Snapper P215013KWV, CP216012RV, CP216512RV Drive Spring Repair/Replacement, Driven Disc Adjustment

Page 14

Section 4 - REPAIR & ADJUSTMENTS

WARNING

DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

4.3.1. Cleaning Drive Disc & Driven Disc.

If oil or grease on the drive disc or driven disc is causing slippage, clean discs as follows:

1.Wipe away any oil or grease with a clean cloth.

2.Use either an approved grease solvent or hot, soapy water to clean drive disc or driven disc.

3.Rinse components with clean water.

4.Dry components with a clean cloth.

4.3.2. Drive Spring Repair/Replacement

If drive spring is loose, reconnect as shown in Figure 4.6. If spring is broken, replace with new spring.

IMPORTANT: If machine drive system continues slipping see Trouble Shooting section.

USE NEEDLE NOSE

PLIERS TO INSTALL

DRIVE SPRING

4.3.3. DRIVEN DISC ADJUSTMENT

If the drive disc and driven disc are clean and the mower drive is still slipping, adjust the driven disc as follows:

1.Place ground speed control in the number six “FAST” speed position.

2.Remove driven disc spring from driven disc assembly. Remove transfer rod connector nut and remove ball joint/transfer rod from driven disc assembly anchor point. See Figure 4.7.

DRIVEN DISC

ASSEMBLY

DRIVE

DISC

DRIVEN DISC

SPRING

BALL JOINT

ANCHOR

POINT

TRANSFER ROD

CONNECTOR

NUT

FIGURE 4.7

(Continued On Next Page)

DRIVE

SPRING

FIGURE 4.6

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Steel Deck Walk Mowers Commercial Model Series Important Safety Instructions Operation Table of Contents Introduction NomenclatureOperating Instructions PRE-START Check ListStopping Cutting Height AdjustmentHandle Height Adjustment Recycling Operation Optional Accessory Installation of Grass CatcherMaintenance Service After First 5 HoursCheck Engine Drive Belt Check Grease Level in TransmissionCheck Mower Blade Engine Air Filter Engine Oil Service AnnuallyStorage Procedure Mower Blade Replacement 4.1.1. Standard Blade Wear Limit Blade SharpeningOn next Wheel Drive Control AdjustmentDriven Disc Service Drive Spring Repair/Replacement Driven Disc AdjustmentReplacing Driven Disc Rubber Ring Replacing Bearing In Driven Disc Belt Service Engine Drive Belt Replacement 1. Empty the fuel tankPulley Position Troubleshooting Problem Probable Cause Corrective ActionUSE HRS Season Service Performed EachMAINTENANCE/REPLACEMENT Parts Year Limited Warranty Disclaimer of WarrantyPrimary Maintenance Primary Maintenance Primary Maintenance Primary Maintenance Service Notes Service Notes Steel Deck Walk Mowers Commercial Model Series

P215013KWV, CP214012R2, CP215512KWV, CP216512RV, CP216012RV specifications

The Snapper CP215512KWV, CP216012RV, CP214012R2, CP216512RV, and P215013KWV represent a series of innovative and efficient lawn mowers designed to cater to the varying needs of homeowners and landscapers alike. These models are known for their superior performance, durability, and user-friendly features, making them popular choices in the outdoor equipment market.

One of the standout features across these models is their powerful engines, designed to deliver reliable performance for cutting grass in various conditions. The CP215512KWV, for instance, is equipped with a robust engine that ensures efficient operation, while the CP216012RV boasts enhanced power for tackling thicker grass and tougher terrain. These mowers feature variable speed control, allowing users to adjust the cutting speed to match their comfort level and the specific type of lawn they are maintaining.

Additionally, the Snapper mowers come with advanced cutting technology. The signature 3-in-1 cutting system enables users to mulch, bag, or side discharge clippings, providing flexibility depending on lawn care preferences. This versatility is complemented by adjustable cutting heights, allowing users to choose the optimal grass length for their lawns.

Durability is a key characteristic of these models. Built with high-quality materials and reinforced decks, they can withstand the rigors of regular use. The CP214012R2, for example, features a heavy-duty steel deck that not only enhances stability during operation but also provides a longer lifespan for the mower.

Convenience features such as self-propulsion systems and easy-start engines further enhance the user experience. The CP216512RV model incorporates ergonomic handles and lightweight designs, making it easier to maneuver across lawns of various sizes. Additionally, the foldable handles simplify storage and transport.

With a focus on modern technology, Snapper has integrated cutting-edge technology into these mowers to improve efficiency and reduce maintenance requirements. Features such as easy-access air filters and maintenance reminders make it simpler for users to keep their machines in optimal condition.

In summary, the Snapper CP215512KWV, CP216012RV, CP214012R2, CP216512RV, and P215013KWV offer a blend of power, versatility, and durability that makes them suitable for both residential and commercial use. Their thoughtful design and reliable technology contribute to a superior mowing experience, ensuring that users achieve an immaculate lawn with less effort.
Top Page Image Contents