Snapper 7800597, 7800600 Operation, Stopping, Handle Height Adjustment, Propelling the Mower

Page 8

Operation

Operation (Continued)

Starting and Operation (Continued)

Stopping

 

 

Propelling the Mower

 

1. Stop forward motion of the mower by releasing the

 

(Self-Propelled Models Only)

 

wheel drive control.

 

 

1. Start the engine. Refer to the Section entitled “Starting

2. Stop the engine and blade by releasing the blade

 

control.

 

 

and Operation – Engine and Blade”.

 

 

 

 

 

 

2. Move the ground speed control (A, Figure 4) to the

Handle Height Adjustment

 

desired speed position.

 

 

 

 

 

 

 

3. Squeeze the wheel drive control (B) against the handle

The height of the mower handle can be adjusted as follows:

to engage the wheel drive and propel the mower

1. Loosen the lower nuts (A, Figure 5) on each lower

 

forward. Forward speed can be adjusted while the

 

handle.

 

 

mower is moving by changing the position of the

 

 

 

 

 

 

ground speed control.

 

 

 

 

 

 

A

 

 

 

 

B

Reproduction

 

B

 

 

 

 

 

 

 

 

 

 

 

 

 

A

 

Figure 4: Mower drive controls

 

Fig

re 5: Adjusting the handle height

 

 

 

 

 

 

 

 

 

2. Move the handle assembly (B) up or down until the

 

 

 

 

esired position is achieved.

 

 

 

 

3. Tighten the lower nuts each lower handle to maintain

 

 

the desired position.

 

 

 

 

!

WARNING

 

!

 

 

DO NOT attempt any maintenance, adjustments or service

 

 

with engine and blade running. STOP engine and blade.

 

 

Disconnect spark plug wire and secure away from spark

 

 

plug. Engine and components are HOT. Avoid serious

 

 

 

burns, allow sufficient time for all components to cool.

8

www.snapper.com

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Not Manual No Rev. ‘-’, 10/20/2009Jefferson, WI, USA Milwaukee, WI, USA. All Rights Reserved Briggs & Stratton Power Products Group, LLCSnapper is a trademark Table of Contents Important Operator Safety Instructions Protection for Children PreparationFrom Previous Column Slope OperationMaintenance and Storage Safe Handling of Gasoline OperationFeatures and Controls Features and ControlsOperation Operation Pre-Start Check List Starting and OperationEngines Handle Height Adjustment OperationStopping Propelling the MowerOperation Recycling Operation Removing the Recycling CoverInstalling the Discharge Deflector Installing the Grass Bag Installing the Recycling PlugDoor Type Bag Grass Catcher bags used Snapper products are madeMaintenance Maintenance Introduction Service After First 5 HoursMaintenance Check Grease Level in TransmissionAge Pr cedure MaintenanceService Periodic Blade Sharpening Mower Blade ReplacementStandard Blade Wear Limit Wheel Drive Control Adjustment Self-Propelled Models Only Reprod Capscrew UctionDriven and Drive Disc Service Drive Spring Repair/ReplacementDriven Disc Adjustment ReprodUction From the outside edge of the drive disc B If the rubberDriven Disc Replacement Maintenance Belt Service Hex ShaftBelts Replacing the Bearing On the Pulley EndTransmiss on P ly-V Belt Replacement Driven Disc Replacement for driven disc removal ProcedureBelts Drain the fuel tank before tipping the mower. Do not tiltService Schedule Maintenance/Replacement PartsTroubleshooting TroubleshootingThere is no other express warranty Improper electrolyteNot For Not For Not For Not For Snapper Products Macon Street McDonough, GA
Related manuals
Manual 28 pages 4.23 Kb

7800596, 7800597, 7800601, 7800602, 7800600 specifications

Snapper has long been known for its quality and innovation in outdoor power equipment, and their recent models, specifically the Snapper 7800596, 7800597, 7800600, 7800601, and 7800602, showcase this legacy perfectly. These lawn mowers combine power, ease of use, and technology to create a superior mowing experience.

The Snapper 7800596 and 7800597 are ideal for homeowners who desire robust performance. Both models are powered by a strong engine that offers reliable starts and efficient mowing. They feature a durable steel deck, ensuring longevity while withstanding the rigors of routine use. A standout feature is their adjustable cutting height, allowing users to choose between various grass lengths, ensuring a tailored cut for different lawn conditions.

Moving on to the Snapper 7800600 and 7800601, these models come equipped with advanced technologies that enhance user experience. The inclusion of a self-propelling mechanism significantly reduces the effort required by the operator, making mowing less of a chore. Furthermore, these mowers are designed with innovative blade technology, which optimizes cutting efficiency and grass discharge, resulting in a cleaner lawn finish.

The Snapper 7800602 rounds out this impressive lineup with its standout feature: a powerful battery-operated option. This model harnesses the latest in battery technology, ensuring longer run times and quicker charging capabilities. Moreover, it's environmentally friendly, producing zero emissions while providing the same power and performance expected from gas-powered models.

All models come with ergonomic handles for comfortable operation, and their lightweight design makes them easy to maneuver around obstacles in the yard. Additionally, snap-on components make maintenance a breeze, which is a vital feature for those seeking hassle-free ownership.

In summary, the Snapper 7800596, 7800597, 7800600, 7800601, and 7800602 models bring together cutting-edge technology, robust power, and user-friendly features. Whether you need a gas-powered mower for durable performance or an electric option for silent and clean operation, Snapper ensures that you'll find a suitable lawn mower among these well-engineered machines. With Snapper, lawn care becomes a task of ease and enjoyment, making it the perfect choice for homeowners looking to maintain their outdoor space efficiently.
Top Page Image Contents