Snapper P2167517BVE, WP216517B Recycling Operation, Installation of Grass BAG Adapter, On Next

Page 9

Section 2 - OPERATING INSTRUCTIONS

WARNING

DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

2.6RECYCLING OPERATION

NOTE: For best recycling results, cut up to a maximum of 1/3 of grass blade length and recycle ONLY when grass is dry.

1.Set all wheels in the highest cutting position (Notch 6).

2.Move engine speed control to "FAST" (Rabbit) position.

3.Move ground speed control to slowest speed setting.

4.Proceed mowing slowly. If grass is very dense, lower each rear wheel latch one notch lower than the front

wheel latches to improve recycling performance.

2.8INSTALLATION of RECYCLING PLUG (Optional Accessory on Some Models)

STEP 1: Once adapter has been installed, recycling may be desired. Insert recycling plug completely and securely into adapter. Install grass bag. See Figure 2.12.

 

INSERT RECYCLING PLUG

PLUG

COMPLETELY

AND SECURELY

 

INTO ADAPTER.

INSTALL

 

GRASS BAG.

 

2.7INSTALLATION of GRASS BAG ADAPTER

STEP 1: Install the grass bag adapter and secure to the side and top of the deck with the two nuts provided on the machine. Slot in front edge of adapter must be under nut located on top of deck. See Figure 2.11.

SECURE ADAPTER

TO DECK WITH NUTS

SECURE

WITH NUTS

ADAPTER

FIGURE 2.11

FIGURE 2.12

2.9INSTALLATION of GRASS BAG (Door Type Bag)

Instal grass bag by sliding connector over flange of adapter. See Figure 2.13.

POSITION BAG

BETWEEN

SLIDE

CONNECTOR

DOWN OVER BAG

ADAPTER FLANGE

BAG

ADAPTER

FIGURE 2.13

(Continued on Next Page)

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Model Number Explanation Steel Deck Walk Mowers SeriesGeorgia 30253. Phone Important Safety InstructionsOperation Contents Introduction Nomenclature Briggshonda Engineengine Speedspeed ControlcontrolPRE-START Check List Starting & Operation Engine & BladeRecoil Start Models Starting & Operation 2.2.1. Engine & Blade Propelling MowerStopping Cutting Height Adjustment Handle Height AdjustmentInstallation of Grass BAG Door Type Bag Installation of Grass BAG AdapterRecycling Operation On NextRemoving and Dumping Grass Catcher Installation of Grass Catcher Slide Closure TypeInstall Slide Discharge Deflector Slot Introduction Service After First 5 Hours 3.2.1. Change Engine OILImportant Drain fuel tank before tipping machine Dispose of drain oil properlyCheck Mower Blade Storage ProcedureCheck Engine Drive Belt Check Transmission POLY-V BeltWearlimit Mower Blade Replacement Standard Blade Wear LimitBlade Sharpening DJDO Notuseon MowerAre for self-propelled models only Wheel Drive Control AdjustmentCleaning Drive Disc & Driven Disc Driven and Drive Disc ServiceDriven Disc Adjustment Important If machine drive system continuesReplacing Rubber Driven Disc Install NEW Driven Disc Engine Drive Belt Replacement Stretch Type Belts Belt ServiceDeckbracket Pulley PositionBattery Testing Battery Service NEW Battery PreparationBattery Service 1. Remove battery Battery StorageTroubleshooting Service Performed Each USE HRS MAINTENANCE/REPLACEM ENT PartsHRS HR8 HR8 Season Disclaimer of Warranty Year Limited WarrantyIllustration of how dirt can How Maintenance can protect it Cost YOU Money Check OIL Level Before Each START-UP Starting Check List Snapper Product Registration Form Page Page Steel Deck Walk Behind Mowers Series

WP216517B, P2167517BV, P2167517BVE, 2167517BV specifications

The Snapper P2167517BV is a highly efficient walk-behind lawn mower that epitomizes power and convenience in residential lawn care. This model is well-regarded for its robust design and cutting-edge technologies, making it a preferred choice for homeowners seeking a reliable mowing solution.

One of the standout features of the Snapper P2167517BV is its innovative design that combines durability with user-friendly operation. The mower is equipped with a powerful engine, which provides ample torque for tackling tough grass and challenging terrain. The self-propelled functionality allows users to effortlessly navigate their lawns without excessive manual effort, making the mowing experience much more enjoyable.

The P2167517BV is designed with a 21-inch steel cutting deck, which not only offers a wide cutting path for increased efficiency but also ensures longevity and resistance to wear. This mower supports multiple cutting heights, enabling users to adjust the blade position quickly. This versatility is perfect for maintaining different grass types and adapting to changing weather conditions.

In terms of technology, the Snapper P2167517BV incorporates a reliable electric start feature, eliminating the hassle of recoil starting. This system delivers reliable power at the push of a button, catering to users who value convenience and efficiency. The mower is also equipped with an exceptional bagging system that effectively collects clippings, promoting a clean lawn and simplifying post-mowing cleanup.

Another notable characteristic of the P2167517BV is its foldable handle design, which promotes easy storage while minimizing the space required. This feature is particularly appealing to those with limited storage areas.

In summary, the Snapper P2167517BV is a powerful and efficient lawn mower designed for residential use. Its combination of a durable steel cutting deck, robust engine performance, adjustable cutting heights, electric start, and superior grass collection technology makes it an ideal choice for homeowners. The emphasis on user-friendliness and storage convenience further enhances its appeal, cementing its status as one of the leading models in its category. Whether tackling a small yard or a larger expanse, the Snapper P2167517BV promises reliability, performance, and an exceptional mowing experience.
Top Page Image Contents