Snapper WP216517B, P2167517BVE important safety instructions Operation

Page 3

IMPORTANT SAFETY INSTRUCTIONS

OPERATION

1.DO NOT put hands or feet near or under rotating parts. Keep clear of discharge area while engine is running.

2.STOP engine when crossing gravel drives, walks, or roads, and under any conditions where thrown objects might be a hazard.

3.Mow only in daylight or good artificial light.

4.DO NOT operate mower while under the influence of alcohol or drugs.

5.After striking a foreign object or if mower

vibrates abnormally, STOP the engine, disconnect and secure spark plug wire. Inspect the mower for any damage and repair the damage.

6.DO NOT mow near drop offs, ditches or

embankments. Operator could lose footing or balance.

7.STAY ALERT for holes and other hidden hazards. Tall grass can hide obstacles. Keep away from ditches, washouts, culverts, fences and protruding objects.

8.DO NOT mow on wet grass. Always be sure of your footing. Keep a firm hold on the handle and walk, never run. Slipping could cause injury.

9.DO NOT leave the machine with the engine running. STOP BLADE and STOP ENGINE before leaving the operators position for any reason.

10.Before cleaning, repairing or inspecting make certain engine, blade and all moving parts have STOPPED. Disconnect and secure spark plug wire away from plug to prevent accidental starting.

11.STOP engine and wait until the blade comes to complete STOP before removing grass bag and/or clearing grass.

12.DO NOT operate mower without the entire grass catcher or guards in place. DO NOT point

discharge at people, passing cars, windows or doors.

13.Slow down before turning.

14.Watch out for traffic when near or crossing roadways.

15.DO NOT operate engine in enclosed areas.

Engine exhaust gases contain carbon monoxide, a deadly poison.

MAINTENANCE AND STORAGE

1.DO NOT store mower or fuel container inside

where fumes may reach an open flame, spark or pilot light such as in a water heater, furnace, clothes dryer or other gas appliance. Allow engine to cool before storing machine in an enclosure. Store fuel container out of reach of

children in a well ventilated, unoccupied building.

2.Keep mower and engine free of grass, leaves or excess grease to reduce fire hazard and engine overheating.

3.When draining fuel tank, drain fuel into an approved container outdoors and away from open flame.

4.Keep all bolts, especially blade bolts, nuts and screws properly tight. Check that all cotter pins are in proper position.

5.Always provide adequate ventilation when running engine. Engine exhaust gases contain carbon monoxide, a deadly poison.

6.Service engine and make adjustments only when engine is stopped. Removed spark plug wire from spark plug and secure wire away from spark plug to prevent accidental starting.

7.DO NOT change engine governor speed settings or overspeed engine.

8.Check grass bag assembly frequently for wear or deterioration to avoid thrown objects and exposure to moving parts. Replace with new bag if loose seams or tears are evident. Replace slider or bag adapter if broken or cracked.

9.Mower blades are sharp and can cut. Wrap the blades or wear heavy leather gloves and use CAUTION when handling them.

10.DO NOT test for spark by grounding spark plug next to spark plug hole; spark plug could ignite gas exiting engine.

11.Have machine serviced by an authorized

SNAPPER dealer at least once a year and have the dealer install any new safety devices.

12.Use only genuine SNAPPER replacement parts

to assure that original standards are maintained.

13.If battery is removed, DO NOT operate engine without insulating Positive + battery cable terminal with electrical tape, or sparking from battery cables can result.

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Model Number Explanation Steel Deck Walk Mowers SeriesGeorgia 30253. Phone Important Safety InstructionsOperation Contents Introduction Nomenclature Briggshonda Engineengine Speedspeed ControlcontrolPRE-START Check List Starting & Operation Engine & BladeRecoil Start Models Starting & Operation 2.2.1. Engine & Blade Propelling MowerStopping Cutting Height Adjustment Handle Height AdjustmentOn Next Installation of Grass BAG AdapterInstallation of Grass BAG Door Type Bag Recycling OperationRemoving and Dumping Grass Catcher Installation of Grass Catcher Slide Closure TypeInstall Slide Discharge Deflector Slot Dispose of drain oil properly Service After First 5 Hours 3.2.1. Change Engine OILIntroduction Important Drain fuel tank before tipping machineCheck Transmission POLY-V Belt Storage ProcedureCheck Mower Blade Check Engine Drive BeltDJDO Notuseon Mower Mower Blade Replacement Standard Blade Wear LimitWearlimit Blade SharpeningAre for self-propelled models only Wheel Drive Control AdjustmentImportant If machine drive system continues Driven and Drive Disc ServiceCleaning Drive Disc & Driven Disc Driven Disc AdjustmentReplacing Rubber Driven Disc Install NEW Driven Disc Engine Drive Belt Replacement Stretch Type Belts Belt ServiceDeckbracket Pulley PositionBattery Storage Battery Service NEW Battery PreparationBattery Testing Battery Service 1. Remove batteryTroubleshooting Service Performed Each USE HRS MAINTENANCE/REPLACEM ENT PartsHRS HR8 HR8 Season Disclaimer of Warranty Year Limited WarrantyIllustration of how dirt can How Maintenance can protect it Cost YOU Money Check OIL Level Before Each START-UP Starting Check List Snapper Product Registration Form Page Page Steel Deck Walk Behind Mowers Series

WP216517B, P2167517BV, P2167517BVE, 2167517BV specifications

The Snapper P2167517BV is a highly efficient walk-behind lawn mower that epitomizes power and convenience in residential lawn care. This model is well-regarded for its robust design and cutting-edge technologies, making it a preferred choice for homeowners seeking a reliable mowing solution.

One of the standout features of the Snapper P2167517BV is its innovative design that combines durability with user-friendly operation. The mower is equipped with a powerful engine, which provides ample torque for tackling tough grass and challenging terrain. The self-propelled functionality allows users to effortlessly navigate their lawns without excessive manual effort, making the mowing experience much more enjoyable.

The P2167517BV is designed with a 21-inch steel cutting deck, which not only offers a wide cutting path for increased efficiency but also ensures longevity and resistance to wear. This mower supports multiple cutting heights, enabling users to adjust the blade position quickly. This versatility is perfect for maintaining different grass types and adapting to changing weather conditions.

In terms of technology, the Snapper P2167517BV incorporates a reliable electric start feature, eliminating the hassle of recoil starting. This system delivers reliable power at the push of a button, catering to users who value convenience and efficiency. The mower is also equipped with an exceptional bagging system that effectively collects clippings, promoting a clean lawn and simplifying post-mowing cleanup.

Another notable characteristic of the P2167517BV is its foldable handle design, which promotes easy storage while minimizing the space required. This feature is particularly appealing to those with limited storage areas.

In summary, the Snapper P2167517BV is a powerful and efficient lawn mower designed for residential use. Its combination of a durable steel cutting deck, robust engine performance, adjustable cutting heights, electric start, and superior grass collection technology makes it an ideal choice for homeowners. The emphasis on user-friendliness and storage convenience further enhances its appeal, cementing its status as one of the leading models in its category. Whether tackling a small yard or a larger expanse, the Snapper P2167517BV promises reliability, performance, and an exceptional mowing experience.
Top Page Image Contents