Snapper CP214012R2, CP216012RV Wheel Drive Control Adjustment, Driven Disc Service, On next

Page 13

Section 4 - REPAIR & ADJUSTMENTS

WARNING

DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool. Wear heavy leather gloves when handling or working around cutting blades. Blades are extremely sharp and can cause severe injury.

NOTE: The following sections 4.2 through 4.4 are for self-propelled models only.

4.2WHEEL DRIVE CONTROL ADJUSTMENT

1. The wheel drive control is properly adjusted when there is 1/16” to 1/8” clearance between the inside of the spring hook and the inside of the clutch cable eye with the wheel drive control released. See Figure 4.4.

CLUTCH CABLE

 

VINYL SPRING COVER

 

1/16” TO 1/8”

CLUTCH CABLE

CLEARANCE

EYE

UPPER

 

SPRING

SPRING HOOK

 

LOWER

 

SPRING

 

CABLE

CLUTCH CABLE EYE

SPRING

4. If the wheel drive control fails to return quickly to the “OFF” position when released, check for binding at the cable clips located on the side of the right handle. The upper clip should be located 2” below the upper bolt; the lower clip should be 4” above the lower bolt. The cable should slide freely with the clips installed at these locations.

4.3DRIVEN DISC SERVICE

If the mower does not propel itself properly, check for the following problems: See Figure 4.5

DRIVEN DISC &

 

RUBBER RING

POLY-V-BELT

DRIVE

 

SPRING

 

DRIVE

DISC

ENGINE

DRIVE

BELT

FIGURE 4.5

1.Grease on drive disc causing slippage.

2.Broken or disconnected drive spring.

3.Driven disc is out of adjustment.

4.Driven disc rubber ring is worn – does not contact drive disc properly.

5.Worn Poly-V Belt or engine drive belt.

NOTE: If any of the above (1 thru 5) are causing problems, service as follows:

(Continued on next page)

FIGURE 4.4

2.To adjust, unhook upper spring from cable eye and rotate spring in direction required to extend or shorten spring length.

3.Rehook upper spring to cable eye and check clearance. Repeat procedure if required.

NOTE: The vinyl spring cover should be kept over the spring at all times except for adjustments.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Steel Deck Walk Mowers Commercial Model Series Important Safety Instructions Operation Table of Contents Nomenclature IntroductionPRE-START Check List Operating InstructionsHandle Height Adjustment Cutting Height AdjustmentStopping Installation of Grass Catcher Recycling Operation Optional AccessoryService After First 5 Hours MaintenanceCheck Mower Blade Check Grease Level in TransmissionCheck Engine Drive Belt Storage Procedure Service AnnuallyEngine Air Filter Engine Oil Blade Sharpening Mower Blade Replacement 4.1.1. Standard Blade Wear LimitDriven Disc Service Wheel Drive Control AdjustmentOn next Driven Disc Adjustment Drive Spring Repair/ReplacementReplacing Driven Disc Rubber Ring Replacing Bearing In Driven Disc Engine Drive Belt Replacement 1. Empty the fuel tank Belt ServicePulley Position Problem Probable Cause Corrective Action TroubleshootingMAINTENANCE/REPLACEMENT Parts Service Performed EachUSE HRS Season Disclaimer of Warranty Year Limited WarrantyPrimary Maintenance Primary Maintenance Primary Maintenance Primary Maintenance Service Notes Service Notes Steel Deck Walk Mowers Commercial Model Series

P215013KWV, CP214012R2, CP215512KWV, CP216512RV, CP216012RV specifications

The Snapper CP215512KWV, CP216012RV, CP214012R2, CP216512RV, and P215013KWV represent a series of innovative and efficient lawn mowers designed to cater to the varying needs of homeowners and landscapers alike. These models are known for their superior performance, durability, and user-friendly features, making them popular choices in the outdoor equipment market.

One of the standout features across these models is their powerful engines, designed to deliver reliable performance for cutting grass in various conditions. The CP215512KWV, for instance, is equipped with a robust engine that ensures efficient operation, while the CP216012RV boasts enhanced power for tackling thicker grass and tougher terrain. These mowers feature variable speed control, allowing users to adjust the cutting speed to match their comfort level and the specific type of lawn they are maintaining.

Additionally, the Snapper mowers come with advanced cutting technology. The signature 3-in-1 cutting system enables users to mulch, bag, or side discharge clippings, providing flexibility depending on lawn care preferences. This versatility is complemented by adjustable cutting heights, allowing users to choose the optimal grass length for their lawns.

Durability is a key characteristic of these models. Built with high-quality materials and reinforced decks, they can withstand the rigors of regular use. The CP214012R2, for example, features a heavy-duty steel deck that not only enhances stability during operation but also provides a longer lifespan for the mower.

Convenience features such as self-propulsion systems and easy-start engines further enhance the user experience. The CP216512RV model incorporates ergonomic handles and lightweight designs, making it easier to maneuver across lawns of various sizes. Additionally, the foldable handles simplify storage and transport.

With a focus on modern technology, Snapper has integrated cutting-edge technology into these mowers to improve efficiency and reduce maintenance requirements. Features such as easy-access air filters and maintenance reminders make it simpler for users to keep their machines in optimal condition.

In summary, the Snapper CP215512KWV, CP216012RV, CP214012R2, CP216512RV, and P215013KWV offer a blend of power, versatility, and durability that makes them suitable for both residential and commercial use. Their thoughtful design and reliable technology contribute to a superior mowing experience, ensuring that users achieve an immaculate lawn with less effort.
Top Page Image Contents