Snapper 301222BE, 331522KVE, 3314522BVE, 281222BE important safety instructions Operation

Page 3

IMPORTANT SAFETY INSTRUCTIONS

PREPARATION

(Continued From Previous Page)

7.Keep people and pets out of mowing area. Immediately STOP blades, STOP engine, and STOP machine if anyone enters the area.

8.Check shields, deflectors, switches, blade controls and other safety devices frequently for proper operation and location.

9.Make sure all safety decals are clearly legible. Replace if damaged.

10.Protect yourself when mowing and wear safety glasses, long pants and substantial footwear.

11.Know how to STOP blades and engine quickly in preparation for emergencies.

12.Use extra care when loading or unloading the machine into a trailer or truck.

13.Check grass catcher components frequently for signs of wear or deterioration and replace as needed to prevent injury from thrown objects going through weak or worn spots.

OPERATION

1.Mount and dismount machine from left side.

2.Start engine from operator's seat, if possible. Make sure blades are OFF and parking brake is set.

3.DO NOT leave machine with engine running. STOP engine, STOP blades, SET brake, and Remove key before leaving operators position of any reason.

4.DO NOT operate machine unless properly seated with feet on feet rests or pedal(s).

5.STOP BLADES and ENGINE and make sure blades have stopped before removing grass catcher or unclogging mower to prevent loss of fingers or hand.

6.Blades must be OFF except when cutting grass. Set blades in highest position when mowing over rough ground.

7.Keep hands and feet away from rotating blades underneath deck. DO NOT place foot on ground while BLADES are ON or machine is in motion.

8.DO NOT operate machine without entire grass catcher or guards in place. DO NOT point discharge at people, passing cars, windows or doors.

9.Slow down before turning.

10.Watch out for traffic when near or crossing roadways.

11.STOP engine immediately after striking an obstruction. Inspect machine and repair damage before resuming operation.

12.Operate machine only in daylight or with good artificial light.

13.Move joystick (if equipped) SLOWLY to maintain control during speed and directional changes.

OPERATION

(Continued From Previous Column)

14.Exercise CAUTION when pulling loads. Limit loads to those you can safely control and attach loads to hitch plate as specified with SNAPPER attachment instructions.

15.DO NOT operate engine in enclosed areas. Engine exhaust gases contain carbon monoxide, a deadly poison.

MAINTENANCE

1.DO NOT store machine or fuel container inside where fumes may reach an open flame, spark or pilot light such as in a water heater, furnace, clothes dryer or other gas appliance. Allow engine to cool before storing machine in an enclosure. Store fuel container out of the reach of children in a well ventilated, unoccupied building.

2.Keep engine free of grass, leaves or excess grease to reduce fire hazard and engine overheating.

3.When draining fuel tank, drain fuel into an approved container outdoors and away from open flame.

4.Check brakes frequently; adjust, repair or replace as needed.

5.Keep all bolts, nuts and screws properly tight. Check that all cotter pins are in proper position.

6.Always provide adequate ventilation when running engine. Exhaust gases contain carbon monoxide, an odorless and deadly poison.

7.Disconnect negative (black) cable from battery before performing maintenance or service. Cranking engine could cause injury.

8.DO NOT work under machine without safety blocks.

9.Service engine and make adjustments only when engine is stopped. Remove spark plug wire(s) from spark plug(s) and secure wire(s) away from spark plug(s).

10.DO NOT change engine governor speed settings or overspeed engine.

11.Lubricate machine at intervals specified in manual to prevent controls from binding.

12.Mower blades are sharp and can cut. Wrap the blades or wear heavy leather gloves and use CAUTION when handling them.

13.DO NOT test for spark by grounding spark plug next to spark plug hole; spark plug could ignite gas exiting engine.

14.Have machine serviced by an authorized SNAPPER dealer at least once a year and have the dealer install any new safety devices.

15.Use only genuine SNAPPER replacement parts to assure that original standards are maintained.

16.If battery is removed, DO NOT operate engine without insulating Positive + battery cable terminal with electrical tape, or sparking from the battery cables can result

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Manual No -4390 Rev 1, 8/27/01 Rear Engine Riding Mower SeriesImportant Safety Instructions Operation Table of Contents Nomenclature IntroductionPRE-START Check List OPERATOR’S Seat Adjustment 2.2.1. Front to Rear AdjustmentOn Next Starting & Operation Engine Electric StartStarting & Operation Engine Electric StartEngine Manual Start Wheel Drive Starting & Operation 2.3.3. Mower BladeMower Blade Stopping ENGINE, Wheel DRIVE, Blade 2.4.1. EngineCutting Height Adjustment Stopping ENGINE, Wheel DRIVE, Blade 2.4.4. Park BrakeDo not park the machine on slopes Reverse Lockout Mechanism Override Reverse Lockout MechanismService After First 5 Hours Service Engine AIR Cleaner Check Mower BladeChange Engine OIL Service After First 5 Hours 3.2.4. Check Blade Drive Belt Service Brake / Park BrakeBlade Brake Interlock System Service Every 25 Operating HoursBattery Fluid Level Clean Mower DeckRear Axle Bearing Lubrication Front Wheel Bearing LubricationEvery TWO Years Service AnnuallyEngine Fuel FilterRemoving Fuel Tank Blade Brake Adjustment Engine Adjustments & RepairMower Deck Adjustment Front to Rear Levelness 28, & 33 DecksFront to Rear Levelness 30 Decks Mower Drive Belt Adjustment for 28 & 30 Decks only Service BRAKE/PARK Brake Adjustment Blade Sharpening Mower Blade Replacement 4.4.1. Blade Wear Limits28 & 30 Decks Mower Drive Belt ReplacementBelt Replacement Belt RemovalBattery Installation Battery Battery RemovalBattery Testing Battery ServiceBattery Storage NEW Battery Preparation 1. Remove battery from cartonSnapper Rear Engine Rider Accessories Stop Problem Probable Cause Corrective ActionImproperly Loss Of TractionBlades Not Cutting Cutting GrassTo be Performed Pages Subject Service ReferenceMAINTENANCE/REPLACEMENT Parts Maintenance Parts Disclaimer of Warranty Year Limited WarrantyPrimary Maintenance Primary Maintenance Primary Maintenance Primary Maintenance Service Notes Rear Engine Riding Mower Series

301222BE, 281222BE, 3314522BVE, 331522KVE specifications

Snapper 301222BE, 3314522BVE, 281222BE, and 331522KVE are advanced lawn care equipment offerings that cater to both residential and commercial users, emphasizing efficiency, durability, and innovative technology. Each model showcases unique features designed to optimize performance and enhance user experience.

The Snapper 301222BE model is known for its robust build, equipped with a powerful Briggs & Stratton engine that ensures reliable starting and sustained performance. Its Easy Start technology simplifies the ignition process, making it user-friendly even for novice operators. The 21-inch steel cutting deck provides a balanced mowing experience, ensuring even grass cutting with minimal effort. This model also features a dual (Rear and Side) discharge function, giving users flexibility in managing grass clippings.

Similarly, the Snapper 3314522BVE combines a powerful engine with a reinforced steel deck, ensuring durability and longevity. What sets it apart is its cutting-edge Smart Mulching technology, which finely chops grass clippings and redistributes them back into the lawn as natural fertilizer. This not only enhances lawn health but also reduces the need for additional lawn care products. The 3314522BVE also incorporates a user-friendly height adjustment lever, allowing operators to easily switch between cutting heights.

The Snapper 281222BE is designed with an emphasis on compactness without sacrificing power. It features a 19-inch cutting deck and a lightweight design, making it perfect for maneuvering around smaller lawns and tight spaces. The 281222BE also boasts an ergonomic handle for increased comfort during prolonged use, making it a perfect choice for homeowners seeking a practical and effective mowing solution.

On the other hand, the 331522KVE stands out with its innovative technology featuring a variable speed self-propulsion system, allowing users greater control over their mowing speed. This model also includes an integrated grass catcher which efficiently collects clippings, reducing cleanup time after mowing. The high-wheel design on this model enhances stability on uneven terrain, making it suitable for a wide range of lawn conditions.

In summary, Snapper’s range of models, including the 301222BE, 3314522BVE, 281222BE, and 331522KVE, exemplifies a blend of innovative engineering and practical design. With features tailored to meet diverse lawn care needs, these models represent a step forward in enhancing efficiency and ease of use in lawn maintenance. Whether for residential lawns or commercial landscapes, Snapper mowers are designed to deliver exceptional results while ensuring user comfort and satisfaction.
Top Page Image Contents