Snapper EYZ16335BVE Problem Probable Cause Corrective Action, Excessive Vibration

Page 25

TROUBLESHOOTING

PROBLEM

 

PROBABLE CAUSE

 

CORRECTIVE ACTION

 

 

 

Excessive Vibration

1. Damaged, out of balance or bent mower blades.

1. Service mower blade(s).

 

2. Loose blade components.

2. Service and tighten loose parts.

 

3. Loose or missing air lift (if equipped).

3. Replace air lifts. Tighten to proper torque.

 

4. Lumpy or frayed belt.

4. Replace belt.

 

5. Bent Idler, stationary or spindle pulley.

5. Replace pulley.

Rider Will Not Move Or

1. Joystick in the neutral “N” position.

1.

Place joystick in desired speed position.

Loss Of Traction

2. Roll release lever is in “ROLL” position.

2.

Move roll release lever to the engaged position.

 

3.

Low transmission hydraulic oil level.

3.

Contact authorized SNAPPER dealer.

 

4.

Parking Brake engaged.

4.

Move parking brake to disengaged position.

 

5.

Traction drive belt requires replacement.

5.

Replace traction drive belt.

Blade(s) Not Cutting

1. Blade engagement switch in the “OFF” position.

1.

Move blade switch to the “ON” position.

 

2.

Clutch belt slipping.

2.

Replace clutch belt.

 

3.

Mower belt slipping.

3.

Replace mower belt.

 

4.

Electric clutch not functioning.

4.

Contact authorized SNAPPER dealer.

Cutting Grass

1. Uneven tire pressure.

1.

Bring to proper pressure.

Improperly

2. Cutting height too low or high.

2.

Adjust cutting height.

 

3.

Engine speed too slow.

3.

Move engine speed control to “FAST” position.

 

4.

Forward speed too fast.

4.

Move joystick to a slower speed.

 

5.

Terraced cut, side to side.

5.

Adjust side to side level.

 

6.

Excessive deck pitch, front to rear.

6.

Adjust front to rear pitch.

 

7.

Cutting blade(s) dull or damaged.

7.

Sharpen cutting edges or replace blade(s).

 

8.

Blade belt slipping.

8.

Replace blade belt.

 

9.

Check electric clutch.

9.

Adjust to proper specifications.

 

10. Check clutch belt.

10. Replace clutch belt.

Poor Grass Discharge

1. Engine speed too slow.

1.

Move engine speed control to “FAST” position.

 

2.

Forward speed too fast.

2.

Move joystick to a slower speed.

 

3.

Grass is wet.

3.

Mow when grass is dry.

 

4.

Excessively worn or damaged blade(s).

4.

Service mower blade(s).

 

5.

Build up of grass clippings and debris under deck.

5.

Clean deck.

 

6.

Improper blade(s) installed on deck.

6.

Install proper SNAPPER blades.

 

7.

Blade(s) installed improperly on deck.

7.

Install blades properly.

Battery Will Not Charge

1. Poor cable connections.

1.

Clean cables and battery terminals.

 

2.

Bad battery cell(s).

2.

Replace with new battery.

 

3.

Faulty alternator.

3.

Contact engine manufacturer’s dealer.

Oil Leaking

1. Leaking hose fittings, clamps or reservoir.

1.

Verify fittings and hose clamps are tight.

26

Image 25
Contents Model Number Explanation European Scrambler Hydro Drive SeriesPreparation Protection for Children Protection Against TipoversOperation Safe Handling of GasolineMaintenance Table of Contents Introduction FamiliarizationNomenclature Familiarization Decals / Symbols PRE-START Check List Operating InstructionsStarting & Operation Engine Electric Start Stopping Mower BladeEngine Parking BrakeEngine Must not Start if Cutting Height AdjustmentEngine should Start if Engine Must Begin to Stop ifService After First 5 Hours MaintenanceChange Engine OIL Check Mower BladeCheck Engine Checking Mower Belt TensionEngine Cooling System Engine Oil Oil Filter Fuel Filter Air FilterUnderside View of 33 Deck Mower ComponentsFront Caster Wheel Pivot Shaft Scrambler Lubrication 1. Front Wheel BearingsParking Brake Pivot Bushings Storage OUT of Season Service AnnuallyDo not attempt any adjustments, maintenance Adjustments & RepairService or repairs with the engine running. Stop Neutral PositionMower Drive Belt Adjustment Engine Adjustments & RepairBelt Replacement Belt ReplacementsAdjusting Mower Blade Blade Brake AdjustmentDown Eccentric Loosen Shoulder Bolt Mower Blade Replacement 4.4.1. Blade Wear Limits Wheel Brake AdjustmentMower Deck Timing ROD Blade SharpeningBattery Battery Removal Mower Blade Replacement 4.4.3. Blade ReplacementBattery Installation 1. Slide battery into battery cradle Battery ServiceNEW Battery Preparation 1. Remove battery from carton Battery TestingTrouble Shooting on Next Problem Probable CauseCorrective Action Excessive Vibration Problem Probable Cause Corrective ActionMAINTENANCE/REPLACEMENT Parts Service Performed Each100 USE HRS SeasonDisclaimer of Warranty Year Limited WarrantyPrimary Maintenance Primary Maintenance Primary Maintenance Primary Maintenance European Scrambler Hydro Drive Series

EYZ16335BVE specifications

The Snapper EYZ16335BVE is a versatile and powerful lawn mower designed for both residential and commercial use. Known for its exceptional cutting ability and user-friendly features, this model stands out in the competitive outdoor power equipment market.

At the heart of the Snapper EYZ16335BVE is a robust 163cc engine that delivers reliable power and efficient operation. The engine is designed to provide ample torque, ensuring that the mower can handle tough turf as well as fine lawns with ease. The self-propelled feature enhances maneuverability, allowing users to navigate through various terrains without putting extra strain on themselves.

One of the standout characteristics of the EYZ16335BVE is its 21-inch steel mowing deck, which provides superior durability and a wide cutting path for faster mowing. This model offers adjustable cutting heights, allowing users to choose between different grass lengths ranging from 1 to 4 inches. The ability to customize the cut makes it suitable for diverse grass types and can contribute to healthier lawn growth.

The Snapper EYZ16335BVE is equipped with a reliable 3-in-1 cutting system, offering options for mulching, bagging, or side discharge. This versatility allows users to manage lawn clippings efficiently based on their preferences or lawn care requirements. The mulching feature returns finely chopped clippings to the lawn, providing natural fertilization.

Ergonomically designed, this lawn mower includes a padded handle for comfort during operation. Its lightweight construction ensures that it is easy to maneuver and transport, reducing user fatigue during extended mowing sessions. The foldable handle is an additional convenience, making storage simple and efficient.

In terms of maintenance, the Snapper EYZ16335BVE is designed for ease of service. Accessible air filters and an easy-start engine design simplify routine maintenance tasks, ensuring that the mower operates at peak performance year-round.

Overall, the Snapper EYZ16335BVE embodies innovation and practicality, making it a reliable choice for homeowners and landscaping professionals. With its exceptional features, solid construction, and advanced technologies, it provides an efficient mowing solution that meets the demands of various lawn care needs. Whether tackling vast lawns or navigating smaller residential yards, the Snapper EYZ16335BVE consistently delivers results that exceed expectations.