Snapper 7800601, 7800600 Maintenance Maintenance Introduction, Service After First 5 Hours

Page 12

Maintenance

Maintenance - Introduction

To retain the quality of the mower, use genuine SNAPPER replacement parts only. Contact a local SNAPPER dealer for parts and service assistance. For the correct part or information for a particular mower, always mention the model and serial number.

Check Grease Level in Transmission

1.Remove the transmission fill plug (A, Figure 14). Roll the machine forward or backward while looking down into the plug hole.

2.If liquid grease is not visible on the input gear (the small gear below the plug hole), add an amount, to cover the gear, of Snapper “00” grease.

Maintenance

!

WARNING

!

A

DO NOT attempt any maintenance, adjustments or service

with engine and blade running. STOP engine and blade.

 

Disconnect spark plug wire and secure away from spark

 

plug. Engine and components are HOT. Avoid serious

 

 

burns, allow sufficient time for all components to cool.

 

 

Wear heavy leather gloves when handling or working

 

 

around cutting blades. Blades are extremely sharp and can

 

cause severe injury.

 

 

 

 

 

Reproduction

Service - After First 5 Hours

 

 

 

Change Engine Oil

 

 

 

 

 

1. Refer to the Engine Manual for proper oil specifications,

 

Figure 14: Rem v ng the transmission fill plug

 

procedures and proper service intervals.

 

 

 

 

 

 

Not

 

Note: Snapper “00” grease (Part No. 7029443) is available at your

2. For the simplest/cleanest oil change, simply urn he

 

 

mower on its side to drain the oil, as sh

wn. Drain

forSnapper dealer.

 

the oil through the dipstick tube (A, Figure 13) into a

 

Note: Do not spill grease or oil onto the surface of the drive disc (A,

 

container. Allow sufficient time for all the

il to drain.

 

 

 

 

 

 

Figure 15).

Important: Drain the fuel tank before tipping the machine.

 

 

 

DO NOT tip the machine with the carburetor or spark plug

 

 

 

down. Oil from the crankcase will saturate the air filter and

 

 

A

cause the engine to be hard to start or not start at all. If

 

 

 

contamination does occur, the air filter will have to be

 

 

 

replaced.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Figure 15: Location of the drive disc

A3. Reinstall the transmission plug.

4. Check the grease level after each 25 hours of operation.

 

 

 

Important: Drain the fuel tank before tipping the mower. DO

 

Figure 13: Draining the engine oil

NOT tip the machine with the carburetor or spark plug down.

 

 

 

Oil from the crankcase will saturate the air filter and cause

3.

Dispose of drain oil properly.

the engine to be hard to start or not start at all. If contamina-

4.

Fill the engine with oil as specified in the Engine Manual.

tion does occur, the air filter will have to be replaced.

 

 

Do not overfill.

 

12

www.snapper.com

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Not Manual No Rev. ‘-’, 10/20/2009Briggs & Stratton Power Products Group, LLC Snapper is a trademarkJefferson, WI, USA Milwaukee, WI, USA. All Rights Reserved Table of Contents Important Operator Safety Instructions Protection for Children PreparationFrom Previous Column Slope OperationMaintenance and Storage Safe Handling of Gasoline OperationFeatures and Controls Features and ControlsOperation Pre-Start Check List Starting and Operation EnginesOperation Handle Height Adjustment OperationStopping Propelling the MowerOperation Recycling Operation Removing the Recycling CoverInstalling the Discharge Deflector Installing the Grass Bag Installing the Recycling PlugDoor Type Bag Grass Catcher bags used Snapper products are madeMaintenance Maintenance Introduction Service After First 5 HoursMaintenance Check Grease Level in TransmissionMaintenance Service PeriodicAge Pr cedure Mower Blade Replacement Standard Blade Wear LimitBlade Sharpening Wheel Drive Control Adjustment Self-Propelled Models Only Reprod Capscrew UctionDriven and Drive Disc Service Drive Spring Repair/ReplacementDriven Disc Adjustment ReprodUction From the outside edge of the drive disc B If the rubberDriven Disc Replacement Maintenance Belt Service Hex ShaftBelts Replacing the Bearing On the Pulley EndTransmiss on P ly-V Belt Replacement Driven Disc Replacement for driven disc removal ProcedureBelts Drain the fuel tank before tipping the mower. Do not tiltService Schedule Maintenance/Replacement PartsTroubleshooting TroubleshootingThere is no other express warranty Improper electrolyteNot For Not For Not For Not For Snapper Products Macon Street McDonough, GA
Related manuals
Manual 28 pages 4.23 Kb

7800596, 7800597, 7800601, 7800602, 7800600 specifications

Snapper has long been known for its quality and innovation in outdoor power equipment, and their recent models, specifically the Snapper 7800596, 7800597, 7800600, 7800601, and 7800602, showcase this legacy perfectly. These lawn mowers combine power, ease of use, and technology to create a superior mowing experience.

The Snapper 7800596 and 7800597 are ideal for homeowners who desire robust performance. Both models are powered by a strong engine that offers reliable starts and efficient mowing. They feature a durable steel deck, ensuring longevity while withstanding the rigors of routine use. A standout feature is their adjustable cutting height, allowing users to choose between various grass lengths, ensuring a tailored cut for different lawn conditions.

Moving on to the Snapper 7800600 and 7800601, these models come equipped with advanced technologies that enhance user experience. The inclusion of a self-propelling mechanism significantly reduces the effort required by the operator, making mowing less of a chore. Furthermore, these mowers are designed with innovative blade technology, which optimizes cutting efficiency and grass discharge, resulting in a cleaner lawn finish.

The Snapper 7800602 rounds out this impressive lineup with its standout feature: a powerful battery-operated option. This model harnesses the latest in battery technology, ensuring longer run times and quicker charging capabilities. Moreover, it's environmentally friendly, producing zero emissions while providing the same power and performance expected from gas-powered models.

All models come with ergonomic handles for comfortable operation, and their lightweight design makes them easy to maneuver around obstacles in the yard. Additionally, snap-on components make maintenance a breeze, which is a vital feature for those seeking hassle-free ownership.

In summary, the Snapper 7800596, 7800597, 7800600, 7800601, and 7800602 models bring together cutting-edge technology, robust power, and user-friendly features. Whether you need a gas-powered mower for durable performance or an electric option for silent and clean operation, Snapper ensures that you'll find a suitable lawn mower among these well-engineered machines. With Snapper, lawn care becomes a task of ease and enjoyment, making it the perfect choice for homeowners looking to maintain their outdoor space efficiently.
Top Page Image Contents