Manuals / Sears / Fitness & Sports / Home Gym

Sears 831.159460 user manual Cable Diagram, Long Cable TOP VIEW, Medium Cable, Short Cable

Models: 831.159460

1 28

Page 22

CABLE DIAGRAM

The diagram below shows the proper routing of the Short Cable (35), the Medium Cable (58), and the Long Cable (23). Use the diagram to be sure that the cables and the cable traps have been assembled correctly. If the cables have not been correctly routed, the home gym system will not function properly and damage may occur. The inset drawings show the proper positioning of the cable traps. The cable traps should be positioned so that the cables will not come off the pulleys. Be sure that the cable traps do not touch or bind the cables.

1—High Pulley

Long Cable (23)

TOP VIEW

5—Long “U”-Bracket

Medium Cable (58)

Short Cable (35)

8—Weight Stack

1—Low Pulley

Page 22

Image 22

Sears 831.159460 user manual Cable Diagram, Long Cable TOP VIEW, Medium Cable, Short Cable

Contents

PATENT PENDING Model No Serial NoUSERS MANUAL FULL 90 DAY WARRANTY TABLE OF CONTENTSSEARS, ROEBUCK AND CO., DEPT. 817WA, HOFFMAN ESTATES, IL 8. Keep hands and feet away from moving parts IMPORTANT PRECAUTIONS9. Always wear athletic shoes for foot protection BEFORE YOU BEGIN THE FOLLOWING TOOLS NOT INCLUDED ARE REQUIRED FOR ASSEMBLY ASSEMBLYFRAME ASSEMBLY Two 2 adjustable wrenches One 1 standard screwdriverTighten all Nylon Locknuts used in steps 1 through Carriage Bolt. Do not tighten the NylonLocknuts yet FRAME ASSEMBLYindicated tube in the Base. Be sure that 4. Note This will be a tight fit. The PlasticBushings should fit on each end of the the 3 1/2” Pulleys 15 are on the indicatedARM ASSEMBLY CABLE ASSEMBLY Long Cable Trap is positioned to hold the Cable in placeCABLE ASSEMBLY 20 can move freely 17. See the inset drawing. Attach a 3 1/2” PulleyCABLE ASSEMBLY Inset shows view from other side Inset shows viewfrom other side CABLE ASSEMBLYIt should be threaded onto the end of the CABLE ASSEMBLY SEAT ASSEMBLYnot completely tighten the Nylon Locknut Cable so only a couple of threads areSEAT ASSEMBLY Square Inner Caps may come pre-assem- bled Cable 35 and the Curl Bar 86 as shownSEAT ASSEMBLY VKR ASSEMBLY BUTTERFLY HIGH PULLEYOTHER SIDE LIFESTYLER SYSTEMATTACHING THE LAT BAR OR NYLON STRAP TO THE HIGH PULLEY STATION ADJUSTMENTCHANGING THE WEIGHT SETTING ATTACHING THE LAT BAR OR NYLON STRAP TO THE LOW PULLEY STATIONATTACHING THE LEG LEVER TO THE LOW PULLEY STATION USING THE CURL BARATTACHING AND REMOVING THE SEAT ATTACHING AND REMOVING THE CURL FRAMEPRESS ARM ADJUSTING THE SHORT CABLEWEIGHT RESISTANCE CHART BUTTERFLY ARMTROUBLE-SHOOTING AND MAINTENANCE TIGHTENING THE CABLESMedium Cable CABLE DIAGRAMLong Cable TOP VIEW Short Cable1/2 x 3/4 Spacer 5/8 x 9/16 Spacer1/2 x 1/2 Bushing 1/2 x 3/8 Spacer 1 x 7/8 Plastic Bushing 1 Square Inner Cap5/16 Nylon Locknut3-23 1/4 Nylon Locknut1/4 x 2 Screw 1/4 x 2 Carriage BoltCable Clip 3/8 x 3 1/2 Bolt 3/8 x 3 3/4 Bolt 5/16 x 5 Bolt 5/16 x 6 Bolt1 1/4 x 2 1/2 Plastic Bushing 1 RetainerPart PART LIST-Model NoR0696A DescriptionR0995A EXPLODED DRAWING-Model NoEXPLODED 3738If you find that a part is missing or you need to schedule repair serviceModel No you need help assembling or operating the LIFESTYLER SYSTEM