Snapper P2167517BV PRE-START Check List, Starting & Operation Engine & Blade, Recoil Start Models

Page 6

Section 2 - OPERATING INSTRUCTIONS

2.1PRE-START CHECK LIST

Make the following checks and perform the service required before each start-up.

2.1.1.Check guards, deflectors, grass bag, adapter and covers to make sure all are in place and securely tightened.

2.1.2.Check blade control and wheel drive control to insure they work freely. See Figure 2.1.

BLADE

CONTROL

WHEEL

DRIVE

CONTROL

ENGINE SPEED

CONTROL

FIGURE 2.1

2.1.3.Check cutting height. Adjust to desired height.

2.1.4.Check engine oil and add oil as needed to bring level up to the full mark. Refer to Engine Owner's Manual for oil specifications. See Figure 2.2.

2.1.6.Clean exterior surfaces of cutting deck and engine of any accumulation of spilled fuel, dirt, grass, oil, etc. Keep engine air intake screen and cooling fins clear at all times.

2.2STARTING & OPERATION

2.2.1.ENGINE & BLADE

(Recoil Start Models)

1.Move engine speed control to the "Fast" (Rabbit) position. See Figure 2.3.

1A. Fixed engine speed models go to Step 2.

NOTE: Stop the engine (and blade) by releasing the blade control.

ROPE STAR'r

HANDLEBLADE

IGNITION

KEY

ENGINESPEED

CONTROL

(SHOWNIN FAST

FIGURE 2.3

2.Push primer bulb three times to start a cold engine. NOTE: Primer should not be required to restart a hot engine. See Figure 2.4.

3.Pull blade control against handle.

4.Pull rope start handle to crank engine.

5.After engine starts, allow a brief warm-up until engine runs smooth.

PRIMER

FIGURE 2.2

2.1.5.Add fuel to tank after pushing the mower outside where fumes can safely dissipate. Make sure cap is tightened after refueling. Refer to Engine Owners Manual for specifications.

FIGURE 2.4

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Steel Deck Walk Mowers Series Model Number ExplanationImportant Safety Instructions Georgia 30253. PhoneOperation Contents Briggshonda Engineengine Speedspeed Controlcontrol Introduction NomenclaturePRE-START Check List Starting & Operation Engine & BladeRecoil Start Models Starting & Operation 2.2.1. Engine & Blade Propelling MowerStopping Handle Height Adjustment Cutting Height AdjustmentRecycling Operation Installation of Grass BAG AdapterInstallation of Grass BAG Door Type Bag On NextInstallation of Grass Catcher Slide Closure Type Removing and Dumping Grass CatcherInstall Slide Discharge Deflector Slot Important Drain fuel tank before tipping machine Service After First 5 Hours 3.2.1. Change Engine OILIntroduction Dispose of drain oil properlyCheck Engine Drive Belt Storage ProcedureCheck Mower Blade Check Transmission POLY-V BeltBlade Sharpening Mower Blade Replacement Standard Blade Wear LimitWearlimit DJDO Notuseon MowerWheel Drive Control Adjustment Are for self-propelled models onlyDriven Disc Adjustment Driven and Drive Disc ServiceCleaning Drive Disc & Driven Disc Important If machine drive system continuesReplacing Rubber Driven Disc Install NEW Driven Disc Belt Service Engine Drive Belt Replacement Stretch Type BeltsPulley Position DeckbracketBattery Service 1. Remove battery Battery Service NEW Battery PreparationBattery Testing Battery StorageTroubleshooting Service Performed Each USE HRS MAINTENANCE/REPLACEM ENT PartsHRS HR8 HR8 Season Year Limited Warranty Disclaimer of WarrantyIllustration of how dirt can How Maintenance can protect it Cost YOU Money Check OIL Level Before Each START-UP Starting Check List Snapper Product Registration Form Page Page Steel Deck Walk Behind Mowers Series

WP216517B, P2167517BV, P2167517BVE, 2167517BV specifications

The Snapper P2167517BV is a highly efficient walk-behind lawn mower that epitomizes power and convenience in residential lawn care. This model is well-regarded for its robust design and cutting-edge technologies, making it a preferred choice for homeowners seeking a reliable mowing solution.

One of the standout features of the Snapper P2167517BV is its innovative design that combines durability with user-friendly operation. The mower is equipped with a powerful engine, which provides ample torque for tackling tough grass and challenging terrain. The self-propelled functionality allows users to effortlessly navigate their lawns without excessive manual effort, making the mowing experience much more enjoyable.

The P2167517BV is designed with a 21-inch steel cutting deck, which not only offers a wide cutting path for increased efficiency but also ensures longevity and resistance to wear. This mower supports multiple cutting heights, enabling users to adjust the blade position quickly. This versatility is perfect for maintaining different grass types and adapting to changing weather conditions.

In terms of technology, the Snapper P2167517BV incorporates a reliable electric start feature, eliminating the hassle of recoil starting. This system delivers reliable power at the push of a button, catering to users who value convenience and efficiency. The mower is also equipped with an exceptional bagging system that effectively collects clippings, promoting a clean lawn and simplifying post-mowing cleanup.

Another notable characteristic of the P2167517BV is its foldable handle design, which promotes easy storage while minimizing the space required. This feature is particularly appealing to those with limited storage areas.

In summary, the Snapper P2167517BV is a powerful and efficient lawn mower designed for residential use. Its combination of a durable steel cutting deck, robust engine performance, adjustable cutting heights, electric start, and superior grass collection technology makes it an ideal choice for homeowners. The emphasis on user-friendliness and storage convenience further enhances its appeal, cementing its status as one of the leading models in its category. Whether tackling a small yard or a larger expanse, the Snapper P2167517BV promises reliability, performance, and an exceptional mowing experience.
Top Page Image Contents