Snapper EMLP21501KWV, EMLP21601, EMLP21601E Maintenance, Grease Level in Transmission

Page 9

Section 3 - MAINTENANCE

3.1INTRODUCTION

To retain the quality of the mower, use genuine SNAPPER replacement parts only. Contact a local SNAPPER dealer for parts and service assistance. For the correct part or information for a particular mower, always mention model and serial number.

3.2SERVICE - AFTER FIRST 5 HOURS 3.2.1. CHANGE ENGINE OIL

WARNING

DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Remove key. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

1.Disconnect spark plug wire and secure end away from plug. The items needed to perform oil change are: cloth rags, (1) 3/8” drive ratchet with a short extension and (1) shallow pan.

2.Tilt mower up on its rear wheels for access to the oil drain plug located underneath the mower deck. Do not tilt mower with spark plug or carburetor down. See Figure 3.1.

TILT MOWER UP ON ITS BACK WHEELS

OIL DRAIN PLUG

5.Lower the mower down and place the piece of wood under left rear wheel. Reach back under mower and remove drain plug and allow oil to drain out completely in pan. Some oil may spill onto drive belt and hands, immediately wipe hands clean with cloth rags. Dispose of oil properly.

NOTE: Some oil may drain onto drive belt but will not affect the operation or life of the belt. Wipe excess oil from belt.

6.Tilt mower back up and replace drain plug. Tighten securely but do not over tighten.

7.Fill engine with oil as specified in Engine Owner’s Manual. Thereafter, change oil after each 25 hours of use.

3.2.2. GREASE LEVEL IN TRANSMISSION

The transmission requires no lubrication or maintenance. If transmission leaks or malfunctions, return machine to an authorized Snapper dealer for repair.

3.2.3. WHEEL DRIVE CONTROL

The wheel drive control requires periodic adjustment to maintain proper drive function. The adjustment is performed with the turnbuckle located on the wheel drive control cable and requires no tools. Refer to

Section “WHEEL DRIVE CONTROL ADJUSTMENT”.

FIGURE 3.1

3.Place shallow pan underneath the approximate center of the oil drain plug.

4.Loosen with ratchet and short extension, but do not remove oil drain plug. Loosen plug until you can turn it with your fingers.

9

Image 9
Contents European 21 Cast Aluminum Deck M Model Walk Mowers Series Protection for Children Slope OperationPreparation Operation Maintenance and StorageTable of Contents Familiarization IntroductionNomenclature PRE-START Check List Operating InstructionsStarting & Operation 2.2.1. Engine & Blade Primer Models Recoil StartEngine & Blade Handle Height AdjustmentChoke Models Recoil Start Propelling MowerCutting Height Adjustment Installation of Grass CatcherRecycling Operation Service After First 5 Hours 3.2.1. Change Engine OIL MaintenanceGrease Level in Transmission Wheel Drive ControlStorage Procedure Service AnnuallyCheck Mower Blade Check Engine to Transmission Drive BeltMower Blade Replacement 4.1.1. Standard Blade Wear Limit Repair & AdjustmentsBlade Sharpening On NextWheel Drive Control Adjustment Belt Service Battery Battery Removal Adjustments & RepairBattery Installation Battery ServiceBattery Testing NEW Battery PreparationState of Charge Digital Voltmeter Using Recoil Starter Problem Probable Cause Corrective ActionStart Using Engine Will NotClean Sponge Element Engine Manual Service Performed Each100 USE HRS SeasonDecal Identification Height Control Decal Disclaimer of Warranty Year Limited WarrantyEuropean Cast Aluminum Deck M Model Walk Mowers Series

EMLP21501KWV, EMLP21601, EMLP21601E specifications

Snapper EMLP21501KWV, EMLP21601, and EMLP21601E are innovative lawn care solutions designed to meet the diverse needs of homeowners and professional landscapers alike. These models stand out in the lawn maintenance industry due to their unique features, advanced technologies, and reliable performance.

The Snapper EMLP21501KWV is notable for its powerful engine and user-friendly design. It is equipped with a robust 150cc engine that ensures efficient mowing performance across various terrain types. This model features a 21-inch steel mowing deck, which enables a precise cutting width, ensuring an even finish on lawns of all shapes and sizes. One of the main characteristics of the EMLP21501KWV is its ease of use, thanks to the push-button start system, which allows users to start the mower effortlessly.

In contrast, the EMLP21601 and EMLP21601E models introduce advanced features that take lawn care to the next level. The EMLP21601 is equipped with a more powerful engine, capable of delivering enhanced torque and performance. This model also features Snapper's signature Smart Speed technology, which allows users to choose from different speed settings for efficient mowing in various conditions. The larger 21-inch deck is complemented by an adjustable cutting height, providing versatility for different grass types and seasonal conditions.

The EMLP21601E further enhances the user experience with electric start capabilities, making it easier for homeowners to start the mower without the hassle of pull cords. Additionally, this model includes a rear bagger option for convenient grass collection, which helps maintain a tidy lawn and reduces cleanup time after mowing.

All three models are designed with durability in mind, featuring high-quality components that can withstand the rigors of regular use. They are equipped with ergonomic handles, ensuring a comfortable grip during operation, and foldable designs for easy storage in smaller spaces.

In summary, the Snapper EMLP21501KWV, EMLP21601, and EMLP21601E mowers offer powerful performance, advanced technology, and user-friendly features that cater to a wide range of mowing needs. Whether for personal use or professional landscaping, these models provide an excellent combination of power, efficiency, and convenience, making them an ideal choice for anyone looking to maintain a beautiful lawn.