Disclaimer of WarrantyPrimary Maintenance Primary Maintenance Primary Maintenance Primary Maintenance European Scrambler Hydro Drive Series

EYZ16335BVE specifications

The Snapper EYZ16335BVE is a versatile and powerful lawn mower designed for both residential and commercial use. Known for its exceptional cutting ability and user-friendly features, this model stands out in the competitive outdoor power equipment market.

At the heart of the Snapper EYZ16335BVE is a robust 163cc engine that delivers reliable power and efficient operation. The engine is designed to provide ample torque, ensuring that the mower can handle tough turf as well as fine lawns with ease. The self-propelled feature enhances maneuverability, allowing users to navigate through various terrains without putting extra strain on themselves.

One of the standout characteristics of the EYZ16335BVE is its 21-inch steel mowing deck, which provides superior durability and a wide cutting path for faster mowing. This model offers adjustable cutting heights, allowing users to choose between different grass lengths ranging from 1 to 4 inches. The ability to customize the cut makes it suitable for diverse grass types and can contribute to healthier lawn growth.

The Snapper EYZ16335BVE is equipped with a reliable 3-in-1 cutting system, offering options for mulching, bagging, or side discharge. This versatility allows users to manage lawn clippings efficiently based on their preferences or lawn care requirements. The mulching feature returns finely chopped clippings to the lawn, providing natural fertilization.

Ergonomically designed, this lawn mower includes a padded handle for comfort during operation. Its lightweight construction ensures that it is easy to maneuver and transport, reducing user fatigue during extended mowing sessions. The foldable handle is an additional convenience, making storage simple and efficient.

In terms of maintenance, the Snapper EYZ16335BVE is designed for ease of service. Accessible air filters and an easy-start engine design simplify routine maintenance tasks, ensuring that the mower operates at peak performance year-round.

Overall, the Snapper EYZ16335BVE embodies innovation and practicality, making it a reliable choice for homeowners and landscaping professionals. With its exceptional features, solid construction, and advanced technologies, it provides an efficient mowing solution that meets the demands of various lawn care needs. Whether tackling vast lawns or navigating smaller residential yards, the Snapper EYZ16335BVE consistently delivers results that exceed expectations.