Snapper CP216512RV, CP216012RV, CP215512KWV, CP214012R2, P215013KWV Replacing Bearing In Driven Disc

Page 16

Section 4 - REPAIR & ADJUSTMENTS

WARNING

DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

4.3.4.Replacing Driven Disc Rubber Ring (Continued From Previous Page)

2.Using needle nose pliers, unhook the drive spring and slide the driven disc assembly off the hex shaft. See Figure 4.10.

3.Remove the five machine screws and plate which secure the rubber ring to the driven disc hub. See Figure 4.11.

4.Install new rubber ring.

5.Reverse above procedures for reassembly and installation.

DRIVEN DISC

ASSEMBLY

FIGURE 4.10

DRIVEN DISC HUB

MACHINE

SCREWS

4.3.5. Replacing Bearing In Driven Disc

If the driven disc bearing fails, remove the driven disc assembly and replace bearing as follows:

1.Remove snap ring. See Figure 4.12.

THRUST

SHIM

PLATE

WASHER

 

SNAP

 

RING

BEARING

 

REMOVE FOUR

 

MACHINE SCREWS

 

 

DRIVEN

 

DISC HUB

DRIVEN DISC

RUBBER

DISC

PLATE

 

 

 

FIGURE 4.12

2.Slide the hub assembly out of the bearing.

3.Remove the four screws.

4.Remove bearing and replace with new bearing.

5.Reassemble components in reverse order.

RUBBER

RING

PLATE

FIGURE 4.11

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Steel Deck Walk Mowers Commercial Model Series Important Safety Instructions Operation Table of Contents Introduction NomenclatureOperating Instructions PRE-START Check ListHandle Height Adjustment Cutting Height AdjustmentStopping Recycling Operation Optional Accessory Installation of Grass CatcherMaintenance Service After First 5 HoursCheck Mower Blade Check Grease Level in TransmissionCheck Engine Drive Belt Storage Procedure Service AnnuallyEngine Air Filter Engine Oil Mower Blade Replacement 4.1.1. Standard Blade Wear Limit Blade SharpeningDriven Disc Service Wheel Drive Control AdjustmentOn next Drive Spring Repair/Replacement Driven Disc AdjustmentReplacing Driven Disc Rubber Ring Replacing Bearing In Driven Disc Belt Service Engine Drive Belt Replacement 1. Empty the fuel tankPulley Position Troubleshooting Problem Probable Cause Corrective ActionMAINTENANCE/REPLACEMENT Parts Service Performed EachUSE HRS Season Year Limited Warranty Disclaimer of WarrantyPrimary Maintenance Primary Maintenance Primary Maintenance Primary Maintenance Service Notes Service Notes Steel Deck Walk Mowers Commercial Model Series

P215013KWV, CP214012R2, CP215512KWV, CP216512RV, CP216012RV specifications

The Snapper CP215512KWV, CP216012RV, CP214012R2, CP216512RV, and P215013KWV represent a series of innovative and efficient lawn mowers designed to cater to the varying needs of homeowners and landscapers alike. These models are known for their superior performance, durability, and user-friendly features, making them popular choices in the outdoor equipment market.

One of the standout features across these models is their powerful engines, designed to deliver reliable performance for cutting grass in various conditions. The CP215512KWV, for instance, is equipped with a robust engine that ensures efficient operation, while the CP216012RV boasts enhanced power for tackling thicker grass and tougher terrain. These mowers feature variable speed control, allowing users to adjust the cutting speed to match their comfort level and the specific type of lawn they are maintaining.

Additionally, the Snapper mowers come with advanced cutting technology. The signature 3-in-1 cutting system enables users to mulch, bag, or side discharge clippings, providing flexibility depending on lawn care preferences. This versatility is complemented by adjustable cutting heights, allowing users to choose the optimal grass length for their lawns.

Durability is a key characteristic of these models. Built with high-quality materials and reinforced decks, they can withstand the rigors of regular use. The CP214012R2, for example, features a heavy-duty steel deck that not only enhances stability during operation but also provides a longer lifespan for the mower.

Convenience features such as self-propulsion systems and easy-start engines further enhance the user experience. The CP216512RV model incorporates ergonomic handles and lightweight designs, making it easier to maneuver across lawns of various sizes. Additionally, the foldable handles simplify storage and transport.

With a focus on modern technology, Snapper has integrated cutting-edge technology into these mowers to improve efficiency and reduce maintenance requirements. Features such as easy-access air filters and maintenance reminders make it simpler for users to keep their machines in optimal condition.

In summary, the Snapper CP215512KWV, CP216012RV, CP214012R2, CP216512RV, and P215013KWV offer a blend of power, versatility, and durability that makes them suitable for both residential and commercial use. Their thoughtful design and reliable technology contribute to a superior mowing experience, ensuring that users achieve an immaculate lawn with less effort.
Top Page Image Contents