Snapper 7800597, 7800600, 7800602, 7800601, 7800596 specifications Driven Disc Replacement

Page 18
DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

Maintenance

Maintenance (Continued)

 

 

 

Driven Disc Bearing Replacement

!

WARNING

!

 

IMPORTANT: The bearing on these machines is staked into the thrust plate. The bearing will have to be driven out with a mallet and a large punch. A new bearing with four retaining screws will have to be purchased to replace existing bearing.

 

 

 

If the driven disc bearing requires replacement, replace the

Driven Disc Replacement (Continued)

bearing as follows:

 

1. Remove the driven disc assembly. Refer to the Section

2. Using needle nose pliers, unhook the drive spring (A,

 

entitled “Driven Disc Replacement”.

 

Figure 28) and slide the driven disc assembly off the

 

 

2. Remove both snap rings

(A, Figure 29) that secure the

 

hex shaft.

 

 

 

 

rubber driven disc (B) to the thrust plate.

3. Remove the two snap rings (A, Figure 29) which secure

 

3. Slide the rubber driven disc hub out of the bearing.

 

the rubber driven disc (B) to the driven disc assembly.

 

4. Drive out the existing bearing (C).

4. Install a new rubber driven disc onto the driven disc

5. Install a new bearing and secure to the thrust plate with

 

assembly, and secure with the retaining rings.

 

 

four retaining screws. Tighten the screws securely.

5. Reverse the above procedures for reassembly and

 

6. Reassemble the components in reverse order.

 

installation of the driven disc assembly.

 

 

 

 

 

 

 

NOTE: Be sure to replace the shim washer (D) when reassembling

 

 

 

 

 

 

the iven disc assembly.

 

 

A

 

 

 

 

 

 

 

 

 

 

 

 

 

D

 

 

 

 

 

 

C

 

 

 

 

 

A

 

 

 

 

 

 

Figure 28: Removing the driven disc assembly

 

B

 

 

 

Reproduction

 

 

 

 

 

Figure 29: Replacing the driven disc

18

www.snapper.com

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Not Manual No Rev. ‘-’, 10/20/2009Briggs & Stratton Power Products Group, LLC Snapper is a trademarkJefferson, WI, USA Milwaukee, WI, USA. All Rights Reserved Table of Contents From Previous Column Important Operator Safety InstructionsProtection for Children Preparation Slope OperationMaintenance and Storage Safe Handling of Gasoline OperationFeatures and Controls Features and ControlsOperation Pre-Start Check List Starting and Operation EnginesOperation Stopping Handle Height AdjustmentOperation Propelling the MowerOperation Recycling Operation Removing the Recycling CoverInstalling the Discharge Deflector Door Type Bag Installing the Grass BagInstalling the Recycling Plug Grass Catcher bags used Snapper products are madeMaintenance Maintenance Maintenance IntroductionService After First 5 Hours Check Grease Level in TransmissionMaintenance Service PeriodicAge Pr cedure Mower Blade Replacement Standard Blade Wear LimitBlade Sharpening Wheel Drive Control Adjustment Self-Propelled Models Only Reprod Capscrew UctionDriven and Drive Disc Service Drive Spring Repair/ReplacementUction Driven Disc AdjustmentReprod From the outside edge of the drive disc B If the rubberDriven Disc Replacement Belts Maintenance Belt ServiceHex Shaft Replacing the Bearing On the Pulley EndBelts Transmiss on P ly-V Belt ReplacementDriven Disc Replacement for driven disc removal Procedure Drain the fuel tank before tipping the mower. Do not tiltService Schedule Maintenance/Replacement PartsTroubleshooting TroubleshootingThere is no other express warranty Improper electrolyteNot For Not For Not For Not For Snapper Products Macon Street McDonough, GA
Related manuals
Manual 28 pages 4.23 Kb

7800596, 7800597, 7800601, 7800602, 7800600 specifications

Snapper has long been known for its quality and innovation in outdoor power equipment, and their recent models, specifically the Snapper 7800596, 7800597, 7800600, 7800601, and 7800602, showcase this legacy perfectly. These lawn mowers combine power, ease of use, and technology to create a superior mowing experience.

The Snapper 7800596 and 7800597 are ideal for homeowners who desire robust performance. Both models are powered by a strong engine that offers reliable starts and efficient mowing. They feature a durable steel deck, ensuring longevity while withstanding the rigors of routine use. A standout feature is their adjustable cutting height, allowing users to choose between various grass lengths, ensuring a tailored cut for different lawn conditions.

Moving on to the Snapper 7800600 and 7800601, these models come equipped with advanced technologies that enhance user experience. The inclusion of a self-propelling mechanism significantly reduces the effort required by the operator, making mowing less of a chore. Furthermore, these mowers are designed with innovative blade technology, which optimizes cutting efficiency and grass discharge, resulting in a cleaner lawn finish.

The Snapper 7800602 rounds out this impressive lineup with its standout feature: a powerful battery-operated option. This model harnesses the latest in battery technology, ensuring longer run times and quicker charging capabilities. Moreover, it's environmentally friendly, producing zero emissions while providing the same power and performance expected from gas-powered models.

All models come with ergonomic handles for comfortable operation, and their lightweight design makes them easy to maneuver around obstacles in the yard. Additionally, snap-on components make maintenance a breeze, which is a vital feature for those seeking hassle-free ownership.

In summary, the Snapper 7800596, 7800597, 7800600, 7800601, and 7800602 models bring together cutting-edge technology, robust power, and user-friendly features. Whether you need a gas-powered mower for durable performance or an electric option for silent and clean operation, Snapper ensures that you'll find a suitable lawn mower among these well-engineered machines. With Snapper, lawn care becomes a task of ease and enjoyment, making it the perfect choice for homeowners looking to maintain their outdoor space efficiently.
Top Page Image Contents