Snapper EMLP21501KWV, EMLP21601, EMLP21601E Adjustments & Repair, Battery Battery Removal

Page 14

Section 4 - ADJUSTMENTS & REPAIR

WARNING

DO NOT attempt any adjustments, maintenance or service with the engine and blade running. STOP engine and blade. Remove key. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool. DO NOT attempt to service or charge the battery while it is installed on the machine.

4.4 BATTERY

4.4.1. BATTERY REMOVAL

1.Loosen bolts that secure battery bracket to the deck. See Figure 4.8.

MAIN

HARNESSBATTERY

HARNESS

TERMINAL

NEGATIVECOVER TERMINAL

ENGINE

HARNESS

POSITIVE

TERMINAL

BATTERY

 

BRACKET

BATTERY

 

FIGURE 4.8

2.Unplug battery harness from main harness. See Figure 4.9.

3.Carefully slide battery from battery bracket.

WARNING

Cables must be connected to battery terminals in the proper position. DO NOT attempt to charge battery while installed on the machine. DO NOT use “BOOST” chargers on the battery.

4.4.2. BATTERY INSTALLATION

1.Slide battery into battery bracket. Tighten bolts.

2.Plug battery harness into main harness. See Figure

4.4.3. BATTERY SERVICE

The battery supplied with the electric start model mowers is a sealed lead acid type battery. After initial activation the battery is sealed. No fluid level maintenance is required. DO NOT attempt to check or adjust fluid level in battery.

1.Remove battery. Refer to Section “BATTERY REMOVAL”.

2.Place battery in a well ventilated area on a level surface.

3.Slow charge battery at 1 amp for 10 hours.

4.If battery will not accept charge or is partially charged after 10 hours of charging at 1 amp, replace with new battery.

4.4.4. BATTERY STORAGE

If mower is to be stored, it is recommended the battery be removed, charged and stored.

1.Remove battery. Refer to Section “BATTERY REMOVAL”.

2.Perform battery service.

3.Bring battery to full charge, if required.

4.Store battery in an area away from the machine on a wood surface. DO NOT STORE BATTERY ON A CONCRETE SURFACE.

(Continue to next page for Battery Testing)

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents European 21 Cast Aluminum Deck M Model Walk Mowers Series Preparation Protection for ChildrenSlope Operation Maintenance and Storage OperationTable of Contents Nomenclature FamiliarizationIntroduction Starting & Operation 2.2.1. Engine & Blade Operating InstructionsPRE-START Check List Primer Models Recoil StartChoke Models Recoil Start Handle Height AdjustmentEngine & Blade Propelling MowerRecycling Operation Cutting Height AdjustmentInstallation of Grass Catcher Grease Level in Transmission MaintenanceService After First 5 Hours 3.2.1. Change Engine OIL Wheel Drive ControlCheck Mower Blade Service AnnuallyStorage Procedure Check Engine to Transmission Drive BeltBlade Sharpening Repair & AdjustmentsMower Blade Replacement 4.1.1. Standard Blade Wear Limit On NextWheel Drive Control Adjustment Belt Service Battery Installation Adjustments & RepairBattery Battery Removal Battery ServiceState of Charge Digital Voltmeter Battery TestingNEW Battery Preparation Start Using Problem Probable Cause Corrective ActionUsing Recoil Starter Engine Will Not100 Service Performed EachClean Sponge Element Engine Manual USE HRS SeasonDecal Identification Height Control Decal Year Limited Warranty Disclaimer of WarrantyEuropean Cast Aluminum Deck M Model Walk Mowers Series

EMLP21501KWV, EMLP21601, EMLP21601E specifications

Snapper EMLP21501KWV, EMLP21601, and EMLP21601E are innovative lawn care solutions designed to meet the diverse needs of homeowners and professional landscapers alike. These models stand out in the lawn maintenance industry due to their unique features, advanced technologies, and reliable performance.

The Snapper EMLP21501KWV is notable for its powerful engine and user-friendly design. It is equipped with a robust 150cc engine that ensures efficient mowing performance across various terrain types. This model features a 21-inch steel mowing deck, which enables a precise cutting width, ensuring an even finish on lawns of all shapes and sizes. One of the main characteristics of the EMLP21501KWV is its ease of use, thanks to the push-button start system, which allows users to start the mower effortlessly.

In contrast, the EMLP21601 and EMLP21601E models introduce advanced features that take lawn care to the next level. The EMLP21601 is equipped with a more powerful engine, capable of delivering enhanced torque and performance. This model also features Snapper's signature Smart Speed technology, which allows users to choose from different speed settings for efficient mowing in various conditions. The larger 21-inch deck is complemented by an adjustable cutting height, providing versatility for different grass types and seasonal conditions.

The EMLP21601E further enhances the user experience with electric start capabilities, making it easier for homeowners to start the mower without the hassle of pull cords. Additionally, this model includes a rear bagger option for convenient grass collection, which helps maintain a tidy lawn and reduces cleanup time after mowing.

All three models are designed with durability in mind, featuring high-quality components that can withstand the rigors of regular use. They are equipped with ergonomic handles, ensuring a comfortable grip during operation, and foldable designs for easy storage in smaller spaces.

In summary, the Snapper EMLP21501KWV, EMLP21601, and EMLP21601E mowers offer powerful performance, advanced technology, and user-friendly features that cater to a wide range of mowing needs. Whether for personal use or professional landscaping, these models provide an excellent combination of power, efficiency, and convenience, making them an ideal choice for anyone looking to maintain a beautiful lawn.
Top Page Image Contents