Snapper EMLP21501KWV, EMLP21601, EMLP21601E important safety instructions Belt Service

Page 13

Section 4 - REPAIR & ADJUSTMENTS

WARNING

DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Remove key. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool. Wear heavy leather gloves when handling or working around cutting blades. Blades are extremely sharp and can cause severe injury.

4.2WHEEL DRIVE CONTROL ADJUSTMENT (Continued From Previous Page)

3.Rotate turnbuckle (Located in the middle of the wheel drive control cable) clockwise or counter clockwise to align holes. See Figure 4.6.

CLOCKWISE

COUNTER

CLOCKWISE

TURN CENTER

SECTION OF

TURNBUCKLE AS

REQUIRED TO

ALIGN HOLES

FIGURE 4.6

4.3.BELT SERVICE

The condition of the engine to transmission belt should be checked after every 25 hours of mower operation.

4.3.1. Engine To Transmission Belt Replacement 1. Follow WARNING statement found on this page.

2. Remove the retaining screws that secure the belt cover. Remove the belt cover.

3. Disconnect belt from transmission pulley.

4. Tilt mower up on its rear wheels. Do not tilt mower with spark plug or carburetor down.

5. Remove the retaining bolts and nuts that secure the blade. Remove blade. See Figure 4.7.

6. Remove the belt from around engine pulley.

TILT MOWER

UP ON ITS

BACK WHEELS!

REMOVE MOUNTING

SCREWS AND NYLON

LOCK NUTS

TRACTION

BELT

RETAINING

SCREW

DRIVE

BELT

COVER

FIGURE 4.7

7.Install the new belt from around engine pulley. Insert belt through opening in deck.

8.Secure the blade with retaining bolts and nuts. Tighten nuts and bolts to 30 to 40 ft. lbs.

9.Install new belt over transmission pulley. Install belt cover and secure with retaining bolts. Tighten securely.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents European 21 Cast Aluminum Deck M Model Walk Mowers Series Slope Operation Protection for ChildrenPreparation Operation Maintenance and StorageTable of Contents Introduction FamiliarizationNomenclature PRE-START Check List Operating InstructionsStarting & Operation 2.2.1. Engine & Blade Primer Models Recoil StartEngine & Blade Handle Height AdjustmentChoke Models Recoil Start Propelling MowerInstallation of Grass Catcher Cutting Height AdjustmentRecycling Operation Service After First 5 Hours 3.2.1. Change Engine OIL MaintenanceGrease Level in Transmission Wheel Drive ControlStorage Procedure Service AnnuallyCheck Mower Blade Check Engine to Transmission Drive BeltMower Blade Replacement 4.1.1. Standard Blade Wear Limit Repair & AdjustmentsBlade Sharpening On NextWheel Drive Control Adjustment Belt Service Battery Battery Removal Adjustments & RepairBattery Installation Battery ServiceNEW Battery Preparation Battery TestingState of Charge Digital Voltmeter Using Recoil Starter Problem Probable Cause Corrective ActionStart Using Engine Will NotClean Sponge Element Engine Manual Service Performed Each100 USE HRS SeasonDecal Identification Height Control Decal Disclaimer of Warranty Year Limited WarrantyEuropean Cast Aluminum Deck M Model Walk Mowers Series

EMLP21501KWV, EMLP21601, EMLP21601E specifications

Snapper EMLP21501KWV, EMLP21601, and EMLP21601E are innovative lawn care solutions designed to meet the diverse needs of homeowners and professional landscapers alike. These models stand out in the lawn maintenance industry due to their unique features, advanced technologies, and reliable performance.

The Snapper EMLP21501KWV is notable for its powerful engine and user-friendly design. It is equipped with a robust 150cc engine that ensures efficient mowing performance across various terrain types. This model features a 21-inch steel mowing deck, which enables a precise cutting width, ensuring an even finish on lawns of all shapes and sizes. One of the main characteristics of the EMLP21501KWV is its ease of use, thanks to the push-button start system, which allows users to start the mower effortlessly.

In contrast, the EMLP21601 and EMLP21601E models introduce advanced features that take lawn care to the next level. The EMLP21601 is equipped with a more powerful engine, capable of delivering enhanced torque and performance. This model also features Snapper's signature Smart Speed technology, which allows users to choose from different speed settings for efficient mowing in various conditions. The larger 21-inch deck is complemented by an adjustable cutting height, providing versatility for different grass types and seasonal conditions.

The EMLP21601E further enhances the user experience with electric start capabilities, making it easier for homeowners to start the mower without the hassle of pull cords. Additionally, this model includes a rear bagger option for convenient grass collection, which helps maintain a tidy lawn and reduces cleanup time after mowing.

All three models are designed with durability in mind, featuring high-quality components that can withstand the rigors of regular use. They are equipped with ergonomic handles, ensuring a comfortable grip during operation, and foldable designs for easy storage in smaller spaces.

In summary, the Snapper EMLP21501KWV, EMLP21601, and EMLP21601E mowers offer powerful performance, advanced technology, and user-friendly features that cater to a wide range of mowing needs. Whether for personal use or professional landscaping, these models provide an excellent combination of power, efficiency, and convenience, making them an ideal choice for anyone looking to maintain a beautiful lawn.
Top Page Image Contents