CONNECTING
POWER SUPPLY
POWER
VOLUME |
Before plugging the power cord into the AC outlet, check to make sure all of the connections have been properly completed. When they have been, carefully plug power cord into outlet.
Press the POWER button on the front panel to power the unit. The display panel will light.
When the unit is initially powered, a brief surge of electricity may cause interference with other electronic equipment on the same circuit. If this occurs, connect the unit to an outlet on a different circuit.
15
BASIC OPERATION
Selecting Sound Source
1.Press any function button (DVD, TUNER, TV, AUX1/2) to select the desired sound source. The appropriate symbol will appear in the display.
2.When the TUNER button is pressed,
the last station listened to will play.
Note: The desired program source will not play
unless it and the selected signal button coincide
with the active program source signal input.
Volume Control
The volume may be adjusted by either turning the large volume knob on the front panel or using the appropriate volume button on the remote control.
Mute
Pressing the MUTE button temporarily mutes every speaker. To resume audio, press MUTE button again.