Snapper EYZ16335BVE important safety instructions Starting & Operation Engine Electric Start

Page 9

Section 2 - OPERATING INSTRUCTIONS

IMPORTANT: This SCRAMBLER is equipped with hydrostatic drive. The forward, rearward and steering movement of the machine is controlled by a joystick lever. Joystick operations should be performed only from the operator’s position in the seat. A small movement of the joystick can cause the machine to move instantly. Move joystick very carefully and slowly.

1.Always move the joystick to the center position to “STOP” machine. IMPORTANT: To stop machine always return the joystick with hand assistance to the neutral position. Always engage parking brake when leaving operator’s seat.

2.Move the joystick forward to propel the machine forward.

3.Move the joystick rearward to propel the machine backward.

4.Move the joystick to the right to rotate the front of the machine in circular motion to the right, as in turning around to go in a different direction.

5.Move the joystick to the left to rotate the front of the machine in circular motion to the left, as in turning around to go in a different direction.

START

POSITION

RUN

POSITION

STOP

POSITION

JOYSTICK IS IN

NEUTRAL POSITION

TURN KEY

TO START

POSITION

FIGURE 2.5

2.2STARTING & OPERATION

2.2.1. ENGINE (ELECTRIC START)

IMPORTANT: When the ignition key is turned to “START”, the engine will not turn over and will not start unless the Parking Brake is engaged and the Blade Switch is in the “Off” position. The operator should be in the seat. Start engine as follows:

1.Move joystick lever to (N) Neutral position. See Figure 2.5.

2.Make certain the blade switch is in the “Off” position. See Figure 2.6.

3.Make certain the parking brake is engaged. See Figure 2.5.

4.Open vent on fuel cap by turning counterclockwise. Open fuel valve located in fuel line. IMPORTANT: Failure to open vent and fuel valve will cause engine to stall or not to start.

5.Move choke control forward to the choke “ON” position. See Figure 2.6.

6.Move engine speed control forward to the “Fast” (Rabbit) position. See Figure 2.6.

7.Turn key to the “START” position until engine starts. See Figure 2.5. NOTE: If after 5 seconds of cranking the engine and it does not start, release the key. Attempt starting again after waiting for approximately 20 seconds.

8.After engine starts, move choke control rearward to the “OFF” position. Move engine speed control to the desired speed position. Allow a brief warm-up until engine runs smooth.

 

MOVE ENGINE

PARKING BRAKE

SPEED CONTROL

ENGAGED

FORWARD TO FAST

 

(RABBIT) POSITION

MOVE CHOKE CONTROL

FORWARD TO “ON”

FIGURE 2.6

WARNING

DO NOT leave machine with engine running. STOP engine. STOP blades. Engage park brake. Remove key. DO NOT park machine on slopes.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Model Number Explanation European Scrambler Hydro Drive SeriesPreparation Protection for Children Protection Against TipoversOperation Safe Handling of GasolineMaintenance Table of Contents Familiarization IntroductionNomenclature Familiarization Decals / Symbols PRE-START Check List Operating InstructionsStarting & Operation Engine Electric Start Stopping Mower BladeEngine Parking BrakeEngine Must not Start if Cutting Height AdjustmentEngine should Start if Engine Must Begin to Stop ifService After First 5 Hours MaintenanceChange Engine OIL Check Mower BladeCheck Engine Checking Mower Belt TensionEngine Cooling System Engine Oil Oil Filter Fuel Filter Air FilterUnderside View of 33 Deck Mower ComponentsScrambler Lubrication 1. Front Wheel Bearings Front Caster Wheel Pivot ShaftParking Brake Pivot Bushings Storage OUT of Season Service AnnuallyDo not attempt any adjustments, maintenance Adjustments & RepairService or repairs with the engine running. Stop Neutral PositionMower Drive Belt Adjustment Engine Adjustments & RepairBelt Replacement Belt ReplacementsAdjusting Mower Blade Blade Brake AdjustmentDown Eccentric Loosen Shoulder Bolt Mower Blade Replacement 4.4.1. Blade Wear Limits Wheel Brake AdjustmentMower Deck Timing ROD Blade SharpeningBattery Battery Removal Mower Blade Replacement 4.4.3. Blade ReplacementBattery Installation 1. Slide battery into battery cradle Battery ServiceNEW Battery Preparation 1. Remove battery from carton Battery TestingProblem Probable Cause Trouble Shooting on NextCorrective Action Excessive Vibration Problem Probable Cause Corrective ActionMAINTENANCE/REPLACEMENT Parts Service Performed Each100 USE HRS SeasonDisclaimer of Warranty Year Limited WarrantyPrimary Maintenance Primary Maintenance Primary Maintenance Primary Maintenance European Scrambler Hydro Drive Series

EYZ16335BVE specifications

The Snapper EYZ16335BVE is a versatile and powerful lawn mower designed for both residential and commercial use. Known for its exceptional cutting ability and user-friendly features, this model stands out in the competitive outdoor power equipment market.

At the heart of the Snapper EYZ16335BVE is a robust 163cc engine that delivers reliable power and efficient operation. The engine is designed to provide ample torque, ensuring that the mower can handle tough turf as well as fine lawns with ease. The self-propelled feature enhances maneuverability, allowing users to navigate through various terrains without putting extra strain on themselves.

One of the standout characteristics of the EYZ16335BVE is its 21-inch steel mowing deck, which provides superior durability and a wide cutting path for faster mowing. This model offers adjustable cutting heights, allowing users to choose between different grass lengths ranging from 1 to 4 inches. The ability to customize the cut makes it suitable for diverse grass types and can contribute to healthier lawn growth.

The Snapper EYZ16335BVE is equipped with a reliable 3-in-1 cutting system, offering options for mulching, bagging, or side discharge. This versatility allows users to manage lawn clippings efficiently based on their preferences or lawn care requirements. The mulching feature returns finely chopped clippings to the lawn, providing natural fertilization.

Ergonomically designed, this lawn mower includes a padded handle for comfort during operation. Its lightweight construction ensures that it is easy to maneuver and transport, reducing user fatigue during extended mowing sessions. The foldable handle is an additional convenience, making storage simple and efficient.

In terms of maintenance, the Snapper EYZ16335BVE is designed for ease of service. Accessible air filters and an easy-start engine design simplify routine maintenance tasks, ensuring that the mower operates at peak performance year-round.

Overall, the Snapper EYZ16335BVE embodies innovation and practicality, making it a reliable choice for homeowners and landscaping professionals. With its exceptional features, solid construction, and advanced technologies, it provides an efficient mowing solution that meets the demands of various lawn care needs. Whether tackling vast lawns or navigating smaller residential yards, the Snapper EYZ16335BVE consistently delivers results that exceed expectations.
Top Page Image Contents