Snapper 281222BE PRE-START Check List, OPERATOR’S Seat Adjustment 2.2.1. Front to Rear Adjustment

Page 6

Section 2 - OPERATING INSTRUCTIONS

2.1PRE-START CHECK LIST

Make the following checks and perform the service required before each start-up.

2.1.1.Check tires and add or release air as needed to bring pressure to 12 psi in front and 12 psi in rear tires.

2.1.2.Check guards, deflectors and covers to make sure all are in place and securely tightened.

2.1.3.Check engine oil and add oil as needed to bring level up to the FULL mark. Refer to engine owner’s manual for oil specifications. See Figure 2.1.

SAFE LEVEL

AREA

FIGURE 2.1

2.1.4.Adjust seat as needed to most comfortable position. Refer to Section “OPERATOR’S SEAT ADJUSTMENT”.

2.1.5.Check blade control to insure it works freely. If blade pedals are depressed, blade lever can be moved manually from “ON” to “OFF” to stop blade.

2.1.6.Check Reverse Lockout Mechanism. With blade pedals depressed, shift lever must not go into reverse.

2.1.7.Clean exterior surfaces of cutting deck and engine of any accumulation of dirt, grass, oil, etc. Keep engine air intake screen and cooling fins clear at all times.

2.1.8.Add fuel to tank after pushing the Rear Engine Rider outside where fumes can dissipate. Make sure fuel filler cap is tight and vent is open after refueling. Refer to engine owner’s manual for fuel specifications. See Figure 2.2.

2.2 OPERATOR’S SEAT ADJUSTMENT 2.2.1. FRONT TO REAR ADJUSTMENT

1.With the engine stopped, loosen the two adjusting knobs and move seat to desired position. After adjustment, tighten knobs securely. If seat does not move after loosening knobs, it may be necessary to loosen the 5/16” patch lock screws located at the rear of the seat using a 1/2 inch wrench. See Figure 2.3.

OPERATOR’S

SEAT

ADJUSTING

KNOBS

5/16” PATCH LOCK SCREWS (DO NOT OVERTIGHTEN)

FIGURE 2.3

OPEN

FUELVENT FILLER

CAP

FUEL

TANK

FIGURE 2.2

6

Image 6
Contents Rear Engine Riding Mower Series Manual No -4390 Rev 1, 8/27/01Important Safety Instructions Operation Table of Contents Introduction NomenclatureOPERATOR’S Seat Adjustment 2.2.1. Front to Rear Adjustment PRE-START Check ListStarting & Operation Engine Electric Start On NextStarting & Operation Engine Electric StartEngine Manual Start Starting & Operation 2.3.3. Mower Blade Wheel DriveStopping ENGINE, Wheel DRIVE, Blade 2.4.1. Engine Mower BladeCutting Height Adjustment Stopping ENGINE, Wheel DRIVE, Blade 2.4.4. Park BrakeDo not park the machine on slopes Reverse Lockout Mechanism Reverse Lockout Mechanism OverrideService After First 5 Hours Service Engine AIR Cleaner Check Mower BladeChange Engine OIL Service After First 5 Hours 3.2.4. Check Blade Drive Belt Service Brake / Park BrakeBlade Brake Clean Mower Deck Service Every 25 Operating HoursBattery Fluid Level Interlock SystemFront Wheel Bearing Lubrication Rear Axle Bearing LubricationFuel Filter Service AnnuallyEngine Every TWO YearsRemoving Fuel Tank Engine Adjustments & Repair Blade Brake AdjustmentMower Deck Adjustment Front to Rear Levelness 28, & 33 DecksFront to Rear Levelness 30 Decks Mower Drive Belt Adjustment for 28 & 30 Decks only Service BRAKE/PARK Brake Adjustment Mower Blade Replacement 4.4.1. Blade Wear Limits Blade SharpeningBelt Removal Mower Drive Belt ReplacementBelt Replacement 28 & 30 DecksBattery Battery Removal Battery InstallationNEW Battery Preparation 1. Remove battery from carton Battery ServiceBattery Storage Battery TestingSnapper Rear Engine Rider Accessories Problem Probable Cause Corrective Action StopCutting Grass Loss Of TractionBlades Not Cutting ImproperlySubject Service Reference To be Performed PagesMAINTENANCE/REPLACEMENT Parts Maintenance Parts Year Limited Warranty Disclaimer of WarrantyPrimary Maintenance Primary Maintenance Primary Maintenance Primary Maintenance Service Notes Rear Engine Riding Mower Series

301222BE, 281222BE, 3314522BVE, 331522KVE specifications

Snapper 301222BE, 3314522BVE, 281222BE, and 331522KVE are advanced lawn care equipment offerings that cater to both residential and commercial users, emphasizing efficiency, durability, and innovative technology. Each model showcases unique features designed to optimize performance and enhance user experience.

The Snapper 301222BE model is known for its robust build, equipped with a powerful Briggs & Stratton engine that ensures reliable starting and sustained performance. Its Easy Start technology simplifies the ignition process, making it user-friendly even for novice operators. The 21-inch steel cutting deck provides a balanced mowing experience, ensuring even grass cutting with minimal effort. This model also features a dual (Rear and Side) discharge function, giving users flexibility in managing grass clippings.

Similarly, the Snapper 3314522BVE combines a powerful engine with a reinforced steel deck, ensuring durability and longevity. What sets it apart is its cutting-edge Smart Mulching technology, which finely chops grass clippings and redistributes them back into the lawn as natural fertilizer. This not only enhances lawn health but also reduces the need for additional lawn care products. The 3314522BVE also incorporates a user-friendly height adjustment lever, allowing operators to easily switch between cutting heights.

The Snapper 281222BE is designed with an emphasis on compactness without sacrificing power. It features a 19-inch cutting deck and a lightweight design, making it perfect for maneuvering around smaller lawns and tight spaces. The 281222BE also boasts an ergonomic handle for increased comfort during prolonged use, making it a perfect choice for homeowners seeking a practical and effective mowing solution.

On the other hand, the 331522KVE stands out with its innovative technology featuring a variable speed self-propulsion system, allowing users greater control over their mowing speed. This model also includes an integrated grass catcher which efficiently collects clippings, reducing cleanup time after mowing. The high-wheel design on this model enhances stability on uneven terrain, making it suitable for a wide range of lawn conditions.

In summary, Snapper’s range of models, including the 301222BE, 3314522BVE, 281222BE, and 331522KVE, exemplifies a blend of innovative engineering and practical design. With features tailored to meet diverse lawn care needs, these models represent a step forward in enhancing efficiency and ease of use in lawn maintenance. Whether for residential lawns or commercial landscapes, Snapper mowers are designed to deliver exceptional results while ensuring user comfort and satisfaction.