Sears 831.159460 user manual Inset shows view from other side, Cable Assembly

CABLE ASSEMBLY

22.Locate the Medium Cable (58). Route the Medium Cable (58) under the 3 1/2” Low Pulley (92) attached to the lower hole in the Press Frame (17). Be sure that the end of the Cable with the ball is on the indicated side of the Press Frame and that the Cable is between the Pulley and the crossbar on the Press Frame. Tighten the 3/8” Nylon Locknut (21) and the 3/8” x 3 3/4” Bolt (not shown).

23.Route the Medium Cable (58) around the

3 1/2” Pulley (15) attached to the lower hole in the Front Upright (42). See the inset draw- ing. Be sure that the Cable Trap (66) is turned to hold the Cable in place and that the Cable is routed around the Pulley as shown. Tighten the 3/8” Nylon Locknut (21) and the 3/8” x 3 3/4” Bolt (71).

24.Route the Medium Cable (58) around the 3 1/2” Pulley (15) attached to the upper hole in the Press Frame (17). Be sure that the Cable

Trap (66) is turned to hold the Cable in place and that the Cable is routed around the Pulley as shown. Tighten the 3/8” Nylon Locknut (21) and the 3/8” x 3 1/2” Bolt (not shown).

22

	17
21

92

Ball

58 Crossbar

23
		42
	42
			15

15 71

66

58

58

21
	Inset shows view
	from other side

24

58

15

66

21

17

25.Route the Medium Cable (58) around the 3 1/2” Pulley (15) attached to the upper hole in the Front Upright (42). See the inset drawing.

Be sure that the Cable Trap (66) is turned to hold the Cable in place and that the Cable is routed around the Pulley as shown. Tighten the 3/8” Nylon Locknut (21) and the 3/8” x 3 3/4” Bolt (71).

25

58

15

42

21

42

15

71

66

58

Inset shows view

from other side

12